Reviews Car Stereo Capacitor

OzCharge RescueMate 12-Volt Super Capacitor Jump Starter – 1000 Amp

  • ✔️ Exceptional Engine Cranking Power – The ultracapacitor designed to assist car battery. Booster deliver EXTRA 450 Amp engine starting power. 15 Volts / 90 Farads Pack, for all 12 volts gasoline or diesel engine vehicles..
  • ✔️ Works In Extreme Weather Conditions – Performs down to –40°F and up to +158°F (–40°C to +70°C). A+ MAX super capacitor battery jump starter operates in freezing winter or in burning summer, no need to worry your car batteries do not have the power needed to start the engine..
  • Car Audio / multi-subwoofers Stereo System Voltage Stabilizer, Peak Current Booster.
  • ✔️ Easy Spark Free Installation – Safety switch design, keeping you from risks of spark or explosion..
  • Stabilize peak amperage draws and protection from power surges.
Check Stock

3 Car Audio Speaker Tweeter - 1000 Watt High Power 3 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2k - 25 kHz Frequency, 109 dB, 4-8 Ohm, Heavy Duty 100 oz Magnet - Pyramid TW57

  • 1000 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 1000 watt peak power / 500 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 109 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of todays cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 3-inch super titanium car audio speaker tweeter w/ high temperature voice coil, die cast aluminum frame, and has a 5" diameter / 2 mounting depth.
  • STRONG STRUCTURE: This complete tweeter has a 100 oz magnet structure and comes with a crossover capacitor. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock

Audiobank AB-TW220 3.75 inch 600 Watt Car Audio Heavy Duty Compression Super Horn Tweeter/Die cast Aluminum Frame/Frequency Response: 2000 Hz - 20000 Hz

  • 300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this tweeter with 3.25" aluminum bullet horn w/1 inch super titanium tweeter. The heavy-duty housing and structure provides a strong foundation.
  • COMPLETE PAIR: This complete set includes a pair of aluminum die-cast super titanium tweeters with 30 oz magnet structure, capacitor crossover network, and mounting hardware which are very easy to install.
Check Stock

1.5\ Car Audio Speaker Tweeter - 400 Watt High Power 1.5 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2 kHz-25 kHz Frequency, 105 dB, 4-8 Ohm, Heavy Duty 60 oz Magnet - Pyramid TW46

  • 400 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 400 watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4/8 OHM IMPEDANCE: This car tweeter has 105 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 1.5 inch super titanium car audio speaker tweeter with die cast aluminum frame and has a 4" diameter / 2.5" mounting depth.
  • STRONG STUCTURE: This complete tweeter has a 60 oz magnet structure and comes with a capacitor crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock

1” Car Audio Speaker Tweeter - 300 Watt High Power Super Titanium Tweeter System w/ 3.75 Inch Aluminum Bullet Horn, 2kHz-25 kHz Frequency, 98 dB, 4-8 Ohm, Heavy Duty 20 oz Magnet - Pyle PDBT19 (Pair)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

  • ...t ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.
Check Stock

3.25\ Car Audio Speaker Tweeter - 300 Watt High Power Aluminum Bullet Horn with 1 Inch Super Titanium Tweeters, 2 kHz - 25 kHz Frequency, 96 dB, 4 Ohm, Heavy Duty 30 oz. Magnet - Pyramid TW18 (Pair)

  • 300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this tweeter with 3.25" aluminum bullet horn w/1 inch super titanium tweeter. The heavy-duty housing and structure provides a strong foundation.
  • COMPLETE PAIR: This complete set includes a pair of aluminum die-cast super titanium tweeters with 30 oz magnet structure, capacitor crossover network, and mounting hardware which are very easy to install.
Check Stock

Pyle 1 Car Audio Speaker Tweeter-300 Watt High Power 1 Inch Super Titanium Tweeter System Die Cast Aluminum Frame 2kHz 20 kHz Frequency,104 dB 4-8 Ohm,Heavy Duty 30 oz Magnet PDBT28 5in.x 5in.x4in.

  • 300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300 watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 20 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2kHz - 20 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4/8 OHM IMPEDANCE: This car tweeter has 1'' High Temperature Kapton Voice Coil, 104 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio speaker tweeter with die cast aluminum frame and has a 3.125" diameter / 2" mounting depth.
  • STRONG STUCTURE: This complete tweeter has 50 oz. magnet structure and comes with a myla capacitor crossover network. The heavy duty housing and structure with diamond chrome cutting finish provides a strong foundation and it is super easy to install.
Check Stock

Swpeet 240Pcs 24 Kinds Different Electrolytic Capacitors Range 0.1uF－1000uF Assortment Kit, 10V/16V/25V/50V Aluminum Radial Leads Electrolytic Capacitors for TV, LCD Monitor, Radio, Stereo, Game

  • [ VARIOUS KINDS]: 240Pcs 24 different Kinds electrolytic capacitor, Including range 0.1uF－1000uF assortment kit. All capacitor come in a handy box with clearly labeled compartments, parts inside will not slide or move around..
  • [ STABLE QUALITY ]: High quality Aluminum electrolytic capacitor, temperature range from -40℃ to +105℃, tolerance ±20%, stable and long service life..
  • [ CLEARLY MARK ]: Marker code on every electrolytic capacitor, and with a lable mark capacitor value, easy to distinguish.
  • all capacitors are packed in re-use box, easy to manage, you could also add your other resistors transistors diodes capacitors in this box..
  • [ WIDE APPLICATIONS ]: Tinker, DIYer and hobbyists must! Great for repair and modification of TV, LCD monitor, radio, stereo, game console, microwave, prototyping, etc. good for repairs and little projects..
  • [ WHAT YOU GET ]: In this kit, You will get 240Pcs 24 Kinds electrolytic capacitor, include 10V 16V 25V 50V, from 0.1uF to 1000pF, a decent mix of capacitors wit a range of applications. Excellent humidity resistance, Miniature size, wide capacitance..
Check Stock

MTX Magnum MB210SP 10-Inch 400W RMS Dual Subwoofer System Soundstorm AKS8 8 Gauge Complete Wiring Kit and Boss Audio CPBK2 2 Farad Power Capacitor

  • IDEAL CAR AUDIO PACKAGE: Package includes a dual 10-inch car subwoofer enclosure with amp, complete wiring kit, and a digital capacitor.
  • DUAL SUBWOOFER WITH FOAM SURROUND: Subwoofer features a polymer-coated pulp cone with foam surround.
  • SUBWOOFER ENCLOSURE: Enclosure features a textured polypropylene cone with a large roll rubber surround.
  • COMPLETE WIRING KIT: 8 gauge amplifier installation kit with everything you need to install your amplifier in your car.
  • DIGITAL POWER CAPACITOR: 2 Farad 20-Volt LED Digital Voltage Car Audio Power Capacitor.
  • Capacitance: 2 farads, 2 million microfarad.
Check Stock