Reviews Camera Tripod Heads

Neewer 12”×12”/30×30cm Photography Acrylic Display Boards, Non-Reflective and Reflective Black and White Square Photography Background Boards for Product Table Top Photography Shooting

  • This product is connected to a 3/8 screw detachable camera tripod.5 3/8" Mounting Heads, 2 Adjustable. As this cross arm is equipped with 3/8inch screw, ball head adapter (Not Included) will be needed in order to use with cameras.
  • The versatile swivel joint allows positioning at almost any angle also can DIY assembly by more combinations.
  • Cross Arm is a kind of double pan tilt head owning four extended arm,which can install four different direction,able to operate more camera at the same time and also can install the light..
  • NOTE：Tripod, Camera and Quick Release Plate are NOT included.Do not support plastic lightweight tripod, fit in detachable camera tripod.
Check Stock

FOTOBETTER Camera Tripod Boom Arm,Rotatable Multi-Angle Tripod Center Column Extension for Studio Outdoor Macro Over Head Shooting,5kg Load Capacity,25mm Tube,32cm Length (BA-25 Tripod Extender)

  • Compatibility and Application Tripod Boom Arm:Equipped with 1/4 and 3/8 screw, it is compatible with most ball heads, tripods and cameras. Extension Arm is compatible with all 3/8-inch interface tripod and you can attach 3/8-inch ball head or 1/4-inch camera on Extension Arm..
  • Horizontal and vertical rotatable,Multi-Angle Tripod Center Column: Horizontally 360 degrees rotatable while vertically 180 degrees rotatable.
  • It can hold your camera at your preferred height and angle to meet your need. Perfect for studio/outdoor macro shooting and low angle shooting..
  • Load-bearing capacity Tripod Extension Arm Tube: Sturdy aluminum construction and Spiral Knob Locking System can ensure 5 kilograms load capacity.
  • With a sand bag hook, it can bear up more to keep stable (Sandbag Not included).The maximum extension length of the center column is 330mm, 25mm diameter center column pipe.It weights only 465g..
  • Easy to use:Mount the base on a tripod and mount the camera or ball head on the side.The built-in bubble level allows you to adjust the angle precisely.The adopt spiral knob locking system makes operations easier and quicker..
  • Functions of BA-25 Tripod Boom Arm Center Column:ideal for shootings with the camera position outside of the tripod axis, e.g. from above,....
Check Stock

Wig Stand Tripod Mannequin Head Stand Metal Adjustable Heavy Duty Wig Head Stand for Canvas Block Head Cosmetology Hairdressing Training Doll Head and Styling Making Wigs with Smartphone Clamp Mount

  • Durable Metal: 100% Brand New Wig Stand Tripod, Made by High-Grade Metal, Not Easy to Corrode, Reliable Material & Stable Tripod Shape, Easy to Use and Move Around..
  • Adjustable Height: The Height of Retractable Wig Stand Can Adjust From 25’’ to 40’’, You Can Adjust The Height At Your Own Will, and Use It While Sitting or Standing..
  • 360° Rotation: This Wig Stand Has Solid Metal Head Ball Which is Sturdy and Durable, 360°Free Motion Design Makes it Easy and Convenient to Mount a Wig on Top,You Can Tilt The Wig in Different Directions, and Great for Teaching Demonstrations or Home Wig Making..
  • Fits to: Holds a Variety of Wig Heads with Open Bottoms, Will Fit for Most Training Heads, Canvas Block Head, Mannequin Head, Doll Head, Foam Head.Etc..
  • Wide Compatibility: Comes with a Cellphone Clamp Mount, Which Will with Standard 1/4" Screw Thread at the Bottom. Attachable to Any Regular Sized DSRL Camera, GoPro and Smartphone, It Turns Into a Mobile Phone or Camera Stand Tripod, Amazing!.
  • Package List: 1x Tripod, 1x Carry Bag, 1x Cell Phone Holder, 10x T pins, 2x C needles, 1x Weaving Cap, 1x 1/4" Screw..
Check Stock

Merkury Innovations Adjustable Tripod for Cameras and Camcorders, 360 Degree Trigger Handle, Lightweight Quick Setup Video and Photography Tripod, Extendable to 54',MI-TB254-101

  • QUICK SETUP AND RELEASE: The four-section column quick release leg lock system enables the tripod to adjust the working height from 20" to 54" in a few seconds..
  • LIGHTWEIGHT AND STURDY: Featuring a strong 4.4 lb load capacity, this adjustable tripod mount weighs just 2 lbs. 4 section aluminum legs, rubber grip, and carrying case make this the ideal compact tripod for travel and remote photography..
  • 360 DEGREE ROTATING HANDLE allows you to capture the perfect panorama every time. Keep your camera stable while extended to ensure you capture the perfect photo in every scene and photography condition. Designed for both left and right hand users..
  • 3-WAY PAN HEADS & LEVEL BUBBLE: This camera tripod with convenient handle and bubble leveler allows you to smoothly adjust for multiple angles. It supports 360 degree panoramic shooting, 90 degree vertical portrait and 135 degree up/down tilt shooting. Quick release plate allows quick set up, so you'll never miss the moment..
  • HIGH COMPATIBILITY FOR ALL CAMERAS: This universal tripod is compatible with most major film and digital camera brands for DSLR professional photography. Note- no cell phone attachment included.
Check Stock

2 Pieces 41 mm QR Release Plate Camera Tripod Ball Head Quick Release Plate Replacement Compatible with Ambico V-0552 V-0554, Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-tech V-40

  • Package content: 2 pieces of 41 mm black tripod quick release plates which are compatible with Ambico V-0550 V-0551 V-0552 V-0553 V-0554 (fluid type head only), Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-Tech V-40, and so on.
  • Good workmanship: the camera mount adapter plates are made of PVC material and the middle anti-twist locking screw is made of aluminum material.
  • The surface is finely oxidized to give it a long service life, so you can use these camera mount adapter with confidence.
  • Standard anti-twist locking screws: these ball head quick release plates are equipped with standard anti-twist locking screws which conform to international standards, compatible with the standard for camera tripod ball heads.
  • Easy to install and remove: the quick release plates can be fixed to the camera base, which can save your time and facilitate the installation and disassembling of the tripod, easy for you to use.
  • How to install: depending on the card position position of the Pan/ Tilt/ Zoom, you can insert the tripod quick release plates directly for installation.
  • The quick release plates have a slotted screw that you can tighten with your fingers or coins.
Check Stock

Endurax 74 Camera Tripod for Canon Nikon Sony, DSLR Tripod Stand Tall with Phone Mount and Carry Bag

  • STABILITY & IMPRESSIVE HEIGHT RANGE - Weighs 3.9 lbs. with a max load capacity of 17.6lbs.
  • Folding to desktop height of 20.4 inches and expanding to 74 inches in just seconds, this tripod for camera fully fits different user height ranges, making your photos more creative than ever..
  • 3-WAY PAN HEADS & LEVEL BUBBLE - Camera stand with a handy handle and bubble level allows to smoothly adjust and shoot from multiple angles with no boundaries for creativity. Tall tripod stand support 360° panoramic shooting, 90° vertical shooting. It comes with a standard 1/4 "quick release plate to help you quickly set up the device and never miss any short but wonderful moment..
  • EXCELLENT PERFORMANCE - High quality aluminum alloy material, sturdy structure, 5 sections leg design, flip lock knob and non-slip rubber foot, make this travel tripod rugged and durable, so you can shoot on any surface. The weight hook can hanging items provide greater stability..
  • Tripod For All Cameras & Phone/Tablet - The dslr tripod comes with a 1/4" quick release plate holds a smartphone as wide as 2.4 "-3.7" and a tablet as wide as 4.3 "-7.2". 1/4" Screw compatible with all cameras like Nikon d3500 Coolpix d5600 d750 d3200 d5100 d90 Canon eos rebel Sony a6000 etc..
Check Stock

VANGUARD QS-60S Quick Release Plate

  • Vanguard QS-60S Quick Release Plate - Vanguard 1 Year Limited Warranty.
  • Compatibility: VEO Tripod Heads, TBH, BBH, GH-200 & GH-300T Quick-Release Plates, Arca Compatible heads.
  • Dimensions: 1.31 x 2.37" / 3.33 x 6.02cm.
Check Stock

Neewer Camera Slider Support Arm Stabilizer, 2-Pack Adjustable Tripod Stability Arm for Increasing Stability in Aluminum Alloy, Extendable Poles for Camera Video Slider Rail with C Clamps and BallHead

  • 003cp003e【Increased Stability】 These two camera slider support arms can increase stability when using a slider on a single tripod—no need for a second tripod. Maximum load is up to 7kg/15.5lb.
  • 003cp003e【Extendable Slider Support Arm】 The slider support arm can be adjusted from 23.2”/59cm to 37.8”/96cm in length. Ideal for sliders of various sizes.
  • 003cp003e【Wide Compatibility with C Clamp】 The support arm is attached to your tripod with the C-clamp. The maximum adjustment width of the C-clamp is 2”/5.2cm. The clamp also has non-slip rubber padding to increase friction and prevent scratches on the tripod legs. Compatible with a wide range of tripods with thin or thick tripod legs.
  • 003cp003e【Quick Installation with Ball Heads】 There are two mini-sized ball heads on both ends for easy, time-saving multi-angle mounting.
  • 003cp003e【Easy to Carry】 The adjustment knob is designed to help you quickly adjust the length and securely lock the arm during shooting. The support arm can be stored in a tripod bag (with a storage length of only 23.2”/59cm) so it’s easy to take on your journey.
Check Stock

Gimbal Tripod Head for Camera,YELANGU Professional Heavy Metal 360 Panoramic Shooting Gimbal stabilizer for DSLR Camera with 1/4" 3/8" Quick Release Plate and Bubble Level, Up to 33lbs/15kg

  • ➤PRECISE POSITIONING: Gimbal stabilizer for dslr camera CNC rails allow for smooth movement, fast tracking horizontally and vertically.100mm movable horizontal axis,Tripod head camera horizontal adjustment of the lens platform allows precise positioning to find the center of gravity of any size lens and camera system.Calibrated scale for repeatable positioning of lenses..
  • ➤WIDELY COMPATIBLE: 3/8" Screw holes at the bottom of the Gimbal Head For Tripod, detachable QR plate with 1/4" screws suitable for most DSLR Cameras,Camcorders and telephoto lenses..
  • ➤360° PANORAMIC HEAD,bird shotting and sport event shotting: Gimbal head the panning base and vertical arm are capable of 360 degree rotation (horizontal and vertical), gimbal can meet the photography demand of different angles.For moving animals like flying birds for outdoor shooting or sport event video recording..
  • ➤standard ,NON-SKID Arca-Swiss: Gimbal for dslr non-Skid slip design on Arca-Swiss standard quick release plate.Tripod heads Includes Arca-Swiss type standard 1/4inches QR plate and Bubble Level. Non-Skid slip design on Arca-Swiss standard QR p....
Check Stock

ProAm USA Orion DVC200 DSLR Video Camera Crane - Aircraft Aluminum Camera Jib - 8 ft Extendable Filmmaking Boom with L-Shaped Side Camera Mounting Bracket

  • Don't be fooled by imitations! ProAm virtually created the market for mid-sized cranes..
  • The "single rail" design achieves a light weight crane easily assembled by 1 person. It is complemented and made more stable by a second rail that accomplishes the tilt function..
  • Made from 6061 Aircraft Aluminum, Extends 5' from Tripod. Fluid steel bearings, Powder-coating, Tool-less Design..
  • L-Shaped camera bracket allows for manual tilt as camera sits on the side of the bracket, providing more mobility close to the ground. Smooth effortless motions on three axis. Optional 4' Extension can be added..
  • Quickly mounts to standard tripod heads using 1/4" x 20 threads (Tripod not included) or mount to a Heavy Duty Stand using our Stand Mount (Stand and Stand Mount not included).
Check Stock