Reviews Butt Weld Pipe Fitting
Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound
- All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
- Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check StockEmoshayoga Coffee Filter Basket Durable Filter Basket Strainer Stainless Steel Filter Basket Coffee for Pressure Coffee Machine
- PVC for corrosion resistance and less weight than fittings made from metals.
- Basket strainer pipe fitting for adding filtration to a pipe line.
- Socket weld connection option to allow a smooth bore and better fluid flow, and a female threaded option for connecting to male threaded pipe fittings.
- Meets NSF/ANSI 61 standards for potable water use.
Check StockABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
- While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
- [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 8 clamps for larger projects, then joint weld between them.
- [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
- [Contents] Welding accessories set includes 8 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check StockOatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz
- Clear Primer, NSF listed (National Sanitation Foundation).
- Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
- Low VOC (volatile organic compound) solvent cement.
- A clear aggressive primer for use on PVC and CPVC pipe and fittings.
- Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
- Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
- Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check StockExhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip
- 1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
- Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
- 2.00 Inch Diameter Pipe 8.00 Inches Long.
- Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.
Check Stockuxcell Stainless Steel Compression Tube Fitting 1/2 NPT Male x 1/2\ Tube OD
- 【1/2 NPT MALE x Ф1/2 TUBE OD】Tube OD : 12mm(1/2").
- 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
- 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation.
- 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing, convenient installation and maintenance, safe and reliable operation.
- 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel
- 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
- 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
- 【Size】M18X1.5 thread adapter, confirm the product size before buying..
- 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
- 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check StockToolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)
- 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
- 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
- When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
- 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials..
- 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to make sure a firm fixation.
- Use all 16 clamps for larger projects, then perform joint welding between them..
- 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
- meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stockuxcell Stainless Steel Compression Tube Fitting 1/8NPT Male x 3 Tube OD
- 【1/8 NPT MALE x Ф3 TUBE OD】Tube OD : Ф3.
- 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
- 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
- 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
- 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stockuxcell Stainless Steel Compression Tube Fitting 1/4NPT Male x 6 Tube OD
- 【1/4 NPT MALE x Ф6 TUBE OD】Tube OD : Ф6.
- 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
- 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
- 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
- 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock