Reviews Cam Clutch Bearing

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • ...including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
  • CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • includes (1) 3-eye round clutch plate sander arbor, (3) 1/4-inch – 20 Hex screws, (2) 3/8-inch – 16 Hex....
Check Stock

OTC 5035 Truck Clutch AdjusTment Gauge Set

  • Enables technicians to check the adjustment of pull-type heavy-duty clutches, ensuring their correct operation.
  • One gauge checks the amount of free play between the yoke and the bearing's wear pad.
  • Other gauge lets you determine the amount of travel between the release bearing and transmission bearing cap.
  • Includes clutch pedal free play gauge and release bearing travel gauge.
Check Stock

Inner Camshaft Needle Bearing Installer Tool & Remover Removal Puller Fit For 2017-2022 Harley Davidson Milwaukee Eight Engine (M8)

  • ...Ultra Limited Low, 2017+ Harley Ultra Limited, 2017+ Harley Tri Glide, 2017+ Harley Street Glide, 2017+ Harley Softail, 2017+ Harley Road King, 2017+ Harley Road Glide, 2017+ Harley Freewheeler, 2018+ Harley Fat Boy, 2018+ Harley Fat Bob, 2017+ Harley Electra Glide, 2017+ Harley Breakout..
  • APPLICATION: This camshaft bearing installer tool & remove puller fit for Harley Milwaukee Eight Engines (M8) models. Compatible with all Harley Davidson twin cam..
  • FUNCTION: The bearing puller is designed to grip the needle bearings and prevent them from falling into the crankcase. The installation tools are designed to press on the outermost diameter of the bearing, eliminating damage to the bearing, cam, or housing. The pressure adapter also sets the bearing to the proper depth..
  • FEATURES: The inner camshaft needle bearing installer tool & remover puller with special style collet and fine thread. Easy to install, the design holes can be suitable for the engine, and the installation progress can be checked..
  • MATERIAL: Made of heavy-duty steel with black powder-coated finished, prevent corrosion and rust, solid and durable. The kit includes 12 pieces, including a cam bearing plate, installer tools, puller tools, and thumb screws, as the picture shows..
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

Barnett 1998-2012 Harley Big Twin Kevlar Clutch Kit w/Heavy Duty Diaphragm Spring

  • Fits 1998-2016 Harley Davidson Big Twin (EXCEPT 2013-2016 CVO/SE/FLHTC L).
  • 9 Barnett Clutch Friction Plates (Kevlar) #302-30-10013.
  • 8 Barnett Steel Clutch Drive Plates (0.063" Thick) #401-30-063014.
  • Barnett Heavy-Duty Diaphragm Clutch Spring #502-00-01008.
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

Bower/BCA 202FF Brng

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

RYC New A/C Compressor Clutch Bearing BR-19

  • Premium Quality New A/C Compressor Clutch Bearing..
  • Guaranteed fit! Confirm that this A/C Compressor Clutch Bearing will fit your vehicle by using Amazon's garage..
Check Stock

Complete Tractor 1112-5989 Clutch Kit Brown

  • Specs: Clutch Kit, Type: Single, Disc Outside Diameter: 10", Spline Count: 15, Includes: Pressure plate, disc, release bearing, pilot bearing and....
  • Compatible with/Replacement for Ford/New Holland: NDA7550B, NDA7563A.
  • Compatible With / Replacement For: Ford/New Holland 1801 Indust/Const.
  • 100% New aftermarket Clutch Kit built to meet OEM specifications for Ford/New Holland.
Check Stock

Coast To Coast 619005 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock