Reviews Bumper Panel Plugs

Top Secret 1 1/4\ or 1.25\ Hole Plug 1-1/4\ ID Hole Knockout Locking Plugs for Panels - Nylon Plastic 1.25 Inch ID Round 1-3/8\ Head Diameter - for Panel Thickness .016\ - .125\ (1)

  • 1-1/4" ID Hole Knockout Locking Plugs for Panels - Nylon Plastic 1.25 Inch ID Round 1-3/8" Head Diameter - for Panel Thickness .016" - .125" | Body and Sheet Metal Hole Plug.
  • The wings on these plugs expand against the sides of a hole to lock them in place. These dome plugs are finishing plugs for unneeded or unused holes in chassis or other surfaces. The convex design tapers to a thin edge for a seamless finish. The matte finish head offers a professional and finished appearance..
  • Head Diameter 1 3/8" Height 0.062". For Panel Thickness 0.016"-0.125". Overall Height 0.453".
  • Snap-In plugs electrical knockouts with finger tip pressure - Snap-In plugs electrical knockouts with finger tip pressure.
  • Material: Nylon 6/6 Plastic, Features Expanding Wings. Easy installation Plugs lock firmly into surfaces. RoHs compliant material for electrical applications.
Check Stock

Genuine Yamaha YFZ450R YFZ450X GYTR Plastic Frame Skid Plate 18PF84N0U000

  • Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
  • The extruded U-nuts can be used to replace/fix to the bumper.
  • The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine....
  • Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details).
  • Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION....
Check Stock

Body Groove Delicious Dance Complete Collection

  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" )..
  • 6 different Push pin rivet for many brand vehicles..
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use..
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment..
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover.
Check Stock

GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips , black

  • Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
  • The extruded U-nuts can be used to replace/fix to the bumper.
  • The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement.
  • Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details).
  • Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) 10pcs Plastic Push Clips as pictured.
Check Stock

Rexka Bumper Cover Fender Liner Under Cover Grommet U Nut for Toyota Lexus 90467-05114 Pack of 20

  • Other Names: Lower Panel Fastener, Bumper Cover Clip, Fender Liner U-Nut, Bumper Cover Lower Clip, Pad Clip, Bumper Cover Nut, Side Extension....
  • Black Nylon, Screw Size: M5.5 (#12) Width: 20mm, Length: 36mm Center Of Hole to Edge: 14mm Panel Range: Up To 1mm.
  • Replaces Lexus & Toyota: 90467-05114, Fits Scion: iQ, xA, xB, xD.
  • Toyota:Echo, Highlander, MR2 Spyder, Prius, Prius V, RAV4, Sequoia, Sienna, Tundra,....
  • Fits Lexus CT200h, HS250h, RX300, RX330, RX350, RX400h, RX450h.
  • Positions: Left Front, Left Lower, Right Front, Right Lower.
Check Stock

EAG Rear Bumper Rock Crawler with Parking Sensor Bracket and D-Ring Fit for 18-22 Wrangler JL

  • BACKUP SENSOR MOUNTING - If your Wrangler JL came with factory backup sensors, then they will fit directly into the offroad rear bumper’s sensor mounts. If not, then we provide fill plugs for the bumper..
  • OFF ROAD COMPONENTS - Shackle mounts are welded onto the bumper from the inside and outside for maximum strength. Two 4.75 ton D-ring shackles and black isolators are included. 2" receiver hitch rated 5,000 lbs equipped with safety chain loops..
  • HIGH-QUALITY MATERIAL - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability..
Check Stock

OEDRO Rear Bumper Compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU (2/4 Doors), Full Width Back Bumper w/ D-Rings & Hitch Receiver & Reflective Armor

  • 【Perfect Fitment】OEDRO rear bumper combo is compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU (2/4 Doors) all models.Rear parking sensor, require self-drilling..
  • 【Separated Trailer Hitch】Unlike other rear bumpers, this bumper designed with separated trailer hitch. You can reuse the factory trailer hitch or select higher grade hitch. Special harness plug notch for easy and clean wire routing..
  • 【Stainless Steel Trim Panel】The original silver trim panel can reflect lights, adding extra safety during the night. Or it can be easily removed for customized painting, matching the body color or individuation decal..
  • 【Functional Step Bumper】This back bumper has enough space for a spare tire up to a 32-inch one. Also, it will serve both as a guardrail and anti-slip step pad..
  • 【Tactical 67" Full Length Bumper】Adding an aggressive style to the rear of your Jeep with protection from all the hazards of driving a Jeep the way it was meant to. Hit the trails with confidence and with a bold new look..
Check Stock

Prime-Line MP1569 Sliding Glass Door Bumper, 2-5/8 inches, Heavy Duty Rubber, Black in Color, 2 Piece

  • Constructed of a durable, 90-degree stamped steel bracket and a rubber bumper.
  • Steel components come finished in a corrosion resistant, zinc plated finish and the bumper is gray in color.
  • Designed for use with by-passing door panel to stop primary panel from passing behind secondary panel.
  • Includes installation fasteners and instructions.
  • For further dimensional and specification information, please see the line drawing.
Check Stock

New Grille Primed Shell & Insert Polypropylene + Molding Chrome With Emblem Hole For 2006-2007 Honda Accord Direct Replacement 71122SDAA10 71121SDAA10ZA

  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" )..
  • 6 different Push pin rivet for many brand vehicles..
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily....
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine....
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover.
Check Stock

iJDMTOY No Drill Front Bumper Tow Hook License Plate Mounting Bracket Adapter Kit Compatible With Nissan 370Z Juke Rogue Infiniti FX JX QX G37 Q60

  • Compatible with 2009-2012 Pre-LCI Nissan 370Z or All Nissan 370Z w/ Nismo Package/Bumper, 2011-2017 Nissan Juke, 2014-2016 Nissan Rogue (X-Trail), 2009-2017 Infiniti FX35 FX37 FX50 QX70, 2013-up Infiniti JX35 QX60, 2016-up Infiniti Q60, 2011-2014 Infiniti G37 Q60 Sport Coupe w/ the bumper shown in the gallery picture.
  • No modification required! The billet aluminum rod screws into the original towbar opening to support the number plate instead of drilling into the bumper.
  • Unlike the "copycats" on the market, our license plate relocation panel is made of black powder coated steel instead of aluminum.
  • much stronger, more durable and better prevents the license plate from spinning due to high-speed driving.
  • Panel also comes with 8 different mounting locations to best keep the license plate from blocking intake vents / lights / parking sensors with angle adjustment for plates to follow the curve of the bumper.
Check Stock