Reviews Cement Ball Mill

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Electric Grain Mill Corn Grinder, Wheat Grinder Machine Heavy Duty 2 IN 1 Commercial Mill Dry Wet 110V Cereals Corn Grain Wheat Feed Machine DIY Home

  • 【Premium Material】The DY368 grain mill is a sturdy mill with an aluminum hopper that can hold up to 4L of grains at one time, and it's easy to build your own hopper extension if you need to fit more than this in the hopper. It features an alloy block frame that houses two rollers on stainless steel real ball bearing instead of oil-impregnated bronze bushings..
  • 【Powerful & Efficient】This high quality, precision-machined DY368 mill is easy to set up and use. Just using a 60w gear motor at 75 RPM gives you a crush rate of 20kg(44 pounds) per hour making the big grain bills fast and easy..
  • 【Wide Applicability】Commercial electric corn grinder is suitable for grinding bean curd, starch, rice flour, corn and used in other food industries. Multi-functional grinder, cereal, beans, seasoning. DIY your favorite coffee or other food, the best life assistant..
  • 【Pro Grain Mill】Using real bearing for the roller instead of brass bushings. Real ball bearings not only make the lifetime of the mill longer also make the whole grinding process more efficient. The DY368 grain mill is perfect for large batches and high efficiency milling..
  • 【Main Parameters】Type: Electric grain grinder. Materials: Stainless steel roller, 6061 Aluminum for the mill body and h....
Check Stock

HQMaster Tapered Ball Nose End Mill 1/8 inch Shank Tungsten Carbide Cutter 3D Woodworking Tool CNC Router Bits D=1.0mm

  • SIZE: Ball Radius: 0.5mm (Cutting Diameter: 1.0mm), 1/8” shank, Flute Length: 15mm, Overall Length: 1-1/2".
  • TIALCN coating is a nano coating, which means it’s extremely hard, and can be used at high temperatures and still yield low friction. Package include: 5 pcs Tapered Ball Nose Carving End Mill.
  • Package include: 5 pcs Tapered Ball Nose Carving End Mill.
  • Fit for CNC, Engraving machine. Ideal for Plywood, hardwood, acrylic, 3D carving.
Check Stock

Stainless Steel Rotary Food Mill Potato Ricer Home Kitchen Tool with 3 Milling Discs Great for Making Tomatoes Puree or Soups of Vegetables, Baby Foods, Easy Clean & Easy Assemble

  • ✅ Premium Stainless Steel: The food mill is made of high-quality stainless steel, and stainless steel has strong corrosion resistance, eco-friendly and healthy, making the product not easy to deform or abrase..
  • ✅ Non-slip Handle: The food mill features the nonslip handle and round ball-a stainless steel bowl with 2 non-slip handles, so you can put it on the pot or bowl to prevent soiling and easily hold hot food. The end of the crank handle has a super soft round ball that can be easily held and moved..
  • ✅ Premium Crank: The food mill features the multifunctional crank, which is suitable for festive events, and it is very suitable for grinding and pureeing food, used to make soup, applesauce, baby food or seasoning, and it can be used to make smooth puree or to remove the seeds, stems and skins of fruits or vegetables..
  • ✅ Fine Appearance: The food mill features the beautiful appearance, sophisticated craftsmanship, highlighting the quality of life..
  • ✅ Smooth and Beautiful: The food mill is carefully polished, featured by rounded and smooth corners that are harmless to hands, which is beautiful and easy to clean..
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Malted Barley Grain Mill for Homebrew Beer by Brew-Control

  • Includes a 7.7LB Hopper, 2 Stainless 12 TPI knurled Stainless Steel rollers, 4 Ball Bearing, wooden base with locator feet and crank handle..
  • The mill end plates are made from tough 1/2" aluminum plate to prevent the Stainless Steel roller from spreading..
  • Although the mill gap is adjustable, our grain mill is set to the right gap to start crushing grain right out of the box..
  • Our mill ships with a crank handle but it's just as easily to run with a 3/8" or 1/2" battery powered or electric drill - just remove the handle..
  • The sturdy wooden base has three locator feet to securely center on a 5 or 6.5 gallon (11.8-13.8 inch in diameter) brew bucket..
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

5PCS R0.5-3mm Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool End Mill Set Includes 5 Radius Sizes Of 0.5mm 1mm 1.5mm 2mm 3mm

  • Applicable Materials: ball mill bit usually used for steel（Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.）.
  • Ball End Mill Specification -- Cutting Diameter: 1 - 6MM（1mm 2mm 3mm 4mm 6mm），Shank Diameter:4 - 6MM（4mm 4mm 4mm 4mm 6mm），Cutting Length:2 - 12MM（2mm 4mm 6mm 8mm 12mm），Overall Length:50MM.
  • Wide Compatibility: ball nose end mill set are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
  • High Quality:made from solid tungsten carbide (TC)，have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear..
  • Used it strictly for steel, it worked great for that, eats metal fast ，beautiful surface finish!Watch your stick out and travel speeds..
Check Stock

18000RMP Electric Milkshakeing Machine, 180W 110V 3 Head Stand Mixer Commercial Stainless Steel Drink Mixer Machine Smoothie Malt Blender (Triple Head)

  • ...t both ends to give uniform crush. Adjustable range: 0 - 0.065". Heavy-duty two-roller mill with adjustable gap-spacing. Features integral drive shaft and axles. The hopper holds 4KG at one time..
  • ✅【DY368 Grain Mill】We are using real bearing for the roller. Real ball bearings not only make the lifetime of the mill longer also make the whole grinding process more efficient. This high quality, precision-machined DY368 mill is easy to set up and use. Just using a 40w gear motor at 75 RPM gives you a crush rate of 22 pounds per min making the big grain bills fast and easy. The DY368 grain mill is perfect for large batches and high efficiency milling..
  • ✅【Easy To Clean and Store】Resist to scratch and corrosion.
  • compact and lightweight, perfect size for everyday use in the kitchen, dishwasher-safe work bowl, lid and blade..
  • ✅【Muli Function】Eco-friendly design, stainless steel material. Multi-functional grinder, cereal, beans, seasoning. DIY your favorite coffee or other food, the best life assistant..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock