Reviews Bushing Insulation

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency

  • Keep your skateboard better and more comfortable.
  • Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
  • The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check Stock

Easycargo TO-220 TO-247 Heatsink + Insulator/Mounting kit Screw+Washer+Bushing+Insulator Rubberized Silicone+ Heatsink TO-220 for LM78XX Voltage Regulator Power MOSFET Transistor

  • 10 packs complete heat dissipation set for TO-220 / TO-247 power semiconductor packages.
  • 10pcs silver tone aluminium TO-220 / TO-247 heat sink.
  • 10pcs TO-220 insulation kits: Screw + Washer + Bushing and Insulator rubberized silicone.
  • Size: 0.98x1.34x0.47" / 25x34x12mm (LxWxH).
  • Can be applied for cooling voltage regulators LM78XX, LM317, IRFXXX, TDAXX etc.
Check Stock

Metabo HPT Disc Sander | Vertical | 7-Inch Sanding Disc | 6.2 Amp Motor | S18SB

  • POWERFUL: 6.2 Amp, 900W motor supports a variety of applications including rust and paint removal, wood preparation and finishing, and metallic surface polishing.
  • LIGHTWEIGHT: At only 4.4 lbs, allows maneuverability and lessens user fatigue.
  • DESIGN: Vertically positioned design for improved balance and control.
  • DURABLE: High overload durability prevents burnout during aggressive sanding operations.
  • SAFETY: Dust-resistant bearing chamber, metal bearing bushing, double insulation, and wear resistant tail cover add durability and prolong service life.
  • AIR DEFLECTOR: Prevents exhaust and debris from reaching the operator.
  • GRIP: Elastomer covered pistol-grip and side handles provide a secure and comfortable grip.
  • LOCK: Spindle lock for easy accessory changes. Trigger lock-on button reduces user fatigue during continuous use.
Check Stock

JessEm Model 08350 Dowelling Jig Master Kit, Black (08350-)

  • APPLICATION: Create 1/4, 3/8, and 1/2-inch dowel holes on the end or face of your work piece.
  • MULTIPLE DOWEL HOLE CONFIGURATION: Locations of dowels can be pre-set in 1/8-inch increments, perfect for creating multiple dowel hole configuration.
  • BUILT-IN ALIGNMENT SLOTS: Built-in alignment slot allows you to match up dowel holes that are spaced further apart for perfect aligned dowel holes.
  • STURDY CONSTRUCTION: Constructed of precision CNC machined aluminum, anodized for durability and laser engraved for fast set ups.
  • INCLUDED GUIDE BUSHING CARRIER: Includes 3/8-inch guide bushing carrier with 5 guide bushings, 1/2-inch guide bushing carrier with 3 guide bushings, and 1/4-inch guide bushing carrier with 7 guide bushings.
Check Stock