Reviews Bumper Light Bracket

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

Bumper Bracket compatible with Chevrolet Avalanche 1500 02-06 Silverado P/U 03-07 Front Right and Left Side Outer Brace

  • Direct Replacement Bumper Bracket Compatible with 2002-2006 Chevrolet Avalanche 1500 / 2500.
  • Direct Replacement Bumper Bracket Compatible with 2003-2006 Chevrolet Silverado 1500 & GMC Sierra.
  • Direct Replacement Bumper Bracket Compatible with 2007 Chevrolet Silverado & GMC Sierra 1500 Classic.
  • Replaces OE Number 15184116, 15184117 & Replaces Partslink Number GM1066159, GM1067159.
  • A high quality, Direct Fit OE Replacement Bumper Bracket, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Bumper Bracket compatible with Chevrolet Silverado 1500 Classic 07 Front Right and Left Side Set of 2 Steel

  • Direct Replacement Bumper Bracket Compatible with 2003-2006 Chevrolet Avalanche 1500 & Silverado 1500 & GMC Sierra 1500.
  • Direct Replacement Bumper Bracket Compatible with 2007 Chevrolet Silverado 1500 Classic / Silverado 1500 HD Classic & GMC Sierra 1500 Classic / Sierra 1500 HD Classic.
  • Direct Replacement Bumper Bracket Compatible with 2005-2006 Chevrolet Silverado 1500 HD & GMC Sierra 1500 HD.
  • Replaces OE Number 12335637, 12335636 & Replaces Partslink Number GM1066147, GM1067147.
  • A high quality, Direct Fit OE Replacement Bumper Bracket, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.
Check Stock

Bumper Bracket compatible with Chevrolet Silverado P/U 03-07 Front Bolt On/Welded Fits 2007 Classic Steel Right Side

  • Direct Replacement Bumper Bracket Compatible with 2003-2006 Chevrolet Avalanche 1500 & Silverado 1500 & GMC Sierra 1500.
  • Direct Replacement Bumper Bracket Compatible with 2007 Chevrolet Silverado 1500 Classic / Silverado 1500 HD Classic & GMC Sierra 1500 Classic / Sierra 1500 HD Classic.
  • Direct Replacement Bumper Bracket Compatible with 2005-2006 Chevrolet Silverado 1500 HD & GMC Sierra 1500 HD.
  • Replaces OE Number 12335636 & Replaces Partslink Number GM1067147.
  • A high quality, Direct Fit OE Replacement Bumper Bracket, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.
Check Stock

RC LED Light Bar Roof Lamp Headlight Tail Light Kit Bumper Light Compatible with Traxxas RC Car Truck Crawler Tamiya Losi HPI Rustler Axial Police Lights (100mm 2 Bar)

  • Color changeable high-intensity LED light kit can be used as headlight, tail light, roof light, front/rear bumper light and police lights..
  • The 2 light bars can both be controlled remotely via your transmitter or the button on the LED controller. 13 switchable light modes and colors changeable. On/off control.
  • Aluminum alloy frame and transparent acrylic protective cover effectively protect the lights from damage and dirt..
  • Input Voltage: 5V~15V, Max Power: 5.6W (when 2 light bar all LED white color).
  • Compatible with nearly all brand RC car truck crawler like Traxxas Tamiya. The light bar can be mount on the body, roof, front bumper, and rear bumper using the included bracket and zip ties.
Check Stock

ALAVENTE 1 Bull Bar Nudge Bar Mounting Bracket Tube Clamp Kit for LED Light Bar / Work Light Black

  • √ 360 Degree Rotation: Durable led light bar roll cage clamps led mount bracket can swivel 360 degree on any Round Tube / Shaped Roll Cage / Roll....
  • √ Heavy Duty Material: ALAVENTE 1 inch led pods lights mount bracket is made of high quality sturdy and light-weighted steel metal material, durable....
  • √ Easy To Install: It is very easy and simple to use our roll bar clamps to install your led lights in less time, and will not drill your perfect....
  • √ Wide Application: Universal bull bar led light bar bracket is widely used on tube clamp and applied to LED light bar for almost all LED....
  • √ Fitment: Apply to most ATV, car, truck, offroad, farm/industries vehicles etc. Fits 25mm(1") round tube/Bull bar/roll cage/bumper..
Check Stock

Hooke Road for Ford F150 09-14 Steel Front Winch Bumper + Rear Bumper Compatible with F-150 2009 2010 2011 2012 2013 2014 (Excluding Raptor) Pickup Truck

  • FITMENT: Both front and rear bumper for Ford F150 2009-2014 (Excluding Raptor) Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors.).
  • DESIGN: Aggressive, angular off-road design and full protection bumpers. Front bumper equipped with a 12000-pound capacity winch plate. Rear bumper compatible with factory receiver hitch. Rear bumper include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for front and back bumper main body.
  • 8-gauge(11/64 Inch) for mounting bracket plates..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 92 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 65 lbs)..
Check Stock

10 UNIVERSAL LICENSE PLATE TAG HOLDER MOUNT MOUNTING RELOCATOR ADAPTER FOR FRONT BUMPER KIT BRACKETS AUTO CAR TRUCK (2 SCREWS + 2 WASHERS + 4 BOLTS +WRENCH & 4 BUILT IN NUTS) Soporte de matrícula (10)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF UNIVERSAL LICENSE PLATE BRACKETS ⇧⇧⇧ ► ???? Qty.: 1.
  • 200 ► ???? Compatibility: It’s a universal design made to fit all make and models with Flat Shape of the Bumpers..
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 6″ x 12″ (USA, CANADA & MEXICO LICENSE PLATE STANDARD) ► ???? Shape of Bracket: FLAT ► ???? Material: ABS Plastic ► ???? Color: BLACK ► ???? Surface Finish: Plastic.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS + 2 WASHERS + 4 BOLTS + WRENCH & 4 BUILT IN NUTS for fast & easy installation (IT’S VERY EASY TO INSTALL LICENSE PLATE ON OUR BRACKET !!! Includes detailed easy to follow instructions – Please see picture # 6) ► ???? You can fit this bracket to your bumper on plastic zipper also. Zipper is not included. (Please see picture # 7).
  • ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side o....
Check Stock