Reviews Carbide Tipped Drill Bits

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing 3/8 Dia x 1/8 Drill Dia x 1/4 Inch Quick Release Hex Shank

  • IDEAL FOR EVERY WOODWORKER – 82 Degree Countersink set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing..
  • SET INCLUDES – Drill bits set includes a countersink bit, a slow spiral, HSS M2 fully ground drilling bit, and a quick-release 1/4" hex shank..
  • EXCELLENT FOR CUTTING – Use the drill bits for wood-working of Natural Woods, Man-Made Boards, MDF, Chipboard, Plywood, Aluminum/Non-Ferrous, Aluminum Composite Material (ACM), Decking Materials, High Density Polyethylene (HDPE)..
  • CARBIDE TIPPED – Special carbide-tipped drill bits made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

DEWALT Drill Bit SDS MAX Shank 16-Inch DW5912

  • Carbide-tipped, 2-piece design of the drill bit is made for easy diameter changes.
  • Replaceable center bit for maximum tool life of the drill bits for wood, metal and plastic.
  • Alternating tooth design of DEWALT drill bits delivers increased durability and quicker centering.
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Ryobi P721 One+ 1,800 Lumen 18V Hybrid AC and Lithium Ion Powered Flat Standing LED Work Light with Onboard Mounting Options Battery and Extension Cord Not Included Light Only

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x....
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

MAX-CRAFT Masonry Drill Bit Set 1/4 in Golden Flute Drill Concrete Stone-10Pcs

  • ✔️MASONRY DRILL BIT DIMENSION: 1/4"(Diameter) x 3-23/32" (Overall length).
  • ✔️QUANTITY/PACK: 10 Pcs Masonry Drill Bit in a Package..
  • ✔️MATERIAL: Premium High Grade Carbide Tipped for Cutting Point for best fast penetrating and Hardened HCS and CRV Steel for Masonry Drill Bits....
  • ✔️CARBIDE TIP POINT: The 130 deg. cutting point to enable easy cutting and best self-centering without Walking off When Drill Through Bricks,....
  • ✔️CONCRETE DRILL FLUTE: 2 Flutes parabolic flute design to ensure the quick easy chips removal..
Check Stock

WSOOX Square Hole Drill Bits for Wood, Woodworking Hole Saw Mortising Chisel Drill Bits (Size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch)

  • 【Purchase Notes】The square hole drill bits need to be used in conjunction with the mortise machine. These drill bits not usable with a hand held drill. If you want to use these drill bits on drill press, you need accessories to connect to a drill press..
  • 【Drill Bits Sizes】Drill bits diameters: 1/4 Inch (6.4mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 1/2 Inch (12.7mm)..
  • 【Easy to Drill】The carbide drill bit tipped is sharp and wear-resistant. With high hardness and long service life. The drill sleeve has a U-shaped design to facilitate the discharge of wood chips and improve the drilling efficiency..
  • 【Widely Applications】This square hole drill bit is suitable for wood, including MDF, MDF, particle board, channel wood, pine wood, basswood, etc. Note: It is not suitable for processing metal, glass, plastic, concrete, gypsum board etc..
  • 【After-sale Service】WSOOX tools store provide customers with quality but affordable tools. If you have any problem with these square hole drill bits, please contact us feel free and we will reply you within 24h..
Check Stock

OCR Masonry Drill Bits Set, Triangle Drill Bits Set for Tile, Brick, Cement, Concrete, Glass, Plastic, Cinder Block, Wood, Bits for Power Drills, 6/8/10/12mm, 5pcs

  • 【Material】Triangle Drill Bit is made of high-quality carbon steel, has durability, rust resistance. Spiral chip removal space design to speed up chip removal and improve work efficiency..
  • 【Durable】Carbide tipped drill bits with special sharpening technology ensure drilling efficiency with less incision resistance..
  • 【U Slot Drill】The threaded U-shaped flute design is smooth and flat, allowing the chip to be removal quickly. Greatly improving the punching efficiency..
  • 【Applications】Industrial strength carbide drill bit tip can easily penetrate tiles, glass, cinder blocks, hard plastic, cement, concrete, mirrors, windows, travertine, bricks, wood and more!.
  • 【Package】Total 5 Pcs drill bit with 4 different sizes:6mm, 8mm, 10mm, 12mm. Triangle drill bits are packaged in a hard plastic container..
Check Stock