Reviews Carbon Black Heavy Springs
ATPEAM Macpherson Strut Spring Compressor 2pc Heavy Duty Coil Spring Compressor Strut Remover Installer Tool, 13/16in Socket 1/2in Drive
- ...ed off, position both set of hooks, opposite each other, tighten the threaded rod with even pressure on both sides, then remove the fastener nut holding the cartridge. This heavy duty coil spring compressor repairs bent and damaged parts and performs the necessary suspension maintenance on the macPherson struts and springs found in most small and medium-sized cars.
- Heavy-Duty: This heavy duty strut spring compressors is made of strong carbon steel, and black anodic oxidation coating to prevent rust and corrosion, high durability and corrosion resistance under even punishing use, constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair.
- Safe & Stable Grip: The wide end pieces lock on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils.
- Contents: 2pcs 10.5 inch range coil strut spring compressor with sa....
Check StockOrion Motor Tech Spring Compressor, 11.5\ Universal Coil Spring Compressor, Heavy Duty Strut Compressor for Car Truck ATV UTV Motorcycle, Spring Compressor Tool Automotive 1/2\ Drive, 13/16\ Hex
- IDEAL FOR MOST VEHICLES: This heavy-duty spring compressor tool by Orion Motor Tech repairs bent and damaged parts and performs the necessary suspension maintenance (recommended every 50-80,000 miles) on the MacPherson struts and springs found in most small and medium-sized cars.
- SAFE & STABLE GRIP: The wide end pieces lock of the strut compressor on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision.
- EXTRA WIDE RANGE: Working with your manual or power tool's 1/2-inch square drive or 13/16-inch hex sockets, our Acme rods and end pieces of the strut spring compressor kit offer a 10.6 inch range, wider than the competition to work with more vehicles.
- BUILT TO LAST: Our pair of heavy-duty strut spring compressors boasts high durability and corrosion resistance under even punishing use thanks to their heat-treated carbon steel construction, black oxide finish along the threaded rods, and galvanized end pieces.
- 1-YEAR WARRANTY: Orion Motor Tech backs these spring compressors with a generous 1-year warranty as well as our usual friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check StockKUNTEC Universal Interchangeable Fork Strut Coil Spring Compressor Macpherson Tool Extractor
- Interchangeable strut coil spring compressor tool is designed to assembly and disassembly almost any types of Macpherson style coil springs, compatible for BMW and Mercedes Benz.
- Three sets of configuration options, can used for 65-125mm(Golden yokes), 88-160mm(Black yokes), 126-212mm(Silver yokes) shock absorber spring, can meet your different needs of replacing coil spring.
- Coil spring compressor tool is made by forged high carbon steel.Heat treatment would help carbon steel achieve high hardness and good wear resistance, which can provide a longer service lifetime..
- The anti-slip locking mechanism ensures the struts are compressed safely.
- features a yoke extension bracket that also allows use on conical springs..
- Package list: 1pc compression rod, 6pcs yokes, 1pc adjustment hook, 6pcs fixing screws, 1pc blowed case for easy carrying and storage..
Check StockABN Coil Spring Compressor Tool Coil Tool Coil Spring Compression Tool Coil Compressor Suspension Spring Compressor
- EASILY INSTALL COIL SPRINGS: Use the ABN | Coil Compressor Tool to help you install coil springs and coil spring spacers.
- FITS YOUR RIDE: Safely compress “loose” coil springs (no shock in the middle of the spring) and the main coils between the upper/lower control....
- Insert this coil springs compressor through the center of the coil spring, engage the hooks with screw shaft....
- BUILT TO LAST: Constructed from heavy-duty metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion.
- EASY STORAGE: Heavy-duty 13” x 2.5” x 7.8” inch (33cm x 6.4cm x 19.8cm) plastic blow-molded carrying case with latches and built-in handle for....
Check StockSupreme Suspensions - Universal Add-A-Leaf Spring Installation Tool | Heavy Duty Forged Steel Leaf Spring Unloading/Compressing Tool Powder Coated Black
- HEAVY-DUTY TOOL DESIGNED TO SAFELY INSTALL A SET OF ADD-A-LEAFS OR IN-PACK-HELPER SPRINGS.
- Suitable for Most Trucks and SUVs with leaf spring suspension..
- CONTENTS: (1x) Leaf Spring Unloading/Compressing Tool, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: Cold-Forged from High Strength Carbon Steel for Maximum Strength and Durability.
- Self-Centered, U-Shaped Design to Completely Surround the Spring Pack Allowing an Even Unloading and Compression of your Leaf Springs..
- EASY TO USE: Position the Leaf Spring Unloading/Compressing Tool over the spring pack, and tighten down the compression bolt to safely unscrew the center pin nut, and remove the leaf pack center pin. After removing the center pin, loosen the compression bolt until the springs decompress, allowing you to safely add the new add-a-leaf in the appropriate location. Reinstall the leaf pack by tightening the compression bolt and reinstalling the center pin..
- BENEFITS: Allows for Even Unloading and Compression of your Leaf Springs to install a set of Add-a-Leafs or In-Pack-Helper Springs..
Check StockGarage Door Torsion Spring Set | 207X2X22 (Right and Left Side) | Without Winding Rods | Left & Right Hand Garage Door Torsion Springs Pair | Garage Door Spring Replacement Kit for Repair
- ⍟ CORROSION RESISTANT: Replace your garage torsion spring with these black-coated garage door side springs. Our garage door springs set comes with left & right-side corrosion-resistant garage door torsion springs giving you more for less with every purchase!.
- ⍟ FIND YOUR PERFECT SIZE: These heavy-duty springs are available in multiple sizes. Because the torsion springs for the garage door provide lifting force for your heavy garage door, it must be selected by the spring’s dimensions, rather than the door’s weight. So, before purchasing, please view our garage springs replacement size guide in the listing image section to pick the correct length and wire size..
- ⍟ 1 YEAR WARRANTY: This garage door spring set comes with a 1-year replacement warranty. Our tension spring garage door design guarantees long life with more than 10,000 cycles..
- ⍟ REPLACE WORN OUT GARAGE SPRINGS: Add this garage door tension spring replacement set to your door spring kit for easy replacement and installation. While there are helpful online videos on how to install garage door torsion spring replacement and replace broken or worn-out springs, we recommend a professional installation by a repairman..
- ⍟ NOTE: This garage door springs pair set requires the use of two wi....
Check StockNew! Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door (Green)
- DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
- MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
- EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
- CONE TYPE: Diamond cones, stationary cones..
- CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check StockDURA-LIFT .207 x 2\ x 23\ Torsion Garage Springs (Yellow, Left & Right Wound)
- DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Doors (0.295x2x41). (Black/Right).
- MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
- EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications.
- CONE TYPE: Diamond cones, stationary cones..
- CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check StockExacme 15FT High Weight Capacity Trampoline Outdoor with Basketball Hoop and Enclosure for Kids 15 Foot Big Backyard Trampoline 400LB Heavy Duty with Safety Net and Ladder L15+BH07BL
- [ STURDY T-JOINT FRAME Structure ] Each frame rail and leg extension tube of 15FT Exacme outdoor trampoline are fixed by metal t-joint. Compared with....
- [ CARBON FIBER RAIL SUPPORT NET ] Top of trampoline net is supported by 12 carbon fiber rails, which is in high strength and corrosion resistance,....
- [ FOAM PADDED NET POLES ] All poles of 15 Foot Exacme Trampoline Enclosure Net are padded with black foam tubes, effectively prevent kids from getting....
- [ 2021 UPGRADE SPRING COVER ] The safety spring cover is filled with 0.6" foam inside. Extra straps were added to the inner side of the spring cover....
- [ 400 LBs WEIGHT LIMIT Trampoline] Thanks to the heavy-duty galvanized steel frame, T-joint structure, 6 U-legs, and 108pcs galvanized 7'' springs,....
Check StockElectric Motor Centrifugal Switch,L16-152S Centrifugal Switch L16-152S Electric Motor Rotating 16Mm Bore Centrifugal Switch Replacement for Single Phase Induction Motor
- Package Content: 10 x Motor Carbon Brushes.
- Carbon Brush Size Approx : 19 x 7 x 6mm/0.75 " x 0.275 " x 0.24"(Lx w x h).
- Total Length Approx :(When Spring Stretching) 5.1cm/2 " Carbon Brushes with wire leads and brush springs atttype.
Check Stock