Reviews Carbon Steel Angles

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear HLK103Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Pruning Saw 13 in Blade

  • IDEAL FOR LARGE BRANCHES: 13 inch blade ideal for cutting 7 inch diameter branches.
  • INNOVATIVE ERGONOMIC HANDLE: Pistol grip and finger hook provides efficiencies for Professional Arborists.
  • 3 SIDED RAZOR TEETH FOR EFFICIENT CUTTING: Triple ground teeth cut more material at greater angles per saw pass.
  • LONG SERVICE LIFE: Impulse-hardened teeth extend durability of the saw sharpness.
  • HIGH-CARBON STEEL BLADE: Made of Japanese SK5 steel with exceptional hardness and durability for a long-lasting tool.
Check Stock

120V 1600W PVC Vinyl Flooring Hot Air Welding Tools Heat Gun Kit with Quarter Moon Trimming Skiving Knife, Vinyl Hand Groover, Speed Welding Nozzles and Triac S Plastic Welder Heating Elements

  • Top notch work on floor coverings, asphalt roofing, and all flexible materials.
  • Use for Flooring, Carpet, Vinyl & Drywall.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear NB24B Spur Gear, 14.5 Pressure Angle, Steel, Inch, 16 Pitch, 0.500\ Bore, 1.625\ OD, 0.500\ Face Width, 24 Teeth

  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles.
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Check Stock

TenkBuff Adjustable Hacksaw Frame Set, 12 Inch Heavy Duty Hand Saw with 10 Extra Blades, Two Sawing Angles(45°/90°) for Sawing Wood, PVC Pipes, Steel Pipes, Frozen Meat (Upgrade, Yellow)

  • 【SUPERIOR QUALITY】TenkBuff multifunctional hacksaw frame is made of high-quality aluminum alloy and high carbon steel, which is exquisite and durable for long-term use..
  • 【TWO SAWING ANGLES】Hacksaw blades can be installed as 45 degree or 90 degree according to the needs of daily use, which makes the work easier and more convenient. .
  • 【NON-SLIP HANDLE】The front and rear handles are wrapped with soft rubber, which reduces the fatigue of the arm during use, greatly saves your strength and makes your work more convenient and efficient. .
  • 【SAW BLADES】TenkBuff hacksaw frame is equipped with 11 high-quality blades(1 bi-metal 24T blade, 5 high carbon steel 24T blades and 5 high carbon steel 18T blades), the sharp blades are widely used in sawing wood, steel pipes, PVC pipes, frozen meat, bones and so on..
  • 【QUICK REPLACEMENT】Any 12inch(300mm) blades are suitable for TenkBuff hacksaw frame. If you want to change the blade, just rotate the adjustment knob below the handle. The replacement of the saw blade is really easy and quick without effort..
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock