Reviews Carbon Spiral

Boston Gear HLSK103YL Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Shimano Fishing Skixx Muskie 80 H Freshwater Muskie [SKC80H]

  • Spiral X construction enhances catching power for anglers. Spiral X construction consists of three layers: a middle layer of vertical fibers as well....
  • Hi-Power X construction uses diagonally-wrapped carbon tape to form an array of “X” shapes on the rod blank’s outermost layer. The width of the....
  • Shimano Original CI4+ Reel Seat: CI4 is a Shimano original material reinforced with carbon fiber. It is lighter and has higher strength than....
  • Fuji Back Stop locking nut to prevent loosening.
Check Stock

Fiblink Surf Spinning Fishing Rod 2-Piece & 3-Piece & 4-Piece Carbon Fiber Travel Fishing Rod with Noctilucent Tip (15' - 4Pcs - Orange)

  • Excellent Design – Fiblink Surf rods provide strength, performance and style. Composite blanks, stainless steel guides, high-strength reel seat and our tough and tacky rubber shrink tube handles provides a secure grip whether wet or dry..
  • Carbon Fiber Construction – Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing. The Noctilucent tip makes the pole stand out at night..
  • High-Quality Guides – Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • Non Slip EVA Spiral Handle – Non slip EVA spiral handle with tapered rear grip. The spiral handle makes the grip more comfortable and more ergonomic. Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below. Wheel seat with stainless steel tapered hood transitions above and b....
Check Stock

SHIMANO Teramar XX NE Spinning Saltwater|Inshore|Spinning Fishing Rods, 1pc - Power: Medium Heavy - Action: Fast - Lure Rating: 1-3, Length: 7'0' - Lure Rating: 1-3

  • Spiral X: Through its exclusive lightweight structure, Shimano's patented Spiral X construction enhances catching power for anglers. Spiral X construction consists of three layers: a middle layer of vertical fibers as well as inner and outer layers, both comprised of carbon tape that tightly winds the blank diagonally in opposite directions.
  • Hi-Power X: Hi-Power X construction uses diagonally-wrapped carbon tape to form an array of shapes on the rod blank's outermost layer. The width of the tape, its winding angle and the part of the rod being wrapped are fine-tuned according to the target fish species. This manufacturing process allows Shimano to adjust these wraps during construction for precise actions, enhanced overall strength and added twist resistance.
Check Stock

Gunsmithing At Home For Beginners And Novices

  • ...SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill these fasteners.
  • PREMIUM SERVICE - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problem....
Check Stock

Bessey HS-6 6-Inch Wood Handscrew Clamp

  • Adjustable jaws for a strong grip or delicate for those small projects.
  • Oiled wooden jaws won't damage or slip on your work piece.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from Cold Drawn, carbon steel..
  • Acme thread for Rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, Extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard Maple for a lifetime of use, are oiled to resist glue..
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock

12 Pcs Scroll Saw Blades, with Spiral Teeth for Wood Metal Plastic Cutting Sawing Carve(#5)

  • The thicker item you want to cut, the saw blade should be. It is suggested that use #1, #2, #3 saw blade to saw the metal.
  • Spiral scroll saw blades Sharp tooth resists loading and improves cutting speeds.
  • Forged from high carbon steel, through fine process, with high hardness and strength.
  • Spiral scroll saw blades variety pack This package is a total of 12pcs saw blade, convenient to replace the broken or worn one.
  • Curve sawing is very relaxed, scroll saw blades spiral the blade is not stuck.
Check Stock

Topec 49pcs Screw Extractor/Drill Bit Set, Professional Remove Set for Removing Broken Studs, Bolts, Socket Screws and Fittings

  • ...SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill these fasteners.
  • PREMIUM SERVICE - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problem....
Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

  • Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
  • ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
  • ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
  • ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
  • ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check Stock

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock