Reviews Capacitor Testing Meter

East Tester Desktop LCR Meter inductance Tester 10~100KHz Continuously Adjustable; 1Hz Step; Support SCPI; (4510, Grey, 3)

  • Lcr meter benchtop Testing frequency 100khz.
  • Capacitance meter capacitor tester Basic accuracy:0.1%.
  • Capacitance clamp meter Interfaces: standard: RS232.
  • Inductance meter tester Support dc resistance (DCR).
  • Inductance meter benchelectrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional.
Check Stock

Fluke 1503 Insulation Resistance Tester

  • 【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA.
  • compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty.
  • 【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components.
  • 【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test.
  • Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds.
  • Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters.
  • 【WIDE RANGE IN-CIRCUIT ESR & DCR TESTING】 Tester meter measures ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit.
  • 【EASY TO USE, PORTABLE, AND RUGGED DESIGN】 Easy One-Handed Tweezers with gold plated tips and extra-long cable.
  • Non polarity dependent test probe, eliminates the need for polarity checking.
Check Stock

Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor / Low Ohm Meter Up to 0.01 to 100R, Support in Circuit Testing

  • Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer..
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check..
  • Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing..
  • Auto-ranging capacitor ESR and Low Ohm Meter..
Check Stock

Capacitor Tester, Capacitance Meter, Portable Capacimeter, LCD Digital for Measuring for Test

  • It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C)..
  • The impedance become small, and we can then measure the true series resistor value..
  • Using this theory, we can measure the capacitor is bad/ damaged or good in condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repag TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not..
Check Stock

HONEYTEK A6243L Digital Inductance Meter Electronic Capacitance Tester Inductance/Capacitor Test Table

  • 【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA.
  • compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty.
  • 【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components.
  • 【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test.
  • Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds.
  • Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters.
  • 【WIDE RANGE IN-CIRCUIT ESR & DCR TESTING】 Tester meter measures ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit.
  • 【EASY TO USE, PORTABLE, AND RUGGED DESIGN】 Easy One-Handed Tweezers with gold plated tips and extra-long cable.
  • Non polarity dependent test probe, eliminates the need for polarity checking.
Check Stock

Measuring Resistance,MESR-100 ESR Capacitor Tester Ohm Meter Professional Measuring Internal Resistance of Capacitor Capacitance Circuit Tester Capacitor Meter with SMD Test Clip

  • It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C)..
  • The impedance become small, and we can then measure the true series resistor value..
  • Using this theory, we can measure the capacitor is bad/ damaged or good in condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not..
Check Stock

Capacitance Meter Capacitor Tester Capacitance Resistance Meters Ohmmeters Resistor LCR Meter Measures AC/DC Current Capacitance Frequency Diode Test Continuity Test Temperature (UT601)

  • ☛ WIDE APPLICATION---With a broad capacitance measurement range and precise accuracy, the capacitance meter capacitor tester can measure resistance, transistor, diode and continuity buzzer.
  • ☛ LARGE DISPLAYING SCREEN---With large displaying screen, the capacitance meter capacitor tester allows you to read clearly and easily, convenient to read.
  • ☛ RANGE SWITCH---The range switch enables you to choose related resistance, capacitance and inductance to measure, according to your relative data, easy to operate.
  • ☛ SAFE TO OPERATE---Adopting durable insulating cover, the capacitance meter capacitor tester is safe to operate. Accurate and clear test port will simply your process.
  • ☛ LOW BATTERY INDICATION---The capacitance meter capacitor can be used in measuring the circuit designed capacitance of cable, switch and PCB layout. Diode and buzzer continuity measurements, inductance measurement, low battery indication.
Check Stock

GOLDCHAMP Digital Multimeter Capacitance Meter 200pF-20mF Meter Capacitor Handheld Multimeter Tester with Multi Testers Manual Range Measure Tool, Back Light, Data Hold

  • 【Capacitance Meter】This is professional multimeter only for capacitor testing meter, the Capacitance Range: 200pF/2000pF/20nF/200nF/2uF/20uF/200uF (Accuracy: ±0.5% ).
  • 【Easy Operation】With easy ZERO setting, Back light, Data-Hold, this is a widely used multimeter tool for home, school, home electrical repair..
  • 【LCD Display High Accurate】Large LCD screen for easy reading. High accurate 1999 counts and low power consumption, powered by 9V battery ..
  • 【Electrical Necessity 】Foldable Stand on Back, compact size and lightweight, easy to carry anywhere, it is electrical engneering necessity in pack..
  • 【Widely Capacitance Range】It can be used in selecting capacitance, measuring unknown capacitance. Matching capacitance, and measuring the capacitance of cable, switch and PCB electrocircuit..
Check Stock

DLG Clamp On Ground Earth Resistance Tester With USB Connection DI-120

  • 5 Digit reading: This M6013 Capacitance with new large 128*64 LCD, can display 5 digit reading..
  • Large measuring range: Larger measuring range, V2 can read up to 470mF..
  • Stable: The M6013 Capacitor Meter more stable on reading, (with auto running averaging function, can read pF more stable and accuracy)..
  • Efficient: Reading a 2200uF capacitance only takes ~0.2s..
  • Tips: The M6013 capacitor meter can use mirco USB as external power.Suitable for DIY user and professional engineer usage..
Check Stock

BTMETER AC/DC 1000A Clamp Multimeter, 4000 Counts Digital Clamp-on Meter with Data Logging Measure Amp Volt Ohm Capacitance Frequency Temperature Continuity, Electrical Tester 570T-APP

  • ⚡【DC AC Current Clamp Multimeter】This multifuctional clamp-on meter can accurately measures AC DC current with 400A/1000A ranges, 100mA/1A resolution；AC and DC Voltage to 1000V, Resistance to 60M ohms.
  • Temperarture -4~1832℉ (℃/℉ Optional), Test voltage 4V, can measure light-emitting diodes, and continuity test..
  • ⚡【Sensitive Hall Effect Clamp Sensor】Engineered with hall effect sensor to ensure high precision measurement on DC/AC amperage testing. Built with big jaw caliber size 1.77 inches (45mm), allows you non-contact measuring multiple wires at the same time. ❗Please separate the hot and neutral conductors or they will cancel each other out and give zero amp reading, just clamp on the LIVE line for accurate amperage testing❗.
  • ⚡【Electrical Data Logger】Get rid of hand-written notes or complicated maths. With this intelligent clamp amp meter, all electric measurements will be displayed on your phone or tablet, auto graph a trend chart, support to sharing out in Excel, TXT format. This clamp-on ammeter is reliable on remotely troubleshoot electrical problems in HVAC, household, commercial,....
Check Stock