Reviews Cement And Clinker

Upgraded Blacksmith’s Welded Coal Forge Firepot – 10 X 12 Inch 2600F Rated Blacksmithing Firepot for Forging Blacksmith Farrier, Knife and Tool Making

  • ...lso for heating and bending of metals, tempering and heat treatment of small knives & agricultural tools. Fabricated Firepot is a great pick for the DIY blacksmith, beginners, hobbyist or farrier, easy to use..
  • 【UPGARDE DESIGN 】– Designed with one-piece in the ash dump / air pipe system, the firepot use with a clinker breaker, weighted ash dump, and air-inlet pipe. ①The air-inlet pipe allows air to come into the firepot from your blower, let the coal of bottom full burn to provide enough heat. ②The clinker breaker pivots on a 1/2 inch rod, used to remove wast ash dump. ③The welghted ash dump can auto open-close when removing wast ash dump..
  • 【SUPERIOR MATERIAL】– All thick metal, made entirely from heavy duty 1/2-inch thick and plasma cut plate steel with solid and sturdy. And is welded inside and out, all welds have good penetration and are solid. Quality and function exceed the cast iron firepot, it is best replacement to your cast iron firepot. When fabricated firepot is exposed to temperature changes, it does not create any cracking like cast iron, but still great keeps the heat..
  • 【FURNACE SPECIFICATION】– Blacksmith’s Welded Coal Forge Total Weight: 35 LBs. Inside Dimensions: 10” x 12” x 5”. Fits in rectangular hole: Mi....
Check Stock

Simond Store Blacksmithing Welded Firepot Coal Forge 10 x12 Inch Blacksmith Forging Tools Knife Making Professionals Artists Hobbyists Farrier Forging

  • Material: This handmade blacksmith coal firepot is made from a 1/2-inch thick piece of plasma cut steel plate which is sturdy. and is robustly welded both inside and out, with strong penetration overall..
  • Clinker Breaker:The Clinker Breaker on a 1/2 inch rod has a turn-down end that serves as a handle and is rotatable.
  • it is used to simply remove waste ash dump and let the air to blow in the firepot. It fits perfectly into to the ash dump’s slot..
  • Dimension:The inside dimensions approximately 10 “x 12″ x 5″. built entirely from steel that has plasma cut and is both inside and outside welded fits a rectangular hole. Minimum 10.5″ x 12.25″ & maximum 11.75″ x 13.75”..
  • Wide Application: One of the most essential components of equipment in a blacksmith’s workshop is the welded coal firepot. Ideal for metalworking operations such as forging tongs, punches, and hammers. using a hand-crank blower..
  • Auto adjustable Ash dump:This firepot design is featured an auto-adjustable ash dump at the bottom. The weighted ash dump has an auto open-close feature. You don’t need to manually open the weighted ash dump when waste ash dump produces, it opens automatically and also automatically closes..
Check Stock

FABER Deep Floor Degreaser Heavy Duty Alkaline Based Floor Cleaner Degreaser- Commercial Grease Remover For Safe Cleaning On Synthetic & Natural Flooring, Porcelain, Stone, Quartz, Ceramic, Epoxy

  • A FOOLPROOF CLEANING SOLUTION FOR ALL SURFACES: Harsh with pesky greasiness but gentle with your floors, the Faber concrete grease remover works wonders on all different floor types including: slate, sandstone, basaltina-lava stone, cement tile, concrete, ceramic, clinker, Cotto, grout joints, granite, porcelain, limestone, marble, brick, quartz, sanitary fixtures, quartzite, terracotta, travertine and tuff stone!.
  • SUITABLE FOR INDOORS & OUTDOORS – EVEN ON THE GREASIEST SITES: Our floor degreaser concentrate with its innovative extractive action gently melts and removes even the most stubborn dirt caught by the micro-porosity of your floors. An excellent solution to deep clean any floor from persistent grease stains caused by foot or vehicle traffic, including cars, forklifts, trucks and even bikes..
  • 100% EFFECTIVE FOR COMMERCIAL OR HOME USE: Easy to use for your home or garage with a regular mop or a white pad, just a quick swipe is enough to make your grimy floors shine. Suitable for commercial and professional use, our industrial-grade degreaser can also be used with any single-disc machine for heavy-duty ....
Check Stock

US Stove 6041I Pellet or Corn Insert with Igniter Furnace

  • Designed to help burn nonpremium fuel and high clinker fuels.
  • Sure Feed Auger System improves performance and safety.
  • Digital Control Board make testing, startup, and operation a breeze with just a touch of a button.
Check Stock

Bituminous Coal 50lbs

  • Inside Dimensions : 10” x 12” x 5”.
  • Fits in rectangular hole size Minimum 10.5” x 12.25” – Maximum 11.75” x 13.75”.
  • Clinker Breaker: ½-inch thick plate and round handle..
  • Application : Forging hammers, punches, tongs and other metal working operations..
Check Stock

Pellethead Replacement Englander Multi-Fuel Stove Agitator Bar, Fuel Stirrer CPM-FS

  • Fits Englander Models: 10-CPM - 49-SHCPM - 49-SHCPML - 49-TRCPM.
  • Fuel Stirrer/Agitator Bar Stirs the Fuel in the Burnpot Helping to Reduce Burnpot Buildup and Clinker Formations..
Check Stock

SIMOND STORE Blacksmith's Welded Coal Forge 10 X 12 Inch, 2600F Rated, Welded Blacksmithing Firepot for Forging Blacksmith Tools Knife Making Farrier

  • Inside Dimensions : 10” x 12” x 5”.
  • Fits in rectangular hole size Minimum 10.5” x 12.25” - Maximum 11.75” x 13.75”.
  • Clinker Breaker: ½-inch thick plate and round handle..
  • Application : Forging hammers, punches, tongs and other metal working operations..
Check Stock

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
  • 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....
Check Stock

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).
Check Stock

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
  • Make sure to mix the paint and cement dry powder first, then add water and stir!.
Check Stock