Reviews Carbide Tipped Chucking Reamer

.196\ Diameter Carbide Tipped Chucking Reamer, 56551960

  • Chucking Reamer: Size: 4mm, 5mm, 6mm, 8mm, 10mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

7-Piece HSS Chucking Reamer Set, 1/8 Inch - 1/2 Inch

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

uxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

TTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

Prolinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes

  • Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
  • Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.
Check Stock

Indexable Lathe Turning Tool,1/2\ Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Upgraded Design and Materials: The Tipped Woodturning Tool tips are made of tungsten carbide material, which makes the cutter stronger and sharper, improves the working efficiency and increases the service life of the cutter head. The shank is made of stainless steel, which is strong and wear-resistant. The handle is made of aluminum oxide with a polished surface, smooth to the touch, comfortable and durable..
  • Package Contains: ① 2PCS Tool Handle 11 in.
  • ⑤ 1PCS Carbide Tipped Swan Neck Hollower 10 in.
  • Easy to Use: New double control fixed design, makes the knife body more firm, prevents looseness and knife warping during operation. The sharp high-density tungsten carbide lathe blade makes cutting wood extremely easy, and the interchangeable and replaceable cutter head allows you to change at any time..
  • Details Oriented: 19 IN-28 IN Adjustable length Wood Turning Tools, Rougher /Detailer/Finisher/Swan Neck Hollower four kinds of head freely switch, can meet the working requirements in various scenarios. Square shaft profiles help to keep tools flat on t....
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs

  • Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock