Reviews Car Amplifier Capacitors

Four Channel Ground Loop Isolator Audio Noise Filter 4 RCA AP3054

Reduces High Pitched Whine Alternator Noise caused by the car's electrical system.
Always Use High Quality RCA Cables for your Audio System.
Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap.

Reduces High Pitched Whine Alternator Noise caused by the car's electrical system.
Always Use High Quality RCA Cables for your Audio System.
Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap.

Reduces High Pitched Whine Alternator Noise caused by the car's electrical system.
Always Use High Quality RCA Cables for your Audio System.
Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap.

The new Rega Fono MM phono stage has been designed to be effective, easy to use, and above all, to reproduce music..
The Fono MM uses a fully discrete, cascaded, complementary amplifier input stage, a configuration designed to optimise the performance of your moving magnet cartridge..
The RIAA equalization has been split into two stages to minimise interaction. Polyester capacitors have been used in the signal path and polypropylene capacitors are used in the RIAA equalization circuits..
The aesthetic design of the Fono MM was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MC amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers..
Input sensitivity = 1.7mV for 200mV output, Input loading = 47KΩ in parallel with 100pF, Maximum input level = 60mV at 1KHz, Recommended minimum output load resistance = 5KΩ.

Metal brushed body, fast heat dissipation, does not affect the sound quality..
Built-in powerful electric circulating coil ensures sufficient power when operating, and is safer, more efficient and more stable..
The two-color coil transformer is small in size, high in power, rejects all short circuits, and improves the usage rate of the PCB..
1500W high power car amplifier, 360° stereo surround sound..
Black capacitors, mellow tone, increase the musical performance of the equipment, greatly improving the overall sound..

Rockville RXD-F30 Micro Car/ATV Amplifier 2400w Peak 4 Channel 4x150W Dyno-Certified RMS..
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford....
Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). .....2400 Watts (2 x 1200 @ 2 Ohms or 1 x 2400 @ 4....
Fully Adjustable High Pass Crossover: 50Hz - 250Hz. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz.
Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp....

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
129 square inches of sound radiating surface on both the front and back.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-300 watts per channel.
Dimensions: 52.1" high, 9" wide, 16.3" deep.

L-C-R soundbar, Slim design, Binding Posts: Push style.
High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
Frequency Response: 120–23,000 Hz ± 3 dB.
Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".

Adopt 6N8P tube for pre-amp making voice sweet and exquisite..
Using 6N5P tube for buffer to bring soft and charming sound..
The Line Out can be used as Pre-amplifier： It has one line output, through the tube, and controlled by volume. It can be used as the Pre- amplifier of all kinds of audio amplifier or active speaker, and improve the sound quality of audio amplifier or active speaker..
Professional Resistances and Capacitors ；Gold-plated RCA port for amplifiers or active speakers..
Aluminum alloy shell sandblasted texture panel ：Sandblasted texture panel and solid aluminum alloy case are high end atmosphere, and can effectively resist external interference..

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.