Reviews Cast Iron Housing Motor

Star SJ10 1 HP Cast Iron Convertible Jet Pump for Deep or Shallow Wells, Includes Injector Kit, Dual Voltage

Includes Injector and long venturi for deep well applications and short venturi for shallow well applications.
1 HP cast iron convertible jet pump features dual voltage 115/230 motor with easy-change voltage switch.
Trouble-free, long life TEFC motor features quick and reliable priming.
Rugged cast iron jet pump and motor housing for long life.
For single pipe wells (0-25 ft) or two pipe wells (26-40 ft) and has 1 Inch NPT discharge and 1-1/4 Inch inlet.

LARGE DISCHARGE CAPACITY: This model is designed with a maximum discharge head of 52-Feet and can pump up to 138 GPM.
DESIGNED TO PUMP RAW SEWAGE: Our 2SEV1022L model is a submersible pump that is specifically designed to handle 2-inch spherical solids and is ideal for typical raw sewage applications.
HANDLES SPHERICAL SOLIDS WITHOUT CLOGGING: Each pump is designed with a cast iron vortex impeller to allow for easy and effortless passage of 2-inch spherical solids without clogging or backing up.
HEAVY DUTY SPLIT CAPACITOR MOTOR: Every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw.
INDUSTRIAL GRADE: Great for commercial applications, the robust design or this pump features a corrosion resistant stainless steel shaft and hardware, heavy duty cast iron motor housing, and oil lubricated ball bearings.

3/4 hp shallow well jet pump with trouble-free, long-life TEFC motor.
Features quick, reliable priming and 115/230 dual voltage motor with easy change voltage switch.
Rugged cast iron pump and motor housing for long life.
Well pump includes pump with built-in shallow well ejector, motor and pressure switch.

...r Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM of Water @ 20 Ft. of Head: 50 Shaft Seal Material – Pumps: Silicon Carbide, Viton Agency Compliance: CSA C/US Duty: Continuous Voltage – Pumps: 208/230VAC Discharge NPT: 1-1/4″ F Max. Diameter Solids: 2 in Duty Cycle: Intermittent.
Switch Actuation: Tether Float Flow Rate @ 40 Ft. of Head: 48.0 gpm Rated Voltage: 208/230VAC Discharge Gender: Female Flow Rate @ 60 Ft. of Head: 42.0 gpm Discharge: 1-1/4″ FNPT Body Material: Cast Iron Flow Rate @ 15 Ft. of Head: 50.0 gpm Flow Rate @ 20 Ft. of Head: 50.0 g....

Item may ship in more than one box and may arrive separately.
Main motor: 2HP, 220V, single-phase, TEFC, 3450 RPM, Power feed motor: 1/4 HP, 180VDC, 1.5A, Feed speed: 0 - 18 FPM.
Precision-ground cast iron infeed and outfeed extension wings.
Dovetailed way for cutterhead housing with precision gib adjustments.
Variable speed power feed with chain drive power transfer.

APPLICATIONS: This automatic, heavy duty, cast iron sump pump with tethered switch is ideal for use in residential sump systems or emergency water removal applications.
AUTOMATIC PUMP: activates when water reaches 12 to 14 inches, shuts off when water drops to 4 to 6 inches.
piggy-back design allows switch to be overridden for emergency water removal or testing.
BUILT TO LAST: rugged cast iron volute, housing, motor cover and non-clog type impeller is capable of passing 3/8-inch diameter semi-solids.
also features a carbon/ceramic shaft seal.
ENERGY-EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor, 115 Volts, 5.3 Amps, 507 Watts, 60 Hz., thermally protected.
PUMP SPECIFICATIONS: 1.5-inch FNPT discharge, 10-ft. power cord, 4300 GPM at 0-ft. lift.
5.5 inches x 8.0 inches x 10.5 inches high.

HIGH EFFICIENCY: This sander meets CSA standards, with heavy-duty construction can extend using life, equipped with an induction motor that supplies the needed power running under load, the motor is 1/3HP, 3.5 Amp, the no load wheel speed is 3450 RPM and belt speed 4480 FPM.
MULTI-FUNCTION SANDER: This combo 2"x42" belt sander 6" bench grinder includes a 2-Inch x 42-Inch high-quality metal sanding belt that can be used for general purpose sanding and finishing on most metals, wood, plastics, and other materials.
MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for sanding to meet your project, the belt housing can swivel from horizontal to vertical for sanding long workpieces.
EASY TO USE: Equipped with a 6-Inch 60 grit white grinding wheel with tool-free adjustable eyeshield and Led light, the quick-release tension and tracking mechanism make belt changes quick and easy.
TWO WORKTABLE: Equipped with two workbenches for more convenient sanding, the cast iron belt sander work table can give better support when sharpening with metal,and the cast AL big work table can work well with wood material, the sturdy cast iron base with rubber foot prevents vibrations.

Powerful 5/8 HP induction motor of the bench grinder is made for heavy-duty grinding operations.
Industrial cast iron base and motor housing of the 6-inch bench grinder provide durability and prolong life.
Table grinder motor runs at 3,450 rpm for high-speed material removal.
Precision-machined aluminum tool rests allow the user to accurately position work.
Rear exhaust ports in wheel guards for smoother operation.