Reviews Ceiling Mount Projectors

ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop

  • Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling.
  • fits Epson, Optoma, Benq, Viewsonic and most other projectors.
  • Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch.
  • projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
  • Includes an AMERICAN WRITTEN installation manual with illustrations and photos.
  • Includes scissor clamp and one 8 inch aluminum suspension rod, and screws.
  • maximum spider mount leg span is 12 inches, mount hole to mount hole.
  • it is shown for demonstration purposes only.
Check Stock

Projector Ceiling Mount Long Extendable Height 23-46.5in / 60-120 cm Universal Thread 360° Adjustable Video High Profile Projector Wall Mount Bracket Hanger for Camera Projector CCTV DVR Silver

  • Height Extendable Projector Mount: Long projector mount pole with longer extendable length from 23.6-47.2 in / 60-120 cm. High profile for high ceiling..
  • Adjustable Projector Mount: The Ceiling projector mount with a 360° horizontal rotation and 90° vertical tilt pivot ball to set various projection angles..
  • Universal Projectors Mount: 3 types of screw thread fit almost all projectors with one mounting screw or tripod screw hole..
  • Quality Projector Mount: High ceiling projector mount with thickened tube, bigger cable management, and larger base with a 6.6lbs/3kg loading capacity. Premium Aluminium Alloy, Quality Stainless Coating..
  • Multifunctional Projector Holder: The projector mounts can be used as wall hanging, ceiling mounting and desk / floor standing mount with bonus accessories. As great long camera mount too..
  • Excellent 1-Year-replacement / refund. Please tell us first if you get any problem with our projector mount..
Check Stock

Universal Mini Projector Mount 2-Be-Best Mini Projector Ceiling Mounts 7 in / 18 cm 360 Rotation Mini Projectors Wall Mount Holder with Thread Adapters for Projector CCTV DVR Camera

  • UNIVERSAL Projector MOUNT fits most mini projectors with 3 threads 0.15/0.23/1/4 in (3.9/5.9/6.35 mm) with 2 sizes screw adapters with a length of 180 mm / 7 in. Compatible for DR. J, Qkk vankyo Topvision Projectors etc. Also for Video LCD/DLP Projectors for Home, Media Room, Office or Classroom..
  • ADJUSTABLE Projector Mount with a Pivot Ball Head that allows 360 Rotation and 180 tilt with a knob to fix a suitable angle easily and quickly. Great as Projectors CCTV DVR DV Camera DSLR LED Light Desk Stand that need flexible adjustment..
  • Mini Projector Mount is made of with Nice Aluminium Alloy for mini devices with Larger Base and Thickened Tube with a real max loading capacity 11 lb/5 kg.(pls tighten all parts, screw in solid spot, use toggle bolts for drywall).
  • Wall and Ceiling Projector Mount is easy to be Hooked up with accessories, like, screws and screw hole fillings. Cable Zip Ties provided to help cable management (or let cable go through cable hole).
  • MULTI-FUNCTIONAL PROJECTOR MOUNT is a 3-in-1 projector mount as ceiling mount, wall hanging mount, or desktop stand. Pls tell us know any problem. Were always here for our dear customers..
Check Stock

Projector Mount Wall or Ceiling Bracket with Adjustable Height and Extendable Arms Projection Mount for Different Size Projector (Silver)

  • UNIVERSAL IN THE TRUE SENSE: The updated universal projector mount passed the improvement, on the basis that it is suitable for 95% of the projectors on the market, we have developed a mount that can support four holes as well as single hole projectors. You can easily switch between four holes and single holes by removing the port parts..
  • MATERIAL & ITEM PACKAGE: Mini projector wall mount the package contains a mount stretch rod with adjustable length, four-hole mounting accessories, and single-hole mounting accessories,31 screws, contain the User's Guide. The projector wall mount was made of high hardness carbon steel, MAXIMUM WEIGHT it's 44 lbs..
  • ADJUSTABLE ANGLE AND MOUNTING MODE : It can rotate about 15 degrees, roll ±8 degrees, rotate 360 degrees, provide various views, suitable for installation in various ceilings and walls. 4 installation methods: 1. Installation of the embedded ceiling.
  • 3. Wall-mounted installation；4. Single rod installation..
  • SURPRISING FEATURES:wall-mounted projector mount Suitable for most four-hole installation or single-hole installation projectors on the market, and surely make your projector have one more clear suspension.And cable management to Audio, video cables, and HDMI..
Check Stock

Tuimen Projector Mount, Projector Mount Drop Ceiling Extandable Length 11.8' - 18.89', Universal Projector Mount with Adjustable Projection Angle for DLP Projectors

  • Universal Ceiling Mount - Fits most of different DLP projectors, you can install the projectors on the ceiling or on the wall when you confirm the screw hole on the the back is 1/4 inch..
  • Tested 11 Lbs Load Support - The mount factory has done a lots of load-support tests to confirm that the projector mount can hold a maximum load of 11 Lbs when properly installed..
  • Fully Adjustable Angle - Supported to 35-degree tilt, 90-degree swivel, and 360-degree rotation. Hits all the right viewing angles so you can get a comfortable projection angle..
  • Different From 9.99 USD - Different from the product with less than 0.1 lb low plastic mount, the ceiling mount made of high quality aluminum allow, support length adjustment, and a snap-fit design..
  • Five Minutes Installation - The package contains some assembled parts and a user manual. You can refer to the installation video and download a assembly manual on the product website..
Check Stock

Movable Projector Stand with 38mm Ball Head tilt Adjustable, Portable Desktop Projector Mount for 3.5 mm inport Projectors Home Office and Outdoor Blanou

  • Universal Camera Mount - The tray has a usable size of 35cm*22cm and fits most video conferencing cameras, projectors and routers on the market..
  • Height Adjustable - The projector mount can be mounted on the wall or ceiling. The extendable height of the projector can be adjusted to the ceiling for 34cm to 56cm..
  • Premium Materials - This projector stand is made of high quality Carbon steel to support projectors up to 22 lbs..
  • Unique DRSN Design - White surface finish blends beautifully with most home and office environments with its simplicity. The bottom of the tray is hollowed out to ensure timely heat dissipation. In-tube wiring for comfort and cleanliness.
  • Easy to Install - After assembling the mount, simply screw the mount to the ceiling and place the projector or camera on the tray..
Check Stock

Universal Ceiling Mount with Tray for Projector/Camera, No Hole Installation, Height Adjustable 11.4-22inches, in-Tube Cable Routing, White Aluminum Alloy Boom and Silver Tray, Wall/Ceiling Mounting

  • Universal Camera Mount - The tray has a usable size of 10.2" * 7.9" and fits most video conferencing cameras, projectors and routers on the market..
  • Height Adjustable - The projector mount can be mounted on the wall or ceiling. The extendable height of the projector can be adjusted to the ceiling for 13.4 to 22 inches..
  • Premium Materials -The extendable poles are made of high quality aluminum, the trays and Ceiling sections and are made of carbon steel to support projectors up to 22 lbs..
  • Unique DRSN Design - White and silver surface finish blends beautifully with most home and office environments with its simplicity. The bottom of the tray is hollowed out to ensure timely heat dissipation. In-tube wiring for comfort and cleanliness.
  • Easy to Install - After assembling the mount, simply screw the mount to the ceiling and place the projector or camera on the tray..
Check Stock

VideoSecu LCD DLP Tilt Swivel Sloped Projector Ceiling Mount Bracket Fit Flat and Vaulted Ceiling PJ1B WU7

  • VideoSecu projector mount for flat ceiling and vaulted ceiling.
  • The projector mount can tilt +/-20 degree, pan 45 degree, Swivel 90 degree and roll +/-15 degree.
  • The Adjustment arm (16 inch Max arm distance) fit most projectors.
  • Standard hardware required to fasten the mount to your ceiling and your projector included.
Check Stock

VIVO Universal Adjustable Ceiling Projector Mount for Regular and Mini Projectors, Projection Mount with Extending Arms, White, MOUNT-VP01W

  • Universal Projector Mount - Fits the majority of projectors on the market, including mini projectors (Please Note: Extension arms need to be removed for mini projectors). The distance between mounting holes on the back of the projector must be 12.5” or less..
  • Strong 30 Lbs Support - Made entirely of high-grade steel, this mount holds projectors weighing up to 30 lbs, keeping your expensive equipment safe and secure..
  • Fully Adjustable - Features +15° to -15° tilt, +15° to -15° swivel, and 360° rotation. Hits all the right viewing angles so you and your guests can watch in comfort..
  • Low Profile - This mounting system holds your projector just 6” from the ceiling surface. The white powder-coated finish blends well with the majority of home and office environments..
  • Easy Installation - Quick release hooks attach and detach by tightening and loosening the mounting bolts. All hardware and instructions are provided for assembly..
Check Stock

suptek Black Projector Ceiling Mount Bracket Fits Flat or Sloped Ceiling Height Adjustable with Extendable Length for LCD/DLP Projectors PR05B

  • 3-In-1 Projector Wall Mount Bracket - ceiling installation, sloped ceiling installation, and wall installation.
  • Compatible with projectors whose mounting holes are under 11.41" and weight under 30lbs (13.6kg).
  • Resistant to rust - ceiling part and projector mounting part are made of cold rolled steel, extendable pole is made of aluminium alloy.
  • Adjustable - tilt 90°up/down, pan/swivel 360°, height from 1.96"-21.25",suitable for different circumstance.
  • Package - 1×ceiling mount, 1×standard installation kit, 1×user manual.
Check Stock