Reviews Ceramic Igniter

Universal Ignitor, 120V Silicon Nitride Hot Rod Ignitor Replacement for Silicon Carbide Igniters of Gas-Fired Forced-air Furnaces, Water Heater and Boiler, Nitride Heater Igniter

  • ...eading or changing small(if the igniter has continuity, then your multimeter should read between 9 - 17 ohms), and you have to replace the nitride igniter.
  • Materials: Consists of stainless steel 304 bright finish bracket, 1.97" nitride heating element, 1.18" ceramic insulator body, non-glazed 95% aluminia polished finish, 15-3/4" 20AWG/ UL 10362 specification 250°C temperature-resistance cable.
  • Hot Side Ignitor/Igniter Specification: Rated voltage: AC 120V +/- 10%-15%, 50/60HZ, Cold resistance: 9-17Ω, Rated power: 150W, Temperature at 120v ± 0.5v. 60HZ at 17 sec ≧1180 ℃, Anti-overvoltage ability: igniter energized for 1 minute -132V. Igniter current not allowed to increase from 30 seconds to 60 seconds, the front required to move the stand is 10 lbs, Minimum≧5kgf.
  • Easy to Install: Very simple, strong structure, not easy to damage, use high-quality packaging, waterproof and drop-proof, ensures that you can receive the perfect igniter. If you have any questions, you can contact us in time, we will reply within 12 hours.
Check Stock

MCAMPAS Igniter Ceramic Electrode Replacement Part .27.56-inch Ignitor Wire &Ceramic Spark Plug Ignition ​Electrode for Fire Pit Burner Gas Grill Burner ​2 Pack​

  • ➦2 Pieces ：27.56 inch(700mm) Ignitor Wire with M10*1 Ceramic Electrode length 55mm,product high temperature 200°C.
  • ➦Universal spark with M10*1 thread includes two nuts to fix on your fire pit pan plate.
  • ➦Please note that the connection to the igniter is circular, suitable for pressing the igniter.
  • The end of the terminal is in round with 2.3mm....
  • ➦Igniter ceramic electrode universally fit for many fire pit table pan,also fit BBQ grill burner, gas stove, grill, heater.Please check and compare....
  • ➦Made of high quality material ensure safe and long-lasting performance. There is a heat resistance coating over the wire to ensure safe use. will....
Check Stock

WAITCOOK 12V Ceramic Hot Rod Igniter Replacement Parts for Green Mountain Prime Daniel Boone and Prime Jim Bowie Wood Pellet Grill Ledge and Peak Prime Pellet Grill

  • 【Applicable Model】:Replacement for Model # P-1217 | P-1271,Compatible with green mountain grills 12v prime grill igniter for Prime....
  • 【12 Volt Ceramic Igniter Element】:12V 100 Watt,GMG Igniter for Daniel Boone, Ledge 12V PRIME and Jim Bowie, Peak 12V PRIME....
  • 【Package Include】:1pc * GMG prime ceramic ignitor/hot rod.
  • 【Easy to Install】:The installation is very simple, plug and play. If you have any questions about the installation, you can send us an....
  • 【Take Care】:If you have any questions about the fit models.Don't hesitate to contact us via email or "amazon message".We will help you....
Check Stock

Green Mountain Grills 12V 80W Igniter for Jim Bowie and Daniel Boone Prime Models GMGP-1271

  • GMG 12V DC 80 watt Igniter for Prime Daniel Boone (DB) & Jim Bowie (JB) Wood Pellet Grills. Part # GMG P-1271. Replaces part # GMG P12V-1028..
  • This is an upgraded igniter for the GMG Prime Daniel Boone & Jim Bowie Grills. It is a direct replacement for the Prime Plus Daniel Boone & Jim Bowie....
  • This new ceramic igniter heats up faster and lasts longer (Approx 100,000 cycles) Care must be taking when vacuuming ash under the igniter in the burn....
  • Note: NEVER unplug the grill without running through fan mode. Press the red power button to switch the grill into fan mode. DO NOT unplug the grill....
  • This part is not appropriate for the Choice model pellet grills..
Check Stock

Replace parts 67847 Grill Igniter Kit Replacement for Weber Genesis 300 Series 2008-2010

  • Replacement for Weber model part numbers (number located inside cabinet doors below cooking box): 83740101, 83741001, 83741301, 83750101, 83750201,....
  • Replacement for Weber 67847 igniter kit for - Genesis 300 Series(Model Years 2008 - 2010) include:E-310, E-320, EP-310, EP-320, S-310, S-320, CEP-310,....
  • Replacement igniter kit for 2008-2010 Genesis 300 series grills (67847).
  • This ignitor kit includes 1 igniter module, 1 push buttons,1 white ceramic U-shaped sparking device. Powered by 1 AAA battery(NOT INCLUDED).
Check Stock

RCK Sales Members Mark Gas Grill SAMS Club Charbroil Igniter Collector Box with Electrode 3 Three Pack

  • Members Mark Gas Grill Sams Club Igniter Collector Box with Electrode (3) Three Pack.
  • Collector Box and Ceramic Electrode Assembly (3) Pack of Igniters included with same.
  • Over all Size: 3 7/8" x 1 1/4" Threaded section 2 1/8" 1/2" Probe at bottom Has a round male end connector at the bottom of igniter.
  • Grill Chef SS525-B, SS525-BNG, SS639, SS72B Fits Char-broil 4632215,463221503,4632220,463323503 Ken-more....
  • Alway Measure and compare your old igniter to the replacements.
Check Stock

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Exact Replacement Igniter for Samsung NX58H5600SS/AA-0000 NX58H5650WS/AA-0000 Range Oven

  • Gas Range Oven Igniter part number 41-230..
Check Stock

Snap Supply Range Igniter for GE Directly Replaces WB13K21

  • This Range Igniter Directly Replaces the following Part #’s: ERWB13K21, WB13T10045, WB13K14, WB13K13, WB13K12, WB13K10026, WB13K10009, WB13K0021, WB13K0014, WB13K0013, WB13K0012, AP3202322, 1085573, AH952863, EA952863, PS952863, AP2020569, 2494, AH231280, EA231280, PS231280.
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last..
  • Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty..
  • Installation Instructions available on our website! Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts..
  • Compatible with the following Range brands: General Electric, Kenmore, Hotpoint..
Check Stock