Reviews Cable Clamp Base Mount

Gas Spring Laptop Mount with Adjustable Tray - Klearlook 2in1 Full Motion Monitor Laptop Stand Mount,Fully Adjustable Extension Arm Mount with 75x75/100x100mm VESA Plate,Clamp-on and Grommet Mounting

  • ...ight Adjustable】The desk laptop arms easily tilt, swivel and rotate (swivel: -90°/+90°, rotate: 360°, tilt: -90°/+85° and height adjustment along the center pole). The wide adjustable range make it a breeze to set your own comfortable workstation and switch between standing and sitting posture..
  • 【Integrated Cable Management】Each clamp on the tray features a cable clip that helps organize your laptop cables in one place. Meanwhile, attach the included cable clip to the pole and manage the cables and hex wrenches..
  • 【Monitor Arm Mount】It come with VESA plate with VESA mounting holes 75x75mm and 100x100mm. You can replace the laptop tray with your monitor. VESA plate can be installed onto the back of monitor individually. Not only flat monitor, but also curved monitor can be connected with included screws and spacers. The monitor desk extender tray fits 15 to 27 inches monitor.(Max Load is 15.5lbs).
  • 【Multiple Installation Options】this monitor laptop riser arm offer clamp and grommet mounting( C-Clamp allows the thickness of the table up to 3.35 inches and Grommet-Base maximum supports 1.6’’ diameter desktop cable grommet hole). All tools and hardware are provided for easy assembly..
Check Stock

GMRS Mobile Radio Mini Size 20 Watt Long Range GMRS Repeater Capable NOAA Weather Alert Two-Way Radio GS800D

  • 1.｜GS800D｜This GMRS Mobile Radio with 8 repeater channels, 15 high power GMRS channels 10 NOAA weather channels provide clear and crisp communication, compatible with all GMRS and FRS radios. FCC ID: 2AV62KT8900D..
  • 2.｜Long Range｜With External Bracket Lip Mount NMO Antenna: 3.5'' Antenna with NMO Base Mounting (100w) and 16.4 ft PL259 UHF Male cable. It built in clamp that attaches to the trunk or the hood of car..
  • 3.｜Mini Size｜As a compact mobile radio (3.85 (W) x 4.96(D) x 1.69 (H)), it is small enough to mount just about anywhere in any vehicle, suitable for outdoor activities such as mountaineering, hiking, camping and so on..
  • 4.｜Functions & Features｜Dual Band Scanning Receiver can monitor NOAA channels and 160 programmable scanner channels for interesting channels. High (20W)/ Mid (10W) /Low (5W) and Wideband or Narrowband Switchable. CTCSS, DCS, 2Tone, 5Tone, DTMF, Quad Watch, TOT, Remote Stun, Remote Revive, Remote Kill, Patrol/ Monitor Function etc..
  • 5.｜In The Box｜1*GS800D Mobile Radio, 1*Microphone, 1*DC Cable, 1*Mounting Brackets, 1*Screws & Mounting Hardware, 1*Programming Cable, 1*3.5 Inch NMO Antenna, 1*16.4 ft RG58 Coax Cable with Clamp, 1*User’s Manual..
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • ...f Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..
Check Stock

32 Inch Webcam Stand Camera Mount, Upgraded Thick Base Flexible Gooseneck Stand Desk Webcam Mount Clamp for Logitech Webcam C930e C930 C920 C922x C922 Brio 4K C925e C615, Gopro Hero 8 7 6 5 4

  • 【Upgrade Thick Clamping Base】We have upgraded the clamp base. It is thicker and more durable. The clamping base is easy to be secured in place without the need to go overboard. Please place one hand over the clamp mount to move the goose-neck arm around..
  • 【Adjustable Height and View】Up to the max 83cm / 32 inches. With gooseneck, makess it easier and flexible to operate and access different best height you want. 360-degree rotating ball joint on webcam Mount supports different best viewing angles. Please place one hand over the clamp mount to adjust the arm around.Please ensure that the desk using is steady with No wobble and it is very important to to minimize annoying bouncing while shooting and protects your valuable device from tipping over..
  • 【Universal Compatibility】 The camera mount stand fits all devices with a 1/4'' screw hole, like Logitech Webcam Brio 4K, C925e, C922x, C922, C930e, C930, C920, C615, action cameras, Gopros, Projectors, DSLRs, etc..
  • 【Wide Application】The web cam stand with an adjustable clamp base can open maximum to 2.7"/7cm, allow you securely clamp on the desk, headboard, nightstand, end table, kitchen counter, sideboard, etc. Non-slip cushion protects your furniture from scratches. The clamp mount of the base....
Check Stock

Neewer Microphone Arm, Upgraded Mic Arm Microphone Stand Boom Suspension Stand with 3/8'to 5/8' Adapter and Cable Ties Compatible with Blue Yeti, Snowball, Quadcast and Other Mics, Max Load 2KG

  • 【Flexible Boom Scissor Arm】 This adjustable microphone boom arm is easy to fold up and carry. It’s also convenient to adjust the angle and height of the arm to suit your vocal recording need. Loosen the adjustment knob and then adjust the boom arm.
  • 【Desk Mounting Clamp】 The desk mounting clamp features rubber padding to protect your desk from scratches. Fits most desks with a desktop thickness of up to 2"/5.3cm.
  • 【3/8" to 5/8" Adapter & Mic Clip】 The included 3/8" to 5/8" screw adapter can be used to mount a compatible microphone (such as Blue Yeti, Blue Snowball) on the boom arm. (Not compatible with Blue Yeti Nano which has a 1/4" thread mount.) The maximum diameter of the microphone clip is 1.26"/3.2cm. Ideal for stage/studio recording, broadcasting, TV stations, and more.
  • 【Heavy-Duty Support】 The boom arm is compact yet strong enough to support a maximum load of 4.4lb/2kg thanks to the strong springs and metal positioning screws. The springs don’t get in the way of tightening the adjustment knob.
  • 【Cable Straps & Solid Base】 Use the five cable straps to organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock

ErGear Ultrawide Monitor Arm with USB, Monitor Mount Fits 13-35” Screen, Monitor Stand with Full Motion Gas Spring Arm Holds from 4.4lbs to 26.4lbs

  • Fit 13”-35” Screen Desk Mount: Heavy-duty Arm provides powerful support for your ultrawide monitors, holds up to a 26.5lbs.With 75*75mm or 100*100mm backside VESA..
  • Customize Your Screen Angle: Easy height adjustment, Up-down Tilt: +85°/-30° Rotate：360° Swivel：±90°,provides vertical and horizontal monitor shifts for different requirements to improve work efficiency..
  • Clamp Base & Grommet Mounting: You may choose to clamp the base to the edge of the desk. Grommet Mounting allows free location on the desktop where a mounting hole exists..
  • Stability - The solid construction and stable clamp/grommet base provide stable and secure holding for your monitors..
  • Integrated Cable Management & USB Connector: lifted monitor and concealed cables give you a messy-free desktop enjoyment. The package includes all accessories for mounting and access for instant mounting guidance..
Check Stock

Neewer Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8” to 5/8” Screw and Cable Ties Compatible with Blue Yeti, Snowball, Yeti X, Quadcast and Other Mics, Max Load 1.5kg

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. And the springs don’t get in the way of tightening the adjustment knob.
  • 【Desk Mounting Clamp】 The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm.
  • 【3/8” to 5/8” Screw Adapter & Mic Clip】 The 3/8” to 5/8” adapter allows you to mount a compatible microphone (like Blue Yeti or Blue Snowball) on the boom arm. It’s not compatible with Blue Yeti Nano which has a 1/4” thread mount. The microphone clip mounts a microphone with a shaft diameter of 1.26”/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock

SMALLRIG Monitor Cage for Atomos Ninja V,Built-in NATO Rail and HDMI Cable Clamp Monitor Cage 2209

  • ???? Multiple Threaded Holes: SMALLRIG Ninja V Cage for Atomos mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side. Across the top and bottom the cage features multiple 1/4’’-20, 3/8’’-16 holes, and a locating mount point for ARRI on the base.
  • ???? Built-in NATO Rails: NATO rails are also provided along on both top and bottom to allow use with a range of SMALLRIG mounts such as SMALLRIG Ball Head Magic Arm 2071 or the 2072 for quick release.
  • ???? HDMI Cable Clamp: Includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SMALLRIG HDMI Cable Clamp 1693 for the HDMI output. It is attached on the left to protect the HDMI cable and port.
  • ???? Drive Locks: For backwards compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the cage’s form factor.
  • ???? Attachment Points: SMALLRIG ninja v cage features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.
Check Stock

MOUNTUP Single Monitor Desk Mount, Adjustable Gas Spring Monitor Arm Support Max 32 Inch, 4.4-17.6lbs Screen, Computer Monitor Stand Holder with Clamp/Grommet Mounting Base, VESA Mount Bracket, MU0004

  • ...n 0.39''-3.15'', hole diameter within 0.39''-2.36''). If the thickness of your table is not within this range, please relate with us for suitable C-clamp. Comes with clear manual and mounting hardware needed. Less than 15 minutes from opening box to use..
  • Free Up Your Desk Space: Heavy-duty monitor arm with built-in cable control professionally helping to hide wires. The single monitor stand releases more than 80% desktop space to place office accessories compared to a monitor holder with large base while creating a more comfortable work environment. More desk space, better workflow!.
  • Sturdy Construction & Friendly Service: The stable gas spring and clamp/grommet base are strong and durable enough to ensure the safety and security of your single monitor setup. Backed by MOUNTUP 3-year support..
Check Stock

Luling Arts Mic Arm, Adjustable Suspension Microphone Arm Desk Scissor Large Boom Arm Stand for Blue Yeti/Snowball/HyperX QuadCast with 6’’ Light, Shock Mount,2 Adapters, Pop Filter

  • 【Upgraded Mic Arm Leg】The microphone arm Improved from hollow to solid leg,no longer break or shake. more Stability Range of motion and stronger .this mic arm will not break the legs, the market will break the legs after 6 months of use..
  • 【Upgraded Large Boom Arm】Suspension Boom arm Upgraded from 13'' to 16'', works for HyperX QuadCast , Blue Yeti, Rode, Shure, Snowball, Blue Yeti Nano ,blue yeti Shock mount and more microphones.Max support weight is 70oz/2kg (4.4lb)..
  • 【Mic stand with Light】The desk microphone stand with 6‘’ LED Light let you moving and recordings for enhanced clarity and luminance. the desk lamp is integrated into the mic stand kits.Perfect for Computer/Game Room/Studio/Podcasting/YouTube in your any times..
  • 【Upgraded Desk Mount Base】The Upgraded Suspension desk mount microphone boom arm comes with big desk clamp, easy to set to desktop up to 2.4''/60mm thick. the headset hook is integrated into the desk clamp..
  • 【Complete Microphone Stand bundle 】The boom mic stand bundle comes 1x 16'' Large Mic Arm, 1x 6'' Ring light, 1x Table Big mounting clamp, 1x 3/8" to 5/8" Screw adapter ,1x 1/4"Screw adapter ,1x Mic Clip,1x Shock mount,1x Pop Filters, 5 x Cable tie,1 x Manual..
Check Stock