Reviews Case Screws

ULTECHNOVO PC Case Fan Screw- Screw for Case Fan Including 30 Long Screws 30 Short Screws- Reusable Lightweight Screw Flat Head for Case Fan

  • Screw for case fan is made of premium material for durable and practical use..
  • Premium case fan screw is designed for professional use..
  • Case fan screw includes 30pcs long screws and 30pcs short screws..
  • The long screws are the position screws..
  • The short screws are flat- head self- tapping universal screws for the chassis fan..
Check Stock

JOREST Watch Battery Replacement Kit, Watch Repair Screwdriver, Watch Band Replacement tool, Watch Wrench Back Remover, Watch Case Opener, Watch Back Remover Holder, Spring bar, Tweezers

  • ...pring bar (4* 16/18/20/22/24mm) and cleaning cloth..
  • 【Suitable for different watch covers】-- Watch back case opener is used for watch cases with grooves；watch case opening pry is used for the watch case with a pry opening；Screwdriver is used for watch case fixed by screws；tweezer is used to remove the battery.The use range of the watch back case opener is 15-60mm, and the drill bit spacing is set by rolling the adjusting wheel to fit the groove of your watch back..
  • 【Five-in-one watch screwdriver】-- Five types of screwdriver bits are suitable for many situations: watch battery fixing screws, watch case screws, watchband screws, and can also be used for glasses screws. The cover at the end of the screwdriver can be opened, and the inside is hollow for storing other screwdriver bits..
  • 【The purpose of the watch case holder】-- The watch case holder can be used with other tools in the kit to help fix the watch and reduce the risk of sliding and scratching the watch. It is suitable for watches of various sizes, and can be used for watches with a diameter of up to 50mm..
Check Stock

Willhom Bottom Case Screws (Pentalobe x10) Replacement for MacBook Air 11" A1370 A1465 13" A1369, A1466 (2010-2017)

  • Bottom Case Screws (Pentalobe x10) Replacement for MacBook Air 11 inch A1370 , A1465 13 inch A1369, A1466 (2010 - 2017).
  • P5 pentalobe bottom case screws attach bottom case to top case..
  • We might have a few screws loose, but your laptop doesn't need to..
Check Stock

140mm Case Fan Quiet High Performance PC Fan 140mm Standard Case Fan 3pin 4pin Molex Connector 12V DC Computer PC CPU Case Fan 1000RPM 2-Pack

  • ❤ STANDARD CASE FAN:140x140x25mm 140mm fan quiet silent 12v dc 0.38A cooling fan for the replacement of standard computer case fan ,gaming PC fan ,CPU cooler fan or other electronics equipment heat sink radiator.the fan's speed can be adjusted by using a different voltage (5-12V), it can work at a lower voltage to achieve a silent effect..
  • ❤ 3-PIN CONNECTOR: 140mm 3 Pin connector fan for easy installation.4pin motherboard power port to suitable for more than 2 kinds of 140mm fan using..
  • ❤ ANTI-VIBRATION SCREWS: Besides 4pcs normal screws there has extra 4pcs anti-vibration silicon screws packed together to reduce noise between fan and PC case..
  • ❤ PACKAGE INCLUDED:140mm long life sleeve bearing case fan x 2 ,Silicone screws x 8, fan screws x 8..
  • ❤ 100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose..
Check Stock

BOLT DROPPER 400pcs Laptop Screws w/Blue Nylok (20 Sizes) Titanium Nitride Screw Driver, Notebook Computer Screw Kit Set, Electronic Repair Screws for Hard Drive SSD Motherboard Fan Power Graphics

  • {Blue Nylok Prevents Loose Screws} You’re probably buying this kit because you lost a screw, but this will be the last screw kit you’ll need to buy! Bolt Dropper laptop screws are coated in Blue Nylok which stops screws from coming loose. Never worry about a hard drive or laptop case coming loose again! The coating on the screw prevents it from loosening while still allowing you to remove the screw if needed..
  • {Titanium Nitride Tip Screwdriver} Not only did we include a screwdriver, we included the best screwdriver! Stop stripping screws or searching for the right fit driver with our Titanium nitride (TiN) tipped screwdriver. This super hard ceramic tip is meant to not only precisely fit but reduce stripping of heads. The TiN tip is meant to last and won’t wear down, you may use all the screws in this kit but the screwdriver will last forever..
  • {High Quality Plastic Case Keeps You Organized} Labeled and snaps closed, what more could you want with a case? Seems simple, but we went the extra length to bring you a quality case so many others lack. We know what a pain it is to have components mix and sit there sorting them out. Our case is neatly labeled and prevents compartments from mixing, know what you have and where. Keep your laptop s....
Check Stock

Zmbroll PC Computer Case Cooling Fan Screws Cross Recessed Head Self Tapping Screw M5x10 Black and Silver Case Fan Mount Screws Long Short Screws Kit

  • Perfect for PC case, power supply, motherboard, hard drives, fan and floppy/CD-ROM/DVD-ROM drives fixed installation.
  • Computer case fan screws size:5*10KB/M5*10mm, fit for most computer case fan,the long Water cooling screw :6-32*30 ,3cm long.
  • Made of high- quality metal,packaged in a handy box,good choice for a DIY personal computer building.
  • Package includes 50pcs silver and 50 pcs black computer case Phillips Flat Head Screws and 40pcs black long flat head computer cooling fan screws.
  • Self-tapping thread design for quick and easy installation of most standard plastic-framed case fans.
Check Stock

HiFiBerry HighPi Raspberry Pi Case - Raspberry Pi4

  • ... Pi covered. Generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. Supports PI POE Hat, HiFiBerry Hats, Serial Hat, UPS HAT and more!.
  • The HighPi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case (Screws not included). When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables..
  • High quality ABS plastic case, designed and made in Canada, Large internal volume for HATs, break-out boards, or heat sinks, Vents on three sides double as fly-through cable ports, Self-adhesive rubber feet included, set of 4, Matte finish hides fingerprints.
  • External dimensions: 97 x 66 x 41mm, Internal volume for breakout boards: 90 x 60 x 28.8mm.
Check Stock

Diamond 60% CNC Anodized Aluminium case Acrylic Case for 60% 64 Mechanical Keyboard for GH60 Bluetooth Gk61 GK64 DZ60 YD60MQ

  • Package Included:Purple CNC Case + Screws + Brass Bolt + Rubber Feet.
  • Both GK61 GK64 wired and Bluetooth edition is compatible with this case Plate.
  • For GK61 GK64 original plastic keyboard,if you want to replace with this case,please order case plate kit together,original plate is bigger than normal size CNC case.
  • For GK61 GK64 PCB,pls use brass bolt and M2-6 screws,For Normal GH60 PCB,just use M2-5 screwed to the case directly.
Check Stock

Inateck Mounting Bracket for 2 x SSD/HDD, Compatible with Regular PC and Mac Pro 2019, with SATA Cable and Installation Tool

  • Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
  • Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
  • Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
  • Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
  • Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..
Check Stock

13 Pro Case, Military Grade Heavy Duty Protector Armor Case for iPhone 13 Pro Metal Bumper Built-in Silicone Shockproof iPhone 13 Pro Cover 6.1\ Black+Red

  • [Only for iPhone 13 Pro Shockproof Case:] Military grade super protection performance phone case for iPhone 13 Pro(6.1 inch), Make sure your mobile phone model please.
  • [Heavy Duty Armor Phone Case:] Design with double side metal and impact-resistant silicone surround. 20 ft Drop Protection (6 meters), approved military grade drop test by SGS. full-body protection for your iPhone 13 Pro.
  • [ 'The Fast and Furious' Designed & Advantage ] Precise cutout and design ensures easy access to all ports, sensors, speakers, cameras and all cell phone features without having to remove case. use screws to fix, more solid. easy-to-grip and anti-slip design that seamlessly fit for your mobile phone.
  • [Package Include: ] iPhone 13 Pro Max case made of metal bumper +dual layer silicone, Screen Protector *1, Screw Driver *1, replacement screws * 6, Wrist Band *1, Lanyard *1, screwdriver, manual.
  • [Military Upgrade Protection:] Tough armor sports car shape design, the phone will be totally sealed in a rugged metal box fixed with screws. With lanyard and hand strap accessories, you can hang the phone on your body at any time.
Check Stock