Reviews Butterfly Sanitary Sample Valve

Hygiena™ UltraSnap™ Surface ATP Test Device 100 Tests

Results in 10 seconds - Get test results in 10 seconds when used with Hygiena's EnSURE Touch luminometer.
Patented Snap-Valve Design - The patented Snap-Valve technology ensures your collected sample remains on the swab during activation. For competitor swabs, the sample surface must break through the foil to reach the chemistry, removing ATP from the collection surface.
Liquid Stable Chemistry - UltraSnap contains liquid-stable chemistry in the patented Snap-Valve bulb. This unique chemistry and design eliminate the need to reconstitute lyophilized pellets, enabling consistent and accurate results.
Easy as Swab, Snap, Squeeze - Using UltraSnap couldn’t be easier. The three-step process for collecting a sample, activating the device, and mixing the sample is so easy, anyone can do it.
100% Recyclable - All Hygiena ATP test devices are 100% recyclable.

【Material】Brass made good quality pedal valve for touchless faucet，pedal control for sink faucet..
【Sanitary】Hands-free provides clean and sanitary washing..
【Convenient】convenient touch free for controlling faucet, use foot to control..
【Easy installation】With the floor screw accessory included. Pipe 1/2-Inch Npt Intlet..
【Application】Hands-free faucet valve for Kitchen, Bathroom Hospital, Medical, Laboratory hand wash. Notes: For the newly installed water pipe for the first time, please drain the first water before connecting the hose to avoid water leakage due to scatter and jam in the faucet core. Please kindly pay attention to the inlet and outlet of pedal valve on photo to avoid wrong assembly which might cause leakage..

Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....

Includes Sampler barrel, 1/2 ltr stainless steel zone sampler, sample collection diverter valve, sample bottle fill attachment, 1 sample bottle and 1 24mm dia. stainless steel innage bob..
Optional adapter to fit Hermetic and Tanktech valves available.

Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
The Trigger style handle butterfly valve - 13 Positions.
Temperature Rating (spec): 15°F thru 200°F.
Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.

Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
DERNORD Trigger style handle butterfly valve - 13 Positions.
Temperature Rating (spec): 15°F thru 200°F.
Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.

Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
304 Stainless Steel Butterfly Valves with Trigger Handles-SS Muti-Position Handle.
All wetted surfaces are sanitary finished to .

Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
The Trigger style handle butterfly valve - 13 Positions.
Temperature Rating (spec): 15°F thru 200°F.
Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.

Includes Sampler barrel, 1/2 ltr stainless steel zone sampler, sample collection diverter valve, sample bottle fill attachment, vapor return hose assembly, 12 sample bottle and 1 24mm dia. stainless steel innage bob..
Optional adapter to fit Hermetic and Tanktech valves available.

.... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....