Reviews Carbide Coated Hole Saws

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

MILWAUKEE 2-1/4 in. Hole Dozer with C

  • Longest Life in Stainless Steel | Carbide Teeth for 50X Life in Extreme Materials.
  • Milwaukee Carbide Teeth Technology | For the toughest applications where bi-metal hole saws cannot cut.
  • Outperforms Bi-metal hole saws | 4tpi Carbide Teeth Design gives Best Durability and Longest Life in Extreme Applications.
  • Thermoset Coating reduces friction and drag, increasing overall speed and cordless efficiencies | Plug-Jack T-Slot's enhance user productivity by providing best access and leverage to remove material slugs.
  • Cuts Stainless Steel, Fastener Embedded Wood, Cement Board, Fiberglass, Plaster, Asphalt Shingles and More | Made in USA.
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Disston QUICKCORE 2 1/8\ TCT Tungsten Carbide Tipped Hole Saw 10X Faster CORE Ejection Quick Change E0100180

  • QuickCore's Patented Technology provides 10x FASTER HOLE EJECTION through it unique open-ended design.
  • TCT - TUNGSTEN CARBIDE TIPPED provides extended life and clean cuts.
  • ONE QuickChange MANDREL for sizes 3/4" to 6".
Check Stock

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

AUTOTOOLHOME TCT Hole Saw for Steel Tungsten Carbide Tipped Hole Saw Drill Bit T.C.T Hole Cutter with M2 Titanium Plated Pilot Drill Bit Professional for Hard Metal Stainless Steel Cast Iron (2-3/8\(60mm))

  • This Tungsten Carbide Tipped hole saw made from high quality TCT Carbide,carbide tooth with high hardness and good wear resistance.,with detachable M2 Titanium-Plated Pilot center drill bit ,higher hardness, better positioning, and no rust,it's hard to break.an excellent alternative to traditional Bi-Metal Hole saws..
  • Quick cutting, more precise, smooth,longer service life cuts up to 1~25mm thick material like stainless steel, high alloy steel, aluminum, castings, section steel, iron, copper and other hard alloys. plastic,wood, FRP and PVC.Note: Cannot be used for concrete, tiles and stone..
  • This TCT hole Saw teeth designed with Three-blade,with outer blade, middle blade, inner blade, small incision resistance and no burrs during drilling. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.ideal for cutting hard metals.
  • T.C.T. cutters widely used for electrical construction, transit work and general metal fabrication.Suitable for installation in drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or ....
Check Stock

Barb Drill Bit, Multiple Sizes Tapered Hole Drilling with Center Punch for Metal Plastic Wood Plates

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

TCT Hole Saw Set 3pcs JESTUOUS 3/8 Inch Shank Diameter 7/8 1-1/8 1-3/8 Cutting Dia Carbide Tipped Tooth Round Drill Bit Hole Kit Cutter for Stainless Steel Metal Wood

  • Carbide tipped hole saws are suitable for electric drills and platform drills..
  • High quality tungsten carbide materail teeth,reduce the damage of tips,increase the endurance,provide a longer service life..
  • Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,FRP,etc..
  • Designed with precision ground,sharp tough gears and stepped pilot drill bit to drilling more precise,smooth,faster and safer,leave perfect cutting results..
  • Package: 3 hole saws(cutting diameter:22mm/29mm/35mm)+extra 2 pilot drill bits+extra 1 ejector spring with plastic case..
Check Stock