Reviews Caulk For Composite Baseboards

Titan 17005 2-Piece Stainless Steel Pry Bar Scraper Set

  • Set contents: (1) 7-1/4-Inch and (1) 9-1/4-Inch Stainless Steel Pry Bar Scraper.
  • Features a nail puller, razor sharp scraper edge, and an angled edge for pulling and prying.
  • Angled edge is ideal for pulling apart walls, prying off moldings, tiles, wood slats, and removing baseboards and trims.
  • angled end is designed with a chiseled edge so it can wedge into tight spaces.
  • Razor-sharp scraper edge is perfect for removing caulk, adhesives, paint and residue from glass, metal, and hard surfaces.
  • Constructed with high quality stainless steel that will prevent corrosion and rusting, sturdy stem won’t bend or crack during use.
Check Stock

Goof Off FG658 Professional Strength Remover, Aerosol 12-Ounce

  • GOOF OFF Professional Strength Remover works the first time to remove dried latex paint, adhesive, asphalt and tar faster and better than other removers.
  • Effectively removes the toughest stuff ordinary removers can’t. Clear away stuck-on messes with this professional strength adhesive remover.
  • Use Goof Off to eliminate messes and costly mistakes from a wide variety of surfaces including baseboards, metal, glass, brick, wood, concrete, grout, fiberglass, hand tools and most car, truck, boat, or RV surfaces.
  • For use as a glue remover and to remove stickers, decals, caulk, dried latex, paint, tar, road grime, and even bugs and tree sap.
  • Directions: Apply to a cloth and simply blot or rub lightly.
Check Stock

Goof Off FG659AM Heavy Duty 32oz 2 Count Remover Yellow

  • PROFESSIONAL STRENGTH REMOVER: GOOF OFF Professional Strength Remover works the first time to remove dried latex paint, adhesive, asphalt and tar....
  • EFFECTIVELY REMOVES TOUGH STAINS that ordinary removers can’t. Clear away stuck-on messes with this professional strength adhesive remover..
  • SAFE ON MULTIPLE SURFACES: Use Goof Off to eliminate messes and costly mistakes from a wide variety of surfaces including baseboards, metal, glass,....
  • FOR USE as a glue remover and to remove stickers, decals, caulk, dried latex paint, tar, road grime, and even bugs and tree sap..
  • EASY TO USE: Apply to a cloth and simply blot or rub lightly..
Check Stock

Dripless Inc. ETS2000 Ergo Composite Caulk Gun

  • Lightweight composite frame caulking gun for 10 oz. cartridges.
  • Thrust ratio of 12:1 for use with latex, acrylic, and silicone.
  • Revolving frame allows cartridge to rotate for maintaining bead orientation when caulking around corners.
  • Spout cutter built into side for opening cartridges without a knife.
  • Hook on the back for hanging it on a ladder.
  • Contractor heavy duty ergo composite caulk gun provides superior performance.
  • Engineered ergonomic grip to keep the wrist in a natural and balanced position.
  • Rugged composite construction weighs up to 40-Percent less than other models.
  • Extra long clean-out rod that snaps in place when not in use.
  • Recommended for acrylics, silicones, elastomeric or latex.
Check Stock

Goof Off FG653 Professional Strength Remover, Pourable 16-Ounce,Liquid

  • GOOF OFF Professional Strength Remover works the first time to remove dried latex paint, adhesive, asphalt and tar faster and better than other removers..
  • Effectively removes the toughest stuff ordinary removers can’t. Clear away stuck-on messes with this professional strength adhesive remover..
  • Use Goof Off to eliminate messes and costly mistakes from a wide variety of surfaces including baseboards, metal, glass, brick, wood, concrete, grout, fiberglass, hand tools and most car, truck, boat, or RV surfaces..
  • For use as a glue remover and to remove stickers, decals, caulk, dried latex, paint, tar, road grime, and even bugs and tree sap..
  • Directions: Apply to a cloth and simply blot or rub lightly..
Check Stock

SNAWOP Dental Impression Mixing Dispenser 50ML Impression Material Dispensing Gun 1:1/1:2 Cartridges

  • Match up with most of the charging barrel.
Check Stock

WM Barr Goof Off FG661 Professional Strength Remover, 6 oz

  • PROFESSIONAL STRENGTH REMOVER: GOOF OFF Professional Strength Remover works the first time to remove dried latex paint, adhesive, asphalt and tar faster and better than other removers..
  • EFFECTIVELY REMOVES TOUGH STAINS that ordinary removers can’t. Clear away stuck-on messes with this professional strength adhesive remover..
  • SAFE ON MULTIPLE SURFACES: Use Goof Off to eliminate messes and costly mistakes from a wide variety of surfaces including baseboards, metal, glass, brick, wood, concrete, grout, fiberglass, hand tools and most car, truck, boat, or RV surfaces..
  • FOR USE as a glue remover and to remove stickers, decals, caulk, dried latex paint, tar, road grime, and even bugs and tree sap..
  • EASY TO USE: Apply to a cloth and simply blot or rub lightly..
Check Stock

Gresdent Trim Puller Heavy Duty Pry Bar Home Trim Tile Removal Tool Remodeling Wood Floor Baseboard Molding Nail Pulling and Hex Wrench Tool (Red)

  • 【Ideal for Removing】The trim puller is specifically designed for safe removal of tiles, baseboards, hardwood floors, window trim,molding, door casings, trim panels, and even nailed or glued countertops, without using shims or board spacers..
  • 【Easy To Use】First remove or separate the caulk that seals the top of the baseboard by cutting it with a sharp knife, then insert the puller above the baseboard and tap it with a hammer or mallet.
  • it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall..
  • 【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury..
  • 【Time & Effort Saving】The larger, flatter contact surface on the puller spreads out the force for more efficient removal, making it possible to do more work with less effort. The 16-degree wedge center facilitates removal of trim and baseboards and preven damage to both trim and walls.p.
Check Stock

Finish Line Acrylic Urethane Elastomeric Sealant Pre-Filled Precision Caulk Gun One Ounce Tube Single (White, FLCPREFILL, 1, 00215)

  • Perfect for hard to reach areas, hobbies, crafting, crown moulding, baseboards, windows, gutters, counters, cement, metal siding, roofs, small gaps and cracks, RV's, nail holes and quick repairs.
  • Weather tight, indoor / outdoor sealant, water resistant, paintable in 4 hours, soap and water clean up, no mixing required.
  • Bonds to most substrates, Class 25, exceeds ASTM C-920, 800% elongation, not recommended for marine or underwater use.
  • Portable, convenient, precise, great for small jobs, easy to use, includes 2 adjustable 1/32-3/16" tips.
  • High performance, premium technology, exceptional protection, compatible with the Finish Line Caulk Tool refill kit.
Check Stock

DAP Extreme Stretch Kit - 10.1 oz White Premium Crackproof Elastomeric Sealant. Stretches Over 600%, Seals Gaps up to 3\ Wide. Includes 12 Extreme Stretch Tubes and Applicator Gun

  • ALL-PURPOSE SEALANT! Looking for a high-quality sealant that won't let you down? Look no further than DAP Extreme Stretch! This waterproof and weatherproof sealant stretches over 600% and seals joints up to 3" wide. This low odor urethane acrylic sealant can be used for indoor and outdoor projects..
  • WIDE RANGE OF USES! DAP Extreme Stretch is ideal for windows, doors, cornices, chair rails, baseboards, trim, siding, vents, soffits, eaves, countertops, and sinks. Paint can be applied over it after at least two hours of drying..
  • AWESOME VALUE KIT! Our AWF PRO DAP Extreme Stretch Kit comes with everything you will need. The kit includes: White Extreme Stretch 10.1oz Tubes (12) and AWF PRO Heavy Duty Caulk Gun (1)..
  • SIMPLE TO USE! 1. Surface preparation. It is imperative that the project surface is clean, dry and clear of old sealant. Extreme Stretch will not adhere to old sealant. 2. Cut the nozzle at a 45° angle to desired bead size. 3. Load into caulk gun. 4. Fill gap with sealant, pushing the bead forward. 5. Tool within 15 minutes. FOR EXTRA WIDE GAPS: Ensure to use backer rod on any joint sizes that are deeper or wider than ½”..
  • EASY CLEAN UP! Clean up with a damp cloth or sponge before it skins over. Cured sealant must be cut or scraped away..
Check Stock