Reviews C Type For Steel

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • 003c/b003e[HIGH QUALITY]:003c/b003e Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
Check Stock

Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy

  • High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
  • K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
  • Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
  • Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check Stock

Steel Strapping Sealer, 5/8 in. W

  • 003cb003ePrice For:003c/b003e Each 003cb003eItem003c/b003e: Steel strapping Sealer 003cb003eMaterial003c/b003e: steel 003cb003eApplication003c/b003e: Flat Surfaces 003cb003eWeight003c/b003e: 4 lb. 003cb003eStyle003c/b003e: Front Action 003cb003eFor Use With003c/b003e: Polyester 003cb003eFor Strapping Thickness003c/b003e: Up to 0.047" 003cb003eFor Strapping Width003c/b003e: 5/8" 003cb003eNotch Type003c/b003e: Crimp 003cb003eCountry of Origin (subject to change)003c/b003e: Taiwan.
Check Stock

Testo 104 - Waterproof Folding Food Thermometer (Part Number 0563 0104)

  • Features: Ideal for applications in the food sector | Two purposes: Infrared and penetration thermometer | High-quality including robust folding joint for tough working use | 2-point laser with 10:1 optics shows the exact measurement area..
  • Temperature - NTC Range: -50°C to +250°C, Accuracy: ±1.0°C for (-50°C to -30.1°C), ±0.5°C for (-30°C to +99.9°C), ±1 % of mv for (+100°C to +250°C), Resolution: 0.1°C, Reaction time: t99 = 10 s | Operating Temperature: -20°C to +60°C.
  • Display lighting: illuminated | Housing: ABS / TPE / PC, diecast zinc, stainless steel.
  • Protection class: IP65 | Diameter probe shaft tip: 2.3 mm.
  • Futher features: Auto hold, hold, min./max. |.
  • Diameter probe shaft: 3 mm | HACCP-compliant | Battery type: 2 AAA micro batteries.
  • Accessories: Testo 104 food thermometer with folding temperature sensor, user guide, calibration protocol, adhesive color strips, batteries. | Applications: Food transport trucks, refrigerators, Food Industries, hotels & restaurants, etc..
Check Stock

2 Pcs Digital 2 Channels K Type Thermometer with 8 Thermocouples (Wire and Stainless Steel) -50~1300°c (-58~2372°f) Dual Measurement Meter Sensor Handheld HVAC Thermometer High Temperature Pyrometer

  • High Accuracy: reading accuracy (±0.1°C ±0.4), fast response using K type thermocouple probe, this digital temperature gauge will bring you a lot of convenience.
  • You will get 2 pcs of K type thermometers, 4 pcs of wire thermocouples and stainless steel thermocouples.
  • Multiple Temperature Display: in addition to the max/ min/ average, data hold, and auto power off functions, this hand held temperature reader is specially designed with a "T1-T2" calculation function, making it easy for the user to find the difference between two samples.
  • ​Portable and Practical: powered by battery, this thermometer with probe is portable and practical, operate it with 6 simple buttons with clear instructions, suitable for beginners and skilled users.
  • Plus, the removable silicone rubber cover protects your device from accidental drops.
  • It is factory calibrated and factory reset, and any standard K type thermocouple connector can be applied to replace the included thermocouple when needed.
  • Wide Measurement Temperature Range: mainframe range of digital k type thermometer is about -50°C ~ 1300°C (-58°F ~ 2372°F).
Check Stock

NC HAISDA Stainless Steel Corby Bolts Fasteners EDC KnifeMakers Pivot Pin Rivets DIY Knife Handle Studs Screws Pack of 10 5mm

  • 003cb003ePrice For:003c/b003e Each 003cb003eFastener Thread Direction003c/b003e: Right Hand 003cb003eMaterial003c/b003e: Low carbon steel 003cb003eMaterial Grade003c/b003e: A307B 003cb003eSystem of Measurement003c/b003e: Inch 003cb003eItem003c/b003e: Step Bolt 003cb003eFastener Thread Type003c/b003e: UNC (Coarse) 003cb003eGrade003c/b003e: A307 003cb003eHead Height003c/b003e: 0.188 in to 0.208 in 003cb003eMeets/Exceeds003c/b003e: ASME B18.5 003cb003eFastener Length003c/b003e: 3 in 003cb003eSquare Height003c/b003e: 0.188 in to 0.219 in 003cb003eHead Dia.003c/b003e: 1.219 in to 1.219 in 003cb003eDia./Thread Size003c/b003e: 3/8"-16.
  • 003cb003eFastener Finish003c/b003e: Plain 003cb003eFinish003c/b003e: Plain 003cb003eBasic Material003c/b003e: Steel 003cb003eStep Bolt Type003c/b003e: Step Bolt 003cb003eLength003c/b003e: 3" 003cb003eFastener Industry Standards003c/b003e: ASME B18.5 003cb003eSquare Width003c/b003e: 0.368 in to 0.388 in 003cb003eCountry of Origin (subject to change)003c/b003e: Multiple.
Check Stock

Metric Steel Belleville Spring Washer, 1.969\(50.0mm) Outer Diameter, 0.724\(18.4mm) Inner Diameter.059\(1.5mm) Thickness, 2,606 Newtons Max. Load (Pack of 10)

  • Type 302 Stainless Steel per ASTM 5906 for Thickness ≤0.072”.
  • Type 17-7 PH Stainless Steel per AMS-5528 for Thickness 003e 0.072”.
  • Slightly Magnetic (302) or Highly Magnetic (17-7 PH).
  • Maximum Operating Temperature of 500̊ F (260̊ C) for type 302 and 550̊ F (290̊ C) for type 17-7 PH..
Check Stock

Metric Steel Belleville Spring Washer, 2.205\(56.0mm) Outer Diameter, 1.122\(28.5mm) Inner Diameter.079\(2.0mm) Thickness, 4,438 Newtons Max. Load (Pack of 10)

  • Type 302 Stainless Steel per ASTM 5906 for Thickness ≤0.072”.
  • Type 17-7 PH Stainless Steel per AMS-5528 for Thickness 003e 0.072”.
  • Slightly Magnetic (302) or Highly Magnetic (17-7 PH).
  • Maximum Operating Temperature of 500̊ F (260̊ C) for type 302 and 550̊ F (290̊ C) for type 17-7 PH..
Check Stock

Shim, Round, Min ID 0.687 in, PK25

  • 003cb003ePrice For:003c/b003e Each 003cb003eInside Dia.003c/b003e: 0.687" 003cb003eShim Material003c/b003e: Stainless Steel 003cb003ePackage Quantity003c/b003e: 25 003cb003eColor003c/b003e: - 003cb003eTemp. Range (F)003c/b003e: - 003cb003eShim Thickness003c/b003e: 0.0030" 003cb003eThickness (In.)003c/b003e: 0.0030" 003cb003eShim Temper003c/b003e: Not Rated 003cb003eTensile Strength (PSI)003c/b003e: 70,000 003cb003eMaterial003c/b003e: 18-8 Stainless Steel 003cb003eRound Shim Type003c/b003e: Arbor Shim 003cb003eThickness Tolerance003c/b003e: +/-0.0005" 003cb003eGrade003c/b003e: 18-8 003cb003eItem003c/b003e: Shim 003cb003eMeets/Exceeds003c/b003e: -.
  • 003cb003eRockwell Hardness003c/b003e: B80 003cb003eOutside Dia.003c/b003e: 0.873" 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

3 dia., 1/4-28 thds., Four Prong Plastic Knob w/Black Thermoplastic Thru Hole Brass Insert (1 Each)

  • 003cb003ePrice For:003c/b003e Each 003cb003eWidth003c/b003e: -30 to 400 F 003cb003eStyle003c/b003e: Four Arm 003cb003eItem003c/b003e: Four Prong Knob 003cb003eKnob Type003c/b003e: Clamp Knob 003cb003eFinish003c/b003e: High Gloss 003cb003eBase Dia. (In.)003c/b003e: 0.875 003cb003eMaterial003c/b003e: HR Phenolic 003cb003eStandards003c/b003e: Steel, Zinc Plated 003cb003eHeight (In.)003c/b003e: 1.00 003cb003eOverall Length003c/b003e: 2.01" 003cb003eThread Type003c/b003e: Course 003cb003eOverall Height003c/b003e: 1.0 003cb003eThread Size003c/b003e: 3/8-16 003cb003eLength003c/b003e: 2.01" 003cb003eHeight003c/b003e: 1.00" 003cb003eDiameter003c/b003e: 2.00".
  • 003cb003eScrew Length003c/b003e: 1.00" 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock