Reviews Button Head Screws

VIGRUE M3 M4 M5 M6 Screws/Bolts Nuts Assortment Set, Button Head & Socket Head Metric Screws, 304 Stainless Steel, 588Pcs Silver

  • 【Variety Pack Socket Button Head Cap Screws】This screw set assortment contains socket head screw-M3,M4,M5,M6x8mm/12mm/16mm.
  • and button head screw-M3,M4,M5x8mm/12mm/16mm with matching nuts, small projects helper..
  • 【304 Stainless Steel Allen Screws】All screws bolts nuts are made of 304 stainless steel, features high strength and good corrosion resistance even in bad environment..
  • 【Metric Screws Bolts Nuts Kit】This screws assortment includes screws and nuts, saves a lot time/money for searching seperately, and comes in different sizes, no need drive to hardware store..
  • 【Sturdy Storage Case】All screws nuts bolts are placed in a clear divided storage box, NO MIX. Widely used in electronic products, mechanical equipment, electrical appliances, water conservancy, furniture and other projects..
  • 【GUARANTEE in VIGRUE】Customers enjoy lifetime service for product quality problem, if you have any concerns, please contact us for a happy solution..
Check Stock

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

FOLIV 315Pcs 1/4-20 x 1/2 to 1-1/2 Button Head Socket Cap Screw Bolts Nuts Washers Kit Class 12.9 Alloy Steel Anti-Oxidation Full Machine UNC Thread

  • 【Head Type】Button Dia./Thread Size: 1/4"-20.
  • 【Screw Length】1/4-20x1/2",1/4-20x3/4",1/4-20x1",1/4-20x1-1/4",1/4-20x1-1/2" Button Head Screws/Bolts with matching washers and nuts..
  • 【Quantity】Contains 315pcs/5 sizes of the most commonly used 12.9 Alloy Steel Button Head Socket Screws/Bolts Nuts Washers..
Check Stock

NGe M4x8mm Button Head Socket Cap Screws,Alloy Steel Fully Threaded,Allen Hex Drive M4x8,100Pcs

  • M4x8mm Black Alloy Steel Button Head Socket Cap Screws.
  • Commonly referred to as allen bolts, button heads, or socket head screws.
  • Domed head with a flat bottom that protrudes above the installation surface.
  • The low profile of the socket button head makes a very clean looking, and offers a much larger contact surface..
Check Stock

Cicidorai M5-0.8 x 8mm Button Head Socket Cap Bolts Screws, 10.9 Grade Alloy Steel, Black Oxide Finish, Machine Thread, Allen Socket Drive, Quantity 50

  • The button head socket cap screws are 10.9 Grade Alloy Steel which offers chemical and corrosion resistance..
  • Pitch Size: 0.8 mm. Thread Length: 8 mm(excluding the height of the head).
  • Button Head Hex Socket Screws is very suitable for used in wood and moist environment..
  • 50 pieces of Black Socket Head Cap Screws (M5 x 8mm).
  • Perfect For Interior Renovation, Mechanical Installation Communication Equipments and Ship Assembly..
Check Stock

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

VIGRUE 570PCS Stainless Steel M3 Button Head Hex Socket Cap Screw Bolts M3 x 4/5/6/8/10/12/14/16/18/20/25mm Screw and Nuts Flat Washer Assortment Kit Fully Machine Thread

  • √ Size: M3 Button Head Socket Cap Screws Bolts Nuts Assortment Kit..
  • √ Quantity: It contains 570pcs/11 Sizes of the most commonly used Stainless Steel Button Head Socket Cap Screws Bolts Nuts..
  • √ 304 Stainless steel features rust resistant to ensure life-time use, these quality m3 screws for home, automotive, and shop use..
  • √ Widely Application: This metric m3 screw assortment is perfect for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection.[GUARANTEE]-Whenever you need us, please contact us by email or Q&A. Satisfaction guaranteed. Money back or exchange.Accept Customization.
Check Stock

M8-1.25 x 16/20/25/30/40mm Button Head Socket Cap Screws VIGRUE 135PCS Allen Hex Drive Screws Nuts Washers Assortment Kit 18-8 Stainless Steel 304 Bright Finish Fully Threaded

  • Screw Length 16mm to 40mm: this cap screws kit include sizes M8 x 16mm/20mm/25mm/30mm/40mm button head screws bolts with matching washers and nuts..
  • Quantity: the metric M8 screws kit contains 5 sizes of the most in-demand models 304 stainless steel button head socket screws nuts washers, totally 135pcs.
  • Great Performance: 304 stainless steel 18-8, which features strength, offers superior rust resistance and the excellent oxidation resistance in bad environment.
  • Easy to Get the Exact Sizes: The bolts and nuts come in a portable firm clear box with corresponding sizes label. It is convenient for you to put away and store, which allow you to get the one you need quickly, improving your project efficiently..
Check Stock

VIGRUE M6-1.0 x 12/16/20/25/30mm Flanged Button Head Socket Cap Screws 210PCS Stainless Steel 18-8 304 Flange Internal Hex Screws Bolts Nuts Washers Set Kit Full Coarse Thread

  • ✔ Screw Type: Flanged Button Head Screw--ISO 7380-2.
  • Screw Length: 12mm, 16mm, 20mm, 25mm, 30mm.
  • ✔ Package: 210PCS M6 Flange Button Head Socket Cap Screws Nuts wahsers kits.
  • ✔ This kind of screw with low domed button head and a wider flange bearing surface offers good performance, great choice for neat appearance needing..
  • ✔ The flanged button head socket screws are 18-8 stainless steel 304, which offers superior rust and corrosion resistance, with fine workmanship, for a long time use..
Check Stock

M6 Hex Socket Head Cap Bolts Nuts Screws Assortment Set 304 Stainless Steel Allen Socket Drive Machine Screws (M6 Assortment Kit)

  • WHAT YOU WILL GET: Our hex scocket button heap cap screws kit include 10mm,16mm,20mm,30mm,40mm Allen head machine screws, 34 pieces in 5 different dimension,34 pieces hex nuts ,and 1 piece wrench..
  • 304 STAINLESS STEEL :These hex socket head cap screws made of high quality 304 stainless steel. High temperature, corrosion and rust resistance. High quality stainless steel also ensures the durability of the screw,which can be used for a long time without frequent replacement..
  • Screws Standard: This is a metric machine screws assortment kit. The nominal diameter is M6 (6mm), indicating that their screw diameter is M6 (6mm). The thread pitch is 1.0mm, which means that the axial distance between the two adjacent teeth on the thread on the middle diameter line is 1.0mm..
  • WIDE APPLICATIONS:These hex button head bolts and nuts assortment kit serves a wide range of use and for professionals, amateurs, landlords, repairmen, other DIY . The set is perfect to replace broken and missing bolts..
  • PACKAGE:This screw assortment kit packed in a plastic storage case for organization and portability,and comes with a dimension chart for distinguishing different sizes easily..
Check Stock