Reviews Cable Jumper

YANTU 100% Copper Jumper Cables, 13 Feet 6 Gauge Heavy Duty Booster Cables, Insulated Alligator Clamps, Excellent Conductivity, Suitable for Car/SUV/Truck/Van/Diesel Vehicles

  • ...TY - Compared with copper-clad aluminum, pure copper cable has low electrical resistance, high stability and longer service life. Excellent electrical conductivity ensures full current delivery. It can instantly start the vehicle with dead battery..
  • INSULATED CLAMPS & STABLE BITE - New patent alligator clamps of the jumper cables have reserved bite grooves for more stable bite with the positive and negative poles of the battery. The clip is labor-saving and antiskid with shielded surfaces for safety, which can be easily used by female drivers..
  • - 40°F AVAILABLE & FLEXIBLE CABLE - The YANTU heavy duty jumper cables use PVC soft rubber, which is stronger, more wearproof, resistant to freezing, cracking & folding and doesn’t tangle. The cables stay flexible even in very cold weather(-40℃/-40℉)..
  • 13FT LONG CABLE ENOUGH USE - The 13FT jumper cables are long enough for use, can easily reach the battery on the opposite side of the vehicle to the jumper's battery. Whether at home, while traveling, or in an emergency, this cable is a great choice for you..
  • APPLICABLE VEHICLES & INSTRUCTIONS FOR USE - This amazing 100% copper jumper cables are suitable for car/sedan/suv/truck/van/diesel vehicles. Color identification of cables prevents crossing of wires: Re....
Check Stock

TPF Booster Jumper Cables Automotive Replacement Battery Jumper Cables Alligator Clamp Booster Battery Clips for 12V Portable Car Jump Starter (Normal)

  • Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection.
  • Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black.
  • EC5 Male plastic shell blue, fits 5mm Banana plug..
  • Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers.
  • Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle.
  • Cautions: Do not reverse the operation sequence of jump starter.
  • Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage.
  • Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents..
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is produced after strict testing to meet the needs of modern people. The quality and insertion loss are strictly guaranteed. It is compatible with all standard optical fiber equipment and connectors. It can be used in all kinds of optical fiber LAN, optical fiber communication system, cable TV and other communication equipment. Very trustworthy..
Check Stock

EC5 Jumper Cable, Yeworth Automotive Replacement Car Jumper Cable Alligator Clip Clamp to EC5 Connector for 12V Portable Emergency Car Jump Starter Booster

  • Usage of car jump starter: 1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole.
  • 2. Plug the clamp EC5 into the jumper starter's socket.
  • 200A instant Maximum start current, fits most brands of mini portable jump boxes, mobile chargers..
  • Compatible with most 12V mini jump starter..
  • Strong alligator clamp with full copper material cable, make sure the great qulity and safety protection..
  • What You Get: 1 x Yeworth Jumper Starter Cable Clamp.
  • Friendly customer service always ready to assist you..
Check Stock

2PCS Battery Jumper Cable Clamps, Govel Heavy Duty Pure Copper Alligator Clips Jumper Cables Boost Clamp, Car Battery Charger Clamps, Suitable for Car Auto Vehicle Boat (Red & Black)

  • 【Perfect Tools】 The set of Govel jumper cables replacement battery clamps are ideal for replacing, repairing a damaged pair of connectors on an existing jumper cable, or creating custom-length cables..
  • 【Heavy Duty】 The conductors of the Govel alligator pliers are made of pure copper for good electrical conductivity, the strong jaws teeth of the jumper cables clips will not bend out of shape when squeezed..
  • 【Parameter Reference】 The red Govel alligator is positive and the black one is negative. Car battery clamps support cable gauge from 2 to 6 AWG. Input: 12V-24V.
  • 【Widely Use】 These jumper cable clamps are suitable for various battery chargers projects such as voltage tester, all cars and truck batteries, solar panels, camping, boats, electric fences, etc..
  • 【Attention Points】 Don't forget to slide the rubber handles over the wires before you secure the wire-ends to the clamps. If you have any questions on use, please feel free to contact us..
Check Stock

3pcs 24-Pin ATX Power Supply Jumper Bridge Connector PSU Tester

  • 24 Pin EPS / ATX power supply jumper bridge tool is compatible with 24/20 pin connector..
  • 24 Pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self..
  • 24 Pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use..
  • Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself..
  • What You Get: 3x 24-Pin power supply jumper,.
Check Stock

SUHU Car Battery Jump Starter Portable,1500A Peak Jump Starter Battery Booster Up to 7.0L Gas or 5.5L Diesel Engine,3.0 USB Fast Charging 12V Portable Power Jump Starter

  • Start Dead Batteries - Jump starter battery pack safely start a dead battery in a few seconds,1500-amp portable lithium battery jump starter, up to 20....
  • Smart Car Battery Jump Starter Cable - Safely connect to any 12-volt automotive car battery. Our jumper cable use mistake-proof design featuring....
  • Affordable and Powerful Jump Starter - It's a car jump starter, portable power bank, and LED flashlight. Recharge smartphones, tablets, and other USB....
  • Advanced Car Battery Boot Power Configuration: Special designed smart jumper cable makes operations much easier - indicator notifies for error....
  • What's you will get : SUHU Portable Car Battery Jump Starter Pack, Smart Jumper Clamp, Type-C USB Cable, Protective Case, User Manual. It can be used....
Check Stock

EDGELEC 120pcs Dupont Wire 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Breadboard Jumper Wires Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cable

  • Package include: 15cm (5.9inch) / 40pin Female to Female jumper wires / 40pin Male to Female jumper wires / 40pin Male to Male jumper wires (Total 120pcs).
  • Connector Type: Standard 2.54mm pitch dupont housing connector / 1pin-1pin.
  • Cable length: 15cm (5.9 inch) / Cable material: 12-core pure copper wire.
  • Cable features: Separable multicolored (10 colors) softness ribbon cables.
  • For DIY experiment / Electronic projects / Arduino breadboard / PC motherboard / PCB project.
Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
  • 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
  • Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
  • Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock