Reviews Capacitance Discharge Spot Welder

Spot Welder with Soldering Iron, 11000mAh Soldering Iron Kit Electronics, Adjustable Temperature Welding Tool, Portable Spot Welding Equipment for DIY 18650 Battery, Soldering Iron Stand

  • ...s that can be adjusted. Different gears are used for different materials. The spot welding materials can be nickel, iron, stainless steel, aluminum, etc. 0.1-0.2 mm in thickness material..
  • ✔Large Capacity - The spot welder has a large capacity of 11000 mAh, built-in rechargeable 2 electric power lithium batteries, discharge current 003e650A, environmentally friendly. Type-C 2A input, it can be fully charged in about 3 hours. We can also use it to charge our other devices..
  • ✔Protection Measures - The portable spot welder with soldering iron has perfect overcharge and over temperature protection functions. Its unique overheating protection device automatically cuts off the power when overheating occurs, and it will automatically shut down without any operation for 8 minutes, allowing you to use it more safely..
  • ✔Beautiful design: The output temperature range of the electric soldering iron is 0-788 degrees Fahrenheit, it heats up quickly, melts tin in one second, and can be operated with one hand..
  • ✔Abundant equipment: electric welding host, electric soldering pen, electric soldering pen, Type-C charging cable, 5M nickel sheet, electric soldering iron holder, replace the iron tip..
Check Stock

Spot Welder, Seesii 11000mA-h Battery Spot Welder with LCD Screen Upgraded Enhanced 80 Gears Adjustable Portable Mini Spot Welder with 2x5M Nickel Sheet & 4X4 Holder For Making Battery Packs

  • ✅【Upgraded Enhanced Battery Spot Welder】: This mini spot welder enhances the battery energy storage capacity to 11000mAh, power-bank design, with type-C charging cable,can be fully charged within 3-5 hours,and it can continuously weld thousands of points after being fully charged.Most importantly, the upgraded spot welder can easily weld 0.1-0.15mm thick nickel sheets, which can help you make a perfect battery packs,(Note:Cannot weld nickel strips with a thickness of 0.2mm)..
  • ✅【80 Levels of Adjustable Output】: Our Seesii spot welder SE-002 with 80 levels output power adjustable,it can be adjusted 1-8 and 1.1-5.4-8.0 levels according to your different needs,very fine adjustments can make the welding more precise and the spot welding effect more perfect.If you are a new learner you can adjust the delay time to delay the automatic weld time( 1-5s）, it’s very friendly for the beginner..
  • ✅【LCD Visible Screen Display】: Our spot welder for battery is 2022 newly designed with visible colorful LCD Screen, can clearly know the remaining battery, delay time, temperature and gear level of the spot welder.The working condition of the product can be understo....
Check Stock

Spot Welder, 11000mAh Battery Spot Welder with LCD Screen Upgraded 80 Gears Adjustable Portable Mini Spot Welder for Battery Plate Welding with Long Spot Welding Pen & 5M Nickel Strip

  • ✅【UPGRADE ENHANCED BATTERY SPOT WELDER】This mini battery spot welder increases the energy storage capacity of the battery to 11000mah. The spot welder is designed with a C-type charging cable, which can be fully charged within 3-5 hours and can continuously weld thousands of fully charged points. The most important thing is that the upgraded spot welder can easily weld nickel/iron/steel sheets with a thickness of 0.1-0.2mm..
  • 【UPGRADED LCD VISUAL SCREEN DESIGN】Our DIY spot welding machine was newly designed in 2023. With a visible color LCD screen, you can understand the remaining power, delay time, temperature and gear of the spot welding machine. You can know all the working states of mini spot welder at a glance through the screen, making your spot welding work easier and safer..
  • ✅【80 LEVEL ADJUSTABLE OUTPUT】Our small spot welder has 80 level adjustable output power, which can be adjusted to 1-7 and 1.1-5.4-8.0 levels according to your different needs. Fine adjustment can make the welding more accurate and the spot welding effect more perfect. If you are a beginner, you can adjust the delay time to delay the automatic welding time (1-5s), which is ....
Check Stock

CNCEST Jewelry Spot Welding Machine 110V 80A Spot Welder with Foot Pedal for Jewelry Gold Silver Platinum

  • Specification: Item name: 80A spot welder.
  • Work Principle: Jewelry Spot Welding Machine Using the principle of plasma high-frequency discharge, a molten pool is immediately formed in the metal....
  • Efficient Welding: Spot Welding Machine output power can be adjusted according to the size of the welding wire, the welding workpiece is smooth, fast....
  • Widely Use: This spot welding machine is mainly used for welding various buckles such as gold, silver necklaces, earrings, etc. It is not suitable for....
  • Packages: 1 x Main Unit, 1 x Power Cord, 1 x Foot Pedal, 1 x Set Accessories, 1 x Manual.
Check Stock

Battery Spot Welder, Faiuot 11.6 KW Capacitor Energy Storage Pulse Welding Machine, Portable Precision Spot Welding Equipment with 70A Welding Pen for Battery Pack Building

  • 【Upgraded Capacitor Energy Storage Spot Welder】The newly designed battery spot welder is equipped with two super capacitors for energy storage and power supply for pulse welding. Compared to a traditional AC spot welder, it does not interfere with the electric circuit, which means no more tripping problems..
  • 【Smart Panel & Multifunction】Equipped with intelligent display control panel, the output voltage can be flexibly adjusted according to the thickness of different weldments, with induction spot welding and quick-plug spot welding pen connection sockets, a series of spot welding pens can be selected according to different welding needs, so as to achieve fast Spot welding to improve work efficiency..
  • 【Efficiency & Large Capacity】 The machine’s super energy-gathered pulse technology combines with a max welding power of 11.6 KW to provide a reliable welding effect. With 1-199V voltage detection function, it can quickly detect the voltage value of the welding battery. Capacitors have the long lasting work time and large capacity, enabling low-efficiency and high-output battery life..
  • 【70A Welding Pen & Automatic Mode】 Equipped with the 70A separated-style spot welding pen and ‘AT’ automatic welding mode, this machine allows you to wo....
Check Stock

5000W Handheld Spot Welder, Docreate Portable Spot Welder Machine DIY Kit for 18650 Battery Pack Welding Tools, Adjustable Battery Welding Soldering Machine with Nickel Strip and Spot Welding Pen

  • ...machine is good performance and long service life. Which is ABS shell material, surface anodizing technology, anti-abrasive and safe to use. The spot welding machine is come with welding pen with good conductivity and low contact resistance..
  • Portable Design:This mini spot welder equipment is Portable and lightweight, space-saving in home, and you can transport your spot welder to different job locations easily and quickly..
  • High-Efficiency: The adjustable spot welder can weld thousands of points continuously on nickel sheet after full charge,the solder pins of the adjustable spot welding machine can be removed and replaced, easy installation and operation..
  • Easy to Operate: The DIY battery spot welder machine is foot switch controls welding, spot welding is more arbitrary. Just press the nickel belt with two soldering pens and step on the foot switch. Wait for about 0.5 seconds for output spot welding,then release the foot switch.suitable for precise welding..
  • Wide Application & Warranty: The spot welder with large output power can be used to connect nickel strips of 18650 li....
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 9 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
  • 【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
  • 【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5000mAh for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
  • 【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
Check Stock

Spot Welder With Clear LCD Screen Faiuot Upgraded 10000mAh Portable 30 Gear Adjustable Spot Welder Machine Spot Welding Equipment Energy Storage for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include welding gears, welding delay and pulse number on the OLED display of the welding machine, also with the real-time temperature clearly..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 0.1-0.15mm thick nickel strip, ultra-low internal resistance, increased over current capacity..
  • 【10000mAh Battery & Power Bank Function】With 10000mAh battery, this mini spot welder can be fully charged within 3 hours. It can continuously weld thousands of points after being fully charged with max output 800A. And it can be also used as power bank when you need to charge..
  • 【40cm Welding Pen & 30 Gears Adjustable】 The spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 70-speed output power adjustable, welding is more precise and the w....
Check Stock