Reviews Card Reader Module

HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

  • The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip..
  • Easy to use, low cost, and applicable to equipment development and card reader development etc..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • The module can be directly loaded into the various reader molds..
  • The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance..
Check Stock

HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

  • The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver..
  • SCM system can be completed within a file MicroSD card .Support Micro SD Card, Micro SDHC card (high speed card)..
  • 3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply..
  • Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal....
  • Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module....
Check Stock

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

  • The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, with pin header. The module can be directly loaded into the various reader molds..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • Module Interface: SPI， Data transfer rate: Maximum 10Mbit/s..
  • Power Voltage : 3.3V,Operating frequency: 13.56MHz..
Check Stock

IC/ID Card Machine, Smart Keyboard FRID Access Control Reader(ID)

  • Fast card reading: convenient and fast time-saving card reading time is less than 1s, card reading distance is less than 0.5s, card reading time is less than 0.2s. Card reading distance: 0~80mm.
  • Sensitive reading: The internal radio frequency module and its in-line expansion controller are used to read the card sensitively..
  • Non-slip design: The back of the card reader is a non-slip design with four corners. It is not easy to slide down and can be fixed more stable..
  • Button material: See the use of high-quality crystal materials, special craftsmanship, wear-resistant, easy to clean, comfortable to touch, increase keyboard life..
  • Supporting:With PS/2 keyboard interface, USB interface for keyboard emulation, RS-232 serial output, RS-485 serial output. 2.4GHz/Bluetooth wireless transmission..
Check Stock

1.44Inch TFT Display Module LCD Display Screen 128RGB x 128 Resolution Serial Peripheral Interface

  • The display module is connected with other board via a serial peripheral interface. It is designed with one socket for sd card which makes it very convenient..
  • The display model is a-TFT with a display size of 1.4in with the high quality driving IC chip ST7735S, the module works more stable..
  • The lcd display screen is graphical 128RGBx128 dot . The LCD effective area is 25.5x26.5mm and the size of each pixel is 0.20x0.20..
  • The lcd display screen is ideal for clear presentation of texts, graphics and images, with a large 1.8 inch sized screen and integrated SD card reader..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

Goodgo Original DVD Drive Replacement Repair Part for Nintendo Wii Plug-and-Play Unit

  • Laser Lens Disc Drive RAF-3355 Module Replacement Compatible with Nintendo Wii Scanner Game Read Light Video Reader.
  • Tips: This is Laser Lens Disc Drive RAF-3355 Module replacement to replace your old damage Laser Lens Disc Drive RAF-3355 Module, don't include instructions, please install it by a professional technician..
  • Broken your Laser Lens Disc Drive RAF-3355 Module, don't need to change new machine, just buy this item and replce your damage Laser Lens Disc Drive RAF-3355 Module, let your Device work again again..
  • Compatible with: Nintendo Wii Scanner Game Read Light Video Reader (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
Check Stock

AITRIP 2PCS PN5180 Module NFC Module Supports ISO15693 RFID HIGH Frequency IC Card ICODE2 Read and Write Module

  • 2PCS PN5180 NFC RF I Sensor ISO15693 RFID High Frequency IC Card ICODE2 Reader Writer.
  • PN5180 supports card emulation and PEER TO peer mode, NFC chip..
  • PN5180 can support more cards with different protocols (ISO / IEC 18092.14443 A / B, FeliCa, 15693).
  • Module uses serial peripheral interface SPI.
  • Application：Pay，Physical access control，E-government，Industrial control.
Check Stock

LCD 12864 Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa

  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. Please note: With a SD Card base on back,SD card not included..
  • You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card..
  • All actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller..
  • Print your 3D designs without PC, just with a g-code design stored on the SD card..
  • LCD 12864 graphic smart display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking..
Check Stock

GT MEDIA V8X HD DVB-S/S2/S2X FTA Digital Satellite Receiver, Free to Air Built-in 2.4G WiFi TV Sat Decoder Supports Intelsat 901 at 27.5°W BBC Channel.

  • [CA Card Reader and Multi-room] allows you to share your CA card with other receivers on the same network, which means that if you insert one CA card into our satellite receiver, then the receiver in your other rooms can also use the card at the same time, but they need to be on the same network..
  • [DLNA and Sat to IP] DLNA function supports transmitting the video in your phone and tablet on a large TV screen. Sat to IP function supports satellite TV program transmit to your mobile phone, tablet and other device via GTShare..
  • [Built-in 2.4G WIFI Module] This satellite receiver is with integrated 2.4G WiFi module, Ethernet and 3G dongle supported. You can connect WiFi or wired network to watch YouTube videos and online movies..
  • [Channel Search] Support automatic network search for new added transponders. 6000 channels TV and Radio programmable. Supports 7 days electronic program guide and various channel edit functions (favorite, move, lock, skip, delete, rename, find, sort). There is Parental control for channels. It can control the viewing rights for each program..
  • [USB Port Soft-upgrade] Software upgrades through USB port, or FTP upgrade. The USB port also supports PVR video recording and media files playback function..
Check Stock

8' Flexible Gripster Tripod for Canon Powershot SX740 SX70 HS

  • Waterproof down to 16' (when in the included Mounting Frame).
  • 8x slow-motion with 4K Boost lens, 4x with 360 lens.
  • Core module with a touchscreen live-view display.
  • Mounting frame with heat-dissipating design and wind resistance.
  • Bundle Includes: Insta360 ONE RS Twin Edition Camera, Manufacturer Accessories, SanDisk 64GB Extreme UHS-I microSDXC Memory Card, Floating “Bobber” Handle, Multi Adjustable Bike / Pipe Mount, Chest Strap with Action Camera Mount, Head Strap with Action Camera Mount, Selfie Stick with Action Camera Adapter, Mini “Gripster” Tripod, 2x J-Hook Buckle, Adhesive Mounts for Action Cameras, High Speed Memory Card Reader, Trifold Memory Card Wallet, Deluxe 5PC Maintenance Kit.
Check Stock