Reviews Bus Bar System

Victron Energy Lynx Distributor

  • A modular DC bus bar, with locations for four DC fuses..
  • Distributor will monitor the status of each fuse, and indicate its condition with a LED on the front..
  • Part of the modular Lynx distribution system..
Check Stock

Bits & Blocks (Lynx Remix)

  • A modular DC bus bar, with locations for four DC fuses..
  • Distributor will monitor the status of each fuse, and indicate its condition with a LED on the front..
  • Part of the modular Lynx distribution system..
Check Stock

Dell - Dell Dimension E521 System Board

  • ... 4 processors support Hyper-Threading technology. Intel Celeron D processor 325, 330, or 335. NOTE: DellTM DimensionTM 4600C computers with Intel Celeron processors are available only in Japan. L1 cache: 8 KB first-level. L2 cache: 256-KB, 512-KB, or 1-MB pipelined-burst, eight-way set associative, write-back SRAM..
  • System Information: System chip set: Intel 865G. DMA channels: four. Interrupt levels: 24 APIC mode. System BIOS chip: 4 Mb (512 KB). System clock: 533- or 800-MHz quad-data rate..
  • Expansion Bus: Bus types: PCI and AGP. Bus speed: PCI: 33 MHz. AGP: AGP 1X, 4X, 8X. AGP connector: one low profile. AGP connector size: 172 pins. AGP connector data width (maximum): 32 bits. AGP video bus protocols: 4x mode at 1.5 V. PCI connectors: one low profile. PCI connector size: 120 pins. PCI connector data width (maximum): 32 bits..
  • Memory: Architecture: DDR SDRAM. Memory connectors: two. Memory capacities: 128-, 256-, 512-MB, and 1-GB non-ECC DDR SDRAM. Minimum memory: 256 MB. Maximum memory: 2 GB. Memory type: 333-MHz DDR SDRAM (non-ECC). NOTE: DDR 333 memory performs at 266 MHz on 400 front- side bus processors..
  • Drives: Externally accessible: one slimline optical bay. one slimline 3.5-inch bay. Internally accessible: one bay for 1-inch high IDE hard dri....
Check Stock

Heart Horse Bus Bar Terminal Block 1/4 Power Stud Battery Junction Block Post Distribution Block Insulated with Cover DC 48V 150A for Auto Truck RV Boat 1/4 ,Red+Black

  • WORKING RATING - Power stud size: 1/4".Maximum working voltage is DC 48V & up to 150 Amps.The battery bus bar is measured 1.77" x 1.69" x 1.4"..
  • EASY TO USE - Each bus bar with a cover can prevent short circuits and is completely safe.The cable can be installed with a wrench without removing the cover..
  • DURABLE & DEPENDABLE - The bus bar has good electrical conductivity and corrosion protection for durability.Terminal block's material is stainless steel, insulated base..
  • EFFICIENTLY DISTRIBUTE POWER - With these power distribution block, you can organize your wiring cleanly and keep your environment clean and tidy..
  • APPLICABILITY - Battery junction block is widely used in motorcycles, cars, trucks, RVs, etc..
Check Stock

4 Post Power Distribution Block Bus Bar Pair with Cover - Made in The USA - 250 Amp Rating – Marine Bus Bar Automotive and Solar Wiring – Battery Terminal Distribution Block - Set of 2 3/8”

  • Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power..
  • Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 3/8" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy..
  • Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion..
  • Keep Your Wires Neatly Organized- With these power distribution blocks you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood anymore. Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination you can think of..
Check Stock

Dell Optiplex GX280 SDT Motherboard - G8310

  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
  • Genuine Dell motherboard model XF954 for OptiPlex GX280 Tower Cases.
  • Intel 915 Express ChipSet, Socket LGA775 Supporting Pentium 4, Celeron, Prescott Processors up to 3.2ghz, Hyper-Threading Technology Support , 533/800 MHz system bus.
  • 4 Dual Channel DIMM Support for DDR2-400/533, 4 GB MAX system memory , 1 16x PCI-Express Video Slot , Integrated Intel 900 Graphics Accelerator , Integrated 10/100/1000 Lan , Integrated ADI Sound ,.
  • 2 Serial ATA Hard Disk Connectors, One ATA-66/100/133 IDE Hard Disk Connector , One Floppy Connector.
Check Stock

Bopaodao Copper Bus Bar 3mm x 25mm x 5.91 inch / 150mm, 1Pcs C110 Pure Cu Copper Flat Buss Bar Stock

  • 1Pcs c110 copper flat bus bar, 3mm x 25mm x 5.91 inch / 150mm, about T 1/8" x W 1".
  • Copper flat bars are widely used for electrical applications for the high electrical and thermal conductivity. Due to its exceptional strength, ductility and corrosion resistance, copper flat bar is also typically used in architectural applications. Uses of copper flat bar include automotive, construction, machined components, roofing, industrial, electrical, fabrication, engineering, manufacturing, marine equipment, architecture industries.
  • As a factory seller, we would like to accept any customization about the copper bar, including the length, drilling and bending or any other special needs, please contact us.
  • The copper bar is made of 0.999 copper, which is the C110 Cu, we also provide tinned copper bar and Nickel-plated copper bar.
  • Copper bars are also called copper bus bars or copper buss bars. They are made of copper and have rectangular or chamfered (rounded) rectangular cross-sections. (Nowadays, rounded copper bars are generally used to avoid tip discharge). The circuit plays the role of conveying current and connecting electrical equipment. Sometimes it can also be made as crafts or decorations.
Check Stock

8 Terminal Bus Bar Terminal Block 10 Pack Brass Wire Screw Terminal for Car Boat Marine Ground Power Distribution Terminal Block

  • Brass terminal grounding strip bus bar block with 8 screws & 2 Stud.
  • High quality plastics base ensures great mechanical strength and durability.
  • Use M4 screws to fix it in place through the two screw holes on both ends of the terminal.
  • Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc.
Check Stock

12 Terminal Power Distribution Block Bus Bar - Made in USA (Original Cover)

  • INCLUDES BOTH RED AND BLACK: With this 2 pack of 12 point bus bars, you will have plenty of connection points for both positive and negative wiring terminals..
  • IDEAL FOR AUTO AND MARINE WIRING: Wire up to a dozen accessories with this 2 pack of bus bars. Each bus bar includes a cover and a terminal boot to insulate and protect connections for damage and corrosion..
  • MADE IN THE USA: You can be sure you're getting high quality parts that are made right here in the USA. We are USA based, firefighter owned, and we stand behind our products..
  • ORGANIZING MADE SIMPLE: With these bus bars you can finally organize your wiring so it doesn't look like a rats nest under the hood any more..
  • 100% SATISFACTION GUARANTEED: If you have any issues with your order, contact us and we will make it right..
Check Stock

DELL OPTIPLEX GX280 Motherboard 0Y6281 0H8164 0H5354

  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
  • Genuine Dell motherboard model XF954 for OptiPlex GX280 Tower Cases.
  • Intel 915 Express ChipSet, Socket LGA775 Supporting Pentium 4, Celeron, Prescott Processors up to 3.2ghz, Hyper-Threading Technology Support , 533/800 MHz system bus.
  • 4 Dual Channel DIMM Support for DDR2-400/533, 4 GB MAX system memory , 1 16x PCI-Express Video Slot , Integrated Intel 900 Graphics Accelerator , Integrated 10/100/1000 Lan , Integrated ADI Sound ,.
  • 2 Serial ATA Hard Disk Connectors, One ATA-66/100/133 IDE Hard Disk Connector , One Floppy Connector.
Check Stock