Reviews Cam Lock Suction Hose Fittings

Abbott Rubber - 1240-KIT-3000-1145-QC PVC Suction and Discharge Hose Pump Kit, Green/Blue, 3' Male X Female Aluminum Cam and Groove, 3' ID

All-In-One Kit Provides Everything Needed to Retrofit Your Pump.
Includes 20 ft PVC Suction, 50 ft PVC Discharge Hose, Steel Round Hole Strainer and Cam and Groove Adapter.
3" Male X Female Cam and Groove Fittings Come Standard on Hoses.

Hose Dimensions: 1-1/2" Inside Diameter (1.93” Outside Diameter) Liquid Suction Hose, 20 foot Length. This hose section ships without fittings, but is compatible with most 1-1/2" Fittings with a Hose Shank.
Hose Materials: Black EPDM Rubber Tube with a Rigid Lime Green Polypropylene Helix. The rigid helix protects the tube from wear and helps the hose slide over rough surfaces..
Superior Flexibility: EPDM suction hose is more flexible than PVC suction hose, especially in colder weather. This hose has a bend radius of 3”..
Cold Weather Performance: This hose remains flexible even in sub-zero temperatures. It has a working temperature range of -40 ºF to 160 ºF.
Applications: Water Suction, Septic and Wastewater Handling, Agricultural and Irrigation, Construction Dewatering, Marine Bilge Discharge, Fracking, Trash and Sump Pump Suction.

Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
Aluminum for resisting corrosion and tarnishing.
Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.

Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
Aluminum for resisting corrosion and tarnishing.
Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.

...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
To install fittings, pull up lever on ball lock disconn....

2" Inside Diameter (2.33” Outside Diameter) Liquid Suction Hose, 20 foot Length.
Does not include fittings, but is compatible with most 1-1/2" hose fittings with a hose shank..
This Suction hose has a 65 PSI working pressure and a 28 inHg vacuum Rating at 68 degrees fahrenheit..
Typically used on the suction side of liquid or water transfer applications.

[Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
Use to evacuate a flooded yard, pump out water from a barrel, and more.
[Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
Fittings designed to fit standard garden hose spigot.
[Use Your Pump]: Threaded brass ends for use with your water pump.
Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
[No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
[Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.

Works with your automatic vacuum to clean your pool faster.
Plumb the canister between 2 hose sections of your suction-side automatic vacuum hose….
…and the large-capacity cyclonic canister goes to work trapping leaves and debris.
Never lose suction from a blocked skimmer basket.
Includes fittings for Zodiac cleaners and slip fittings for all other brands.

30-PACK CAM LOCK NUT CONNECTORS FITTINGS——Material: Zinc Alloy, Anti-corrosion.
Surface Treatment: Nickel Plating. Fit for various types of furniture, cabinet, drawer dresser..
CAM CONNECTOR SIZE——Diameter (Approx.):15mm / 0.6″.
Inner Height(Approx.): 3mm / 0.12″.Easy to install, thicken material..
HOW TO USE——One of the three in one component, which needs to be used together with dowel pin and pre-inserted nut..
APPLICATION WIDE——Cam Fittings fit for various types of furniture, cabinet, drawer dresser, wardrobe and furniture panel. (Please check the size before buying).
YOU WILL GET——30Pcs Furniture Cam Fittings, solid and durable, not easy to twist off, long service life.

1Pc 6AN 25 feet of high-pressure fuel injection hose.
1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.