Reviews Case Fan Controller

RGB Fans 120mm 3 Pack Gaming PC Fans High Performance PC Cooling Fan Low Noise with Controller Computer Case Fan

  • Highly Efficient Ventilation : The computer fans destinctive design on the back end of the fan blades providing highly efficient ventilation, rgb pc fans 5 pin connector fan allows for dynamic speed adjustment Max 1300 rpm..
  • High performance 120mm fan rgb pressure-optimised blade design with outstanding quietness of operation, computer case fans excellent balance of performance and quietness, pc case fans supports automatic motherboard speed control..
  • 120mm case fan colorful addressable led light design, unlimited color transformation, computer fan 120mm with good cooling capacity..
  • RGB cpu fan Heatsink Attributes: PC fan 120mm quiet Air Flow Rate: 50.5 CFM. Operating Voltage: 7V - 13.2V. Speed: 600 - 1300 RPM, rgb case fans delivering the superior airflow..
  • 120mm rgb fan Include: Case fans 120mm 3 pack + 2 LED strips + pc fan controller. Trusted Premium Brand ALSEYE Service: If you encounter any problems during use cooling fan pc, our friendly and reliable customer service will respond to you within 24 hours!.
Check Stock

Pccooler 120mm Fan Moonlight Series 5 in 1 Kit Upgrade,PC-5M120 ARGB LED Computer Case Fan - PWM Cooling Fan - Dual Light Loop Quiet Fan/Multiple Light Modes with Wireless Controller for PC Case

  • ...ct the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one..
  • 【Dual Light Loop Design – Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller – 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote..
  • 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case..
  • 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs. Wireless RGB controller, more advanced wireless....
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • ...he performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't include GPU and PSU. You need to install the windows yourself. The panel of case may be scratched during the production process. If you have any questions, please feel free to contact us..
Check Stock

Arctic F9 PWM PST - Value Pack (5pc) - Standard Low Noise PWM Controlled Case Fan with PST Feature

  • Innovative DESIGN enables quiet and efficient ventilation: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. Air flow – 43 CFM. Noise level – 0.3 sone.
  • Perfect case fan regulation with PWM: the PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
  • Pwm Sharing Technology (PST) lowers noise: The PST assures That all of your fans listen to one control signal. E.G. You share the CPU cooler’s PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.
  • Long service life: The fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
  • Fan controller Made in Germany: The Arctic F8 PWM PST fan is well known for high airflow at a comfortable noise level. The real improvement is the motor and controller. Our German engineers made this fan work at lower speed When performance is not needed.
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • ...E 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions..
Check Stock

aigo AR12 3-Pack 120mm RGB Case Fan ARGB Addressable Motherboard SYNC Cooling SATA Interface PC Fans with Controller for Computer Case

  • 【5V ARGB Addressable RGB】If your motherboard has RGB function,our fans could synchronize the lights of the motherboard completely!Make you enjoy the high consistency of lighting..
  • 【The Fan Blade Design】The fan blade design can lower the noise effective and bring more airflow..
  • 【Anti Shock Design】the anti shock design on both sides of the AR series PC case fans,reduce resonance and bring more silence,and be more quiet..
  • 【Comfortable Lighting Effect】The TPU light guidance ring is a perfect match with the frame of the fans,the fan is also creative in design and qualified in material..
  • 【Power Connector】The AR12 fans connect with micro 6 pin,and requires an aigo micro 6 pin controller to run.AR12 case fans controller use the latest SATA cable, connect the SATA interface on the power supply..
Check Stock

Arctic F8 PWM PST Value Pack (5 Units) - 80 mm PWM PST Case Fan - Five Pack | Silent Cooler with Standard Case | PST-Port (PWM Sharing Technology) | Regulates RPM in Sync

  • Innovative DESIGN enables quiet and efficient ventilation: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
  • Perfect case fan regulation with PWM: the PWM function allows the motherboard to run the fan precisely at its necessary speed this guarantees the required cooling and minimizes the noise level.
  • Pwm Sharing Technology (PST) lowers noise: The PST assures That all of your fans listen to one control signal EG you share the CPU cooler’s PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.
  • Long service life: The fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
  • Fan controller Made in Germany: The Arctic F8 PWM PST fan is well known for high airflow at a comfortable noise level The real improvement is the motor and controller our German engineers made this fan work at lower speed When performance is not needed.
Check Stock

6 Finger Mobile Gaming Controller with Cooling Fan & Finger Sleeve &Travel carrying case,for PUBG Call Of Duty Mobile Game controller Gaming Grip Trigger for 4.7-6.5 iOS Android Phone

  • ✈️ GREAT BUNDLE: Includes 6 fingers Mobile Controller with Cooling Fan,Portable case for the gaming grip,and finger sleeve sets. This Bundle....
  • ✈️ SIX-FINGERS PLAYING: Play Games with 6 Fingers, Define the Buttons You Like. More Comfortable,More Accurate and Faster.With the 4 triggers at....
  • ✈️ SILENT COOLING & BEST DESIGN: - With a Rechargeable Cooling Fan in This Controller, the Phone will Always Stay Cool While Playing Games.The....
  • ✈️ LATEST VERSION OF FINGER SLEEVE SETS: Made of Silver Fiber, Offering Great Screen Contact Experience. It features Anti-Sweat Breathable,....
  • ✈️ HARD STORAGE TRAVEL CASE: Specially Designed for the Gaming Controller. With High-density Eva and 1680d Material, It Prevents any Damages or....
Check Stock

ASIAHORSE WD-001 120mm 5V ARGB Motherboard 12 Addressable LED 9 Blades Hydraulic Bearing White Case/Radiator Fan 5 Pack-White

  • 【Motherboard ARGB Color 】12 addressable LEDs of 16.8 million colorsprovide balanced lighting coverage and brightness. Control fan lighting with 5V....
  • 【ARGB Controller】Analog ARGB controller - low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue,....
  • 【Gold Wire LED Bead】The LED bead is made of gold wire material, which can effectively reduce the LED exhaustion and keep the light in the best....
  • 【9 fan blade design】Designed for balanced air flow and static pressure,The notch design of each fan blade edge can effectively reduce wind noise,....
  • 【Silent & LongLife】The structure of low friction hydraulic bearing makes the fan run noiseless, the air volume is larger for quiet operation....
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions..
Check Stock