Reviews Carbide tipped Reamer

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Utoolmart Chucking Reamer 3/4\

  • Specifications: Cutting dia.: 3mm / 0.12".
  • accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

VINWOX 20\ Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Carbide Turning Tool, Including Rougher, Finisher, Square Radius, Detailer

  • PRESS ✅PROMOTION or ✅EXTRA SAVING FOR FREE GIFT! The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock