Reviews Can bus Ii Connector

Dell - Dell Dimension E521 System Board

  • ...rst, eight-way set associative, write-back SRAM..
  • System Information: System chip set: Intel 865G. DMA channels: four. Interrupt levels: 24 APIC mode. System BIOS chip: 4 Mb (512 KB). System clock: 533- or 800-MHz quad-data rate..
  • Expansion Bus: Bus types: PCI and AGP. Bus speed: PCI: 33 MHz. AGP: AGP 1X, 4X, 8X. AGP connector: one low profile. AGP connector size: 172 pins. AGP connector data width (maximum): 32 bits. AGP video bus protocols: 4x mode at 1.5 V. PCI connectors: one low profile. PCI connector size: 120 pins. PCI connector data width (maximum): 32 bits..
  • Memory: Architecture: DDR SDRAM. Memory connectors: two. Memory capacities: 128-, 256-, 512-MB, and 1-GB non-ECC DDR SDRAM. Minimum memory: 256 MB. Maximum memory: 2 GB. Memory type: 333-MHz DDR SDRAM (non-ECC). NOTE: DDR 333 memory performs at 266 MHz on 400 front- side bus processors..
  • Drives: Externally accessible: one slimline optical bay. one slimline 3.5-inch bay. Internally accessible: one bay for 1-inch high IDE hard drive..
Check Stock

Car Bluetooth Adapter, Bluetooth Wireless AUX Adapter Car for Audio Stereo Module for IP-Bus

  • ※ Compatible: Car Bluetooth adapter is suitable for DEH-P 2500 R, suitable for DEH-P 2600 R, suitable for DEH-P 3500 MP, suitable for DEH-P 6600 R, suitable for DEH-P 9600 MP, suitable for DEH-P 3100 UB, suitable for DEH -P 4100 SD, suitable for DEH-P 5100 UB, suitable for DEH-P 7100 BT, suitable for DEH-P 8100 BT, suitable for DEH-P88RS-II, suitable for DEH-P88RS. Bluetooth module specially designed for Pioneer IP-BUS port..
  • ※ After-sales service: Our Bluetooth adapter has been tested before leaving the factory. If you encounter any questions during use or installation, please contact us in time and we will serve you 24 hours.
  • ※ Installation method: Just connect the 12-pin connector on the back of the radio. Just plug it into the back of the radio and connect the red to 12V + and the black to 12V-..
  • ※ Support music playback: Select Aux from the radio, you can use your phone to play music through car speakers. You can listen to music on your phone, tablet and mp3 (must have Bluetooth)..
  • ※ High-quality materials: The car Bluetooth adapter uses high-quality ABS material. ABS has the characteristics of anti-corrosion and durability..
Check Stock

OBD-II Breakout Diagnostic Box, OBD2 Pinout Tester Detector

  • The OBD-II breakout box with male and female header connectors, so that this breakout box can be placed between the vehicle and the diagnosis tool. Very handy if you want to measure CAN bus signals..
  • To provide quick access to all 16 pin connections during repair and diagnosis of the vehicle..
  • OBD-II breakout header cable length 420mm/16", to facilitate plugging in equipment..
  • Standard 4mm banana sockets. The five color sockets correspond to different pinouts, which is convenient for you to identify pinouts with different functions..
Check Stock

Mainboard LGA 1155 DDR3 Computer Motherboard Computer Motherboard, for for B75

  • CPU AM3+ Socket: 1.Support for AMD AM3+ processor 2.Support for AMD AM3 Phenom II processor / AMD Athlon II processor Hyper Transport Bus 1.4400 MT/s Chipset 1.North Bridge: AMD 760G 2.South Bridge: AMD SB710 Memory 1.4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory 2.Dual channel memory architecture 3.Support for 1333+ (O.C....
Check Stock

Pulse Power Plug Pigtail Connector, Pulse Bar Connectors with Seat Belt Bypass Replacement for Polaris 2018-2021 Ranger XP 1000/ RZR RS1 Pro/General 14 Ga Wire Accessory Plug Black Blue Red 6 Pack

  • 【FIT VEHICLES】➤➤Replacement for 18 19 20 21 ranger XP 1000 pulse power plug pigtail connector, 18 19 20 21 RZR RS1/Pro pulse bar connectors, 19 20 21 22 General 1000 pulse power plug connector with seat belt bypass.
  • 【APPLICATION】➤➤Are you troubled by adding accessories, this pulse connector is specially designed for you. It is used in many ways: adding LED lights and bar、adding a heater、adding a power source、adding an aux, making adding an accessory easily.
  • 【EASY TO INSTALL】➤➤Easy installation, plug and play. The bus bar plugs is very simple to isntall. Black wire is : for ground.
  • Red wire is : for constant power. Seat Belt Bypass: Unplug the old harness and clip in the new harness. Direct replacement for 2018-2021 Ranger XP 1000 / RZR RS1 Pro / General bus bar pigtail. A nice solution for wiring accessories.
  • 【PREMIUM QUALITY】➤➤Made of high quality materials, the plug and play pigtails has good toughness and more durable , making it last for a longtime. With a strict sealing process and insulating material case, the pulse bar connector is waterproof, dust-proof and high temperature resistance.
  • 【SATISFACTION GUARANTEE】➤➤Order from Heiher, you will get 6 × pigtail connecto....
Check Stock

OLLGEN 3M/9.8ft Car OBDII Vehicle ECU Emergency Power Supply Cable Car Memory Save Any 12V DC Power Source OBD Male Connector Cable Adapter

  • Cigarette Lighter to OBD2 16 Pin Male Connector Power Cable : This 3m/9.8ft cable is 12V in Male OBD out adapter you can use it to connect to an OBD II in a car..
  • Interface connector between a 12V DC power source and vehicle's OBD II port :Compatible all OBD2 diagnostic tools with a 16 pin socket ..
  • Powered up OBD2 device : This Cigarette lighter to OBD2 16pin male power cable can preserve vehicle codes and electronic presets , and it also can save you radio information.This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery or another car’s DC 12V power outlet..
  • Compatible with most of OBD II Memory Saver (or Automotive Computer Memory Saver) in Current Market : Use this to power your HUD without having to plug into OBD port (the HUD usually plugs into the OBD port for power). Use this cable to power any OBD port powered devices that don't need to talk to the car..
  • Great Product :High-quality materials can make the cable Sturdy and flexible..
Check Stock

OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable

  • Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet..
  • Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
  • 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one..
  • Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required t....
Check Stock

Xiwai SD Male Extender to SD Card Female Extension Cable Adapter Flexible SD/SDHC/SDXC UHS-III UHS-3

  • SD Male Extender to SD Card Female Extension Cable Adapter Flexible SD/SDHC/SDXC UHS-III UHS-3.
  • Length: 100mm approx. included connector..
  • Support UHS-I (full speed Up to 104MB/Sec) (High speed 52MB/Sec) Support UHS-II UHS-III (full speed Up To 321MB/Sec ).
  • Application: GPS , ROCK Pi 4 raspberry Pi SCM development board, Machine equipment and other needs to extend the SD card to the use UHS-II Extender cable..
  • Test: UHS-II SD card 270MB/s , test speed 250MB/s Connector: SD Male to SD Female..
Check Stock

Creator 20PIN OBD1 to 16PIN OBD2 Connector Adapter Cable Compatible for BMW E31 E32 E34 E36

  • Works on All BMW with 20 PIN Diagnostic Connector.
  • Connector: Compatible for BMW 20Pins male connector, OBDII 16pins female connector.
  • It is only one piece of BMW 20PIN Connector adapter cable in the package, this cable can works with creator c110 or c310 BMW scanner for scanning old....
  • 20Pin to OBD II 16Pin connector cable could connect the BMW to the car reader for car inspection.
  • Note: The item is just an adapter, NOT a scanner. Package included: 1* 20Pin to 16Pin OBD2 Adapter.
Check Stock

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock