Reviews Can Ethernet Module Board

Dell PowerEdge M1000e H330H Blank Insert Module

  • Resilient HA stacking with up to 6 switches (only SFP+ ports can be used for stack connections).
  • Up to 24 auto-sensing 1/10Gb Ethernet switching ports available.
  • 16 internal server 10Gb (KR) Ethernet ports with auto-negotiation capability to 1Gb Ethernet.
  • 4 external integrated 1/10Gb SFP+ Ethernet ports.
  • Flexible media choices for up to 4 additional 1/10Gb uplink ports with one optional FlexIO Module: 4-port SFP+ 10GbE module 3-port CX-4 10GbE copper module (supports 10Gb connections only) 2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).
Check Stock

Atomic Pi Developers Kit

  • Powerful Atom quad-core processor with 2Gb ram and 16GB Flash on board.
  • Developer kit includes large breakout board and AI camera module.
  • Gigabit Ethernet, AC WiFi, Bluetooth, Hi Performance Audio, USB-2, USB-3, SD, GPIO.
  • Peripherals include 9-axis sensor, bluetooth and XMOS audio power-amp.
  • Boots Linux right out of the box. What will you make with it?.
Check Stock

Waveshare Mini-Computer Add-ons Based on Raspberry Pi Compute Module CM3 / CM3L / CM3+ / CM3+L Comes with PoE Expansion Board

  • The Add-Ons Include: Expansion Board, Metal Case, Power Supply, And Cooling Fan. Easily Make A Mini-Computer If You Happen To Get A Compute Module.
  • Compute Module PoE Board: Dual CSI Camera Ports, PoE (Power Over Ethernet) Feature, Versatile Peripheral Interfaces.
  • Ingenious Cut-Out, Highly Matching The Master Board, Along With Clear Labels, Easy To Use.
  • Comes With Cooling Fan, Allows Being Controlled By Software Via GPIO, Or Being Powered Directly From 5V Supply.
  • Smooth And Clean Metal Bottom Surface, With Mounting Holes On Both Sides, Suitable For Industrial Applications.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Waveshare Mini Base Board (A) Designed for Raspberry Pi Compute Module 4 Suitable for Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

  • Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the raspberry pi CM4 or being integrated into end products.
  • Compared with version B, there're NO RTC, Fan controller, and battery holder on version A, which is more cost effective.
  • Standard Raspberry Pi CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • Onboard multiple connectors including: CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot.
  • Comes with mounting screw, easy to install. When using the M.2 interface, please use the matching screws..
Check Stock

Geekworm KVM-A3 Kit with Raspberry Pi 4 Case Compatible with PiKVM ATX HDMI CSI for Raspberry Pi 4 Model B Only(Not Include Raspberry Pi)

  • 【What is it】This kit allows user to realize a PiKVM / KVM project with raspberry pi 4 which can control a computer using a web browser!.
  • 【Compatiblity】for use with Raspberry Pi 4 Model B 8GB / 4GB / 2GB / 1GB only, the metal case only support Raspberry Pi 4..
  • 【Function】Remotely turn on/ turn off / restart your computer.
  • reinstall the OS using the Virtual CD-ROM or Flash Drive.
  • Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
  • 【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
  • Power Via USB Type-C port of X630-A3. (DON'T power via Raspberry Pi's TYPE-C port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
  • 【Cooling Solution】X630-A3 with a on-board 3007 cooling fan for heat dissaption of Pi4.
  • 【What Included】1 x KWM-A3 Metal Case with Accessories, 1 x X630-A3 V1.2 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
  • 【Extra Needed】Raspberry Pi 4, TF Card, HDMI Cable, Power Adapter.
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

Ethernet Splitter [Paired Use Only] Network Cable Y Division Adapter LAN Cord 1to2 Port Separator Internet line Segregator 1 to 2 Way Hub Connector for RJ45 Cat5/Cat5e/Cat6/Cat6a/Cat6e/Cat7 [2-Pack]

  • Please NOTE: Equipped with a 1.2m/4ft USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection..
  • Ethernet Splitter 1 to 2: This RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously..
  • Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 100Mbps.And the signal transmission of two cable groups will not interfere with each other..
  • Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use..
  • Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible wi....
Check Stock

BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer

  • A combination of duet3 mini5 + and Mini 2 +, for Mini 12864 LCD or 5i Smart Disply screen. For Vorn printer. Max input 28V. The firmware has been burned, only need to Set up your printer and update the firmware through the web interface. Support Wif and Ethernet by replacing the module for the switching. Supports external antenna..
  • Its main control chip and pin allocation are completely consistent with mini5 +. Based on same54p20 (arm cortex M4 @ 120mhz), it is fully compatible with duet3 mini5 +..
  • Upgrades on the power supply and IO protection, Input / output IO full with TVS protection, Automobile fuses( for hot bed input and main power input), all make it safer and more stable..
  • Size: 148.5 x 87mm. XH2.54 connectors, 7x PWM power MOSFET output, On board TF card slot, 2×4 row pin lead out for external SD card module, Type-C USB socket. Based on the good performance of RRF firmware and the on-board 7-axis (7pcs tmc2209 stepper motor driver), the board can be easily configured for a variety of models, such as Vorn series, multi z-axis models, dual x models, etc..
  • Package includes: BIG-DIPPER Motherboard x 1, Gray Cable x 1, External Antenn x 1, Heat Sinks x 7. If you have any questions, you can contact us via Amazon. We will help you to solve the proble....
Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

  • 【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
  • 【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
  • 【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
  • 【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
  • 【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
  • 【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.
Check Stock