Reviews Butt Welding Ball Valve

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
  • Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
  • Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
  • Centurion series regulators with Protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate Gas control.
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Material: The body material is brass that brass flowmeter has excellent ductility..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector....
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Material: The body material is brass that brass flowmeter has excellent ductility. Can be used with peace of mind.
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector and the air pipe interface is 1/4in..
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

HVDI Stainless Steel Gas Can, Safety Portable Emergency Gasoline Diesel Can Tank, Backup Thickened Tight Sealed Gas Tank with 3 Handles, Vent and Flexible Spout Kit for Vehicles, Cars, Trucks(5Gallon)

  • ...gh-quality Stainless Steel】The gas can is made of high-quality 304 stainless steel with a thickness of 0.9mm. It is resistant to pressure, high temperature, corrosion, and will never rust. Compared with plastic, stainless steel gasoline tanks are not prone to static electricity, and are safer..
  • ✔【Seamless Butt Welding】The gear-shaped stainless steel cover is equipped with a sealing ring to ensure high sealing performance. The tank body adopts seamless butt welding to make it stronger and never leaks..
  • ✔【Portable Flexible Spout Kit】The built-in filter effectively removes impurities, and you can choose either built-in or external oil guide tube, so you don’t have to worry about losing it..
  • ✔【Humanized Design】The gas tank has 3 handles, which support two people to lift. the stainless steel air release valve can balance the internal and external air pressure, and the oil outlet is expanded to 5cm for quick oil output..
  • ✔【Wide Use and Worry-Free Vouchsafing】This gasoline tank is suitable for various liquids such as gasoline, diesel, gasoline, water, etc. If you want higher quality, easier and more comfortable products, please choose us. Customer Satisfaction is our top priority. Please contact us if you need any assistance..
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock