Reviews Cadmium free Silver Brazing Rods

20 Sticks BLUEFIRE JAgP-5 1/2 lb 5% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-3 0.050\x1/8\x14\ equivalent to HARRIS STAY SILV 5 Professional Grade Gas Soldering Torch Accessory

  • 5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
  • Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006.
Check Stock

Solderweld SW-HVAK00 Brazing Pack with Carrying Case includes 56% 0% Braze Rods Al-Cop Aluminum to Copper - Alloy Sol Repair Solder Rods Rods and Flux

  • 2 sticks of Sil Sol 56% Flux Coated Brazing Rods.
Check Stock

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

  • ...des enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes..
  • Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame. Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
  • Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
  • Enhanced metallicity: The addition of silver will improve t....
Check Stock

20 Sticks BLUEFIRE JAgP-15 1/2 lb 15% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-5 0.050\ x 1/8\ x 14\ equivalent to HARRIS STAY SILV 15 Professional Gas Soldering Torch Accessory

  • 15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%.
  • Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
  • Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006.
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Aufhauser SilverAlloy 56% Ag BAg-7 1/16 x 18 Flux Coated Silver Solder Brazing Rods 3 Sticks

  • Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks).
  • For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
  • For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..
  • Meets AWS A5.8 BAg-7. AMS 4763, QQB-654A Class BAg-7.
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

SSF-6 56% Silver Solder Brazing Rods 2 rods

  • Contains: 2 x 18" x 1/16" diameter flux-coated rods.
  • 1" of our high content silver solder will flow 18"--the only silver solder with this capability.
  • Cadmium-free: Ideal for food and pharmaceutical applications.
  • Can be used on: Steel, Stainless Steel, Cast Iron, Copper, and Brass - in any combination.
Check Stock