Reviews Car Bumper Steel Guard

Rear Bumper Protector for Cars SUV Universal Bumper Guard Corner Protection Prevent from Scratch & Low Speed Impacts

  • ✔ The car bumper protector protects the rear bumper from low-speed impacts from parking thereby preventing scratches. NOTE: DO NOT drive with it on....
  • ✔ Rear bumper guard is made of high quality and high density durable foam material, strong bumper guard, can effectively protect the bumper from....
  • ✔ This car SUV bumper guard size is 72" x 8.07" x 0.4" inches. PLEASE MAKE SURE THAT THE BUMPER PROTECTOR SIZE IS NOT TOO LARGE FOR YOUR CAR.
  • ✔ The bumper is fully protected, the back bumper guard extra length goes around the corners to protect corners well, too. Your bumper is protected....
  • ✔ Easy to install, installation with no damage, 2 velcro straps with elastic and 2 extension hooks to secure it in the place. The bumper guard will....
Check Stock

Ultimate Protective License Plate Cover and Bumper Guard | Thick Heavy Duty Rubber Prevents Scratches and Dents in Low Impact Bumps | Universal Fit for Cars,Trucks SUVs and Vans Screws Included

  • THE BEST CAR ACCESSORY YOU CAN GET - Provide maximum protection to your vehicle's bumper with this 2.3 inches AR-PRO Ultimate License Plate Bumper Guard. It's more than just a handsome new accessory for your car. It can protect your front bumper from scratches and dents during low-impact bumps. Upgrade your front bumper protection with this jet-black, thick, and durable license plate holder and bumper protector..
  • THICK, HEAVY-DUTY RUBBER LICENSE PLATE MOUNT - At 2.3 inches thick, this rubber license plate frame can take a beating. Made from heavy-duty rubber, the frame has a high impact and tensile strength. It can withstand the impact and surface abrasions from backing up accidents and garage wall mishaps. As it is thicker and more well-built than most bumper guards, this design can withstand rougher bumper taps and provide a wider breadth from obstructions in front of the car..
  • UNIVERSAL FIT ULTIMATE LICENSE PLATE BUMPER GUARD - With great looks that perfectly combine with its fantastic function, the AR-PRO Ultimate License Plate Bumper Guard keeps your car's front bumper in pristine condition whether you have an SUV, van, or truck. This front bumper protector fits standard US license plate size of 6 inches by 14 inches. And with an adjustable mounti....
Check Stock

2-Pack Car Bumper Corner Antenna Pole Adjust Driving Parking Marker Protector for Green Hand in Driving Fit Universal Car Hypersonic

  • ...iver you need to know where is the corner of your car, with the antenna you can see how close you're from other car..
  • 【Durable Antenna Pole】The corner antenna pole is made from Stainless Steel and the base is made from Plastic. The safety guard pole fits universal car, you can install the car antenna on the bumper which is horizontal mounting area..
  • 【Prevent Scratches Collision】If you are not tall, maybe you can't see the passenger side corner from the driver's seat, but with this genius antenna you can see where the corner is located. Vehicle bumper pole is adjustable. It is enough that you can see the top of it from the inside of your car. But the top is no light and no reflective in the dark..
  • 【Adjustable Bumper Pole】The length of the marker is from 11 inches to 23 inches, there is adjustable angle in the bottom of the pole. The pole of the car protector can be folded up for car washes..
  • 【Warm Notes】Before installation please clean the mounting area correctly, after installation please don't remove the bumper guard pole and the car within 24 hours, also please do not wash the car on the same day. Please make sure that your installation is correct, otherwise the vehicle antenna may fall..
Check Stock

Juegoal Rear Bumper Protector, Vehicles Bumper Guard Hitch Step with Pin Lock and Stabilizer for Car and SUV

  • Universal: Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch. (Bonus Pin Lock and Stabilizer which are value $8) Can be used as a step to reach the roof of the vehicle or to defend the bumper against rear end accidents, dents and scratches..
  • Useful Essential: Juegoal rear bumper guard is great option worth the buck, it is quite convenient for use at the parking area. It does not eat up extra space by protruding above the bumper..
  • Solid Construction: The premium quality material used in the construction further makes it extremely durable and sufficiently long-lasting. Of course, it offers all-weather protection for your car's bumper..
  • Convenient Size: This rear bumper guard comes in a convenient size which allows it to occupy the entire rear section of the bumper securing it from any form of scratches or damages. It does not sag, curl, flip or bend regardless of the pressure or impact it is subjected to..
  • With impact absorption zones, it eliminates chances of damage to the car's bumper. In case a taller vehicle backs into your car, you won't have to worry since this bumper guard is specially designed to take care of that..
Check Stock

Hypersonic Corner Antenna Bumper Pole Safety Guard For Universal Car Van

  • Antenna bumper pole is best gift for new drivers. As a new driver you need it to measure the close from other car..
  • Adjustable and fordable driving and parking marker pole, you may stick on the bumper. The pole is made from Stainless Steel and madi in Taiwan..
  • Silver expendable antenna pole from 10in - 18in. The pole can be easily removed when you washing the car, but don't remove the base from your car, unless you will no longer use it.
  • Some position may not seeing the pole from driving seat, so please sitting in the car to find the best angle also it need someone to help you to install.
  • This product is very useful for the green hand in driving. Before installation please clean the surface first, after installation please don't remove the bumper guard pole and don't wash the car within 24 hours.
Check Stock

T-Rex Bumper Protector, Rear Bumper Guard for Cars

  • Universal fit: this bumper guard fits any car small and large.
  • Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings dents and scratches when you park the car.
  • Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in a breath.
  • 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners.
  • Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps. Works the same with or without the side straps.
Check Stock

Gseigvee 2 PCS Black Anti-Collision Patch Bumper Guard Strip Anti-Scratch Bumper Protector Trim Universal for Cars SUV Pickup Truck

  • Rubber Material: The car bumper protection strip is made of high-quality rubber and is attached with a strong adhesive. Please clean the surface before use, press for a few minutes after heating, which can effectively extend the service life..
  • Perfect Protection: The rubber strips for car bumpers are flexible to install and avoid the car to wear and tear, scratches paint scratches, collision. Heat and cold resistance and waterproof. When removing the strips, it wouldn’t take pint off..
  • Scope of Application: The car bumper guard protector is suitable for general vehicles, such as suvs, trucks, and pickups. Before ordering, please carefully check the size of the product (27*3CM)..
  • Easy to Install: Avoid sticking to exposed environments, wipe the car in advance and keep it dry, otherwise it will fall off easily. Do not wash and wipe the car within 48 hours after installing. Otherwise, it will fall easily. You can stick the side bumper guards on any place of your car like the front bumper, rear bumper, door guard and corner..
  • Package Content: 2 pcs Car Bumper Corner Rubber Strips. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays..
Check Stock

Universal Car Bumper Protector Rubber, Anti-Collision Front and Rear Rubber Strips for Car Bumpers Side, Not Easy to Fall Bumper Protector Trim Guard Strip for Sedan SUV MPV Pickup Truck (8 Pcs)

  • 【Upgrade glue】This car bumper protector rubber uses upgraded double-sided 3M glue that won't fall easily and can be firmly adhered to your car.【Notice!】Clean the car surface before using the rubber strips, and the surface do not touch water within 24hrs after sticking for better product experience!.
  • 【Comprehensive protection】This bumper guard strip can be glued to the front and rear bumpers and front and rear doors of the car. This bumper protector trim for car effectively protects your car from scratches and scratches..
  • 【Easy to install】 This universal bumper guard protector car can be used immediately after tearing off the protective film on the surface. The rubber strips for car bumper takes up a small space and can be easily stored. Product size: 10.7inch * 1.25inch.
  • 【Soft material】 This car anti-collision strip is made of high quality soft material, which has good flexibility and durability without hurting the paint. This car bumper protector front and back can protect and decorate the car..
  • 【Compatible with multiple models】 The package includes 4 anti-collision bumper protector, and is suitable for various models of Sedan,SUV,MPV,Pickup,Truck. We provide one year of quality support for this front and rear bumper protector. I....
Check Stock

Steel Front Bumper Compatible with 2010-2018 Dodge Ram 2500 3500 Off-Road Mesh Design w/18W LED Lights Retains Factory Tow Hooks (2 Shipping Boxes)

  • 【Fitment】: The steel upgrade front bumper is compatible with 2010-2018 Dodge Ram 2500 3500. Your order will be delivered by 2 boxes..
  • 【Material】: This bumper guard is make by high quality steel, solid and durable, can better protect the front..
  • 【Surface】: The steel front bumper is overall covered by black powder coating which helps the bumper keep away from the water and oxygen. As a result, the bumper will have longer lifespans..
  • 【Installation】: 3-pieces design, bolt-on installation with accompanying hardware and instruction..
  • 【Function】: Mesh screen allows maximum air flow to radiator area. The aggressive design and the use of high-quality steel make the bumper effectively protect the car’s front head and air intake grille meanwhile improve the appearance. 18W LED Lights provide a comfortable driving environment.
Check Stock

SLIPLO Ultra Universal Front Bumper Scrape Guard Skid Plate Bumper Protection for Lowered Cars, Carbon Fiber Splitters and Aftermarket Bumper Lips, Anti-Scratch DIY Bumper Protector Kit v2

  • ✅【 ULTIMATE PROTECTION 】SLIPLO ULTRA version 2 car bumper protector kit provides unmatched anti-scratch protection for your car’s front bumper, lip, spoiler and splitter from scratches, scrapes, or scuffs caused by steep driveways, speed bumps, parking curbs, and potholes. It’ll effectively withstand car washes, high speeds, and any temperature you put it through. Reduces contact surface area of your bumper by around 50% helping to minimize abrasion during impact..
  • ✅【 UPGRADED NEW VERSION 2 】In this upgraded version of our high-performance bumper scrape guard, we have made additional enhancements, on top of all the high features of the previous version to improve the ease of installation, effectiveness and performance of this universal bumper protector, which will give you a more pleasing and satisfying experience..
  • ✅【 ENHANCED DESIGN 】 Features a newly modified size and thickness of our front splitter protector for easier & more effective installation, it will minimize the trimming of each piece and will reduces the chance of adhesive failure with extreme compound curves. It will also allow for a discreet lower-profile factory look while providing the same level of protection as our previous model..
Check Stock