Reviews Built In Handshaking

Parkinson's I - 'Classic' - Essential Tremor Bracelet - Weighted Very Heavy Hand Shaking | Tremor | Spasms (6.0 Small)

  • Handmade by a Certified Reiki Practitioner.
  • GIFT BOX - Arrives in a jeweler's presentation: on a card, wrapped, with red velvety keepsake pouch, and golden metallic gift box.
  • Includes - Metaphysical description of the crystals, along with care instructions.
  • Ideal for those with SLIGHT - MODERATE handshaking tremor. ADLs such as computer mouse, brush teeth, spoon, glass, etc..
  • MEN - THIS IS NOT FOR YOU. Men look at my Heavy 1/2 lb. Weighted Bracelet. Has better profile and more weight..
Check Stock

LC LICTOP 5 Pcs Earthquake Cabinet Latches Safe Push Magnetic Touch Open Door Latch for Kitchen Drawers

  • Product Contain: 5 x Touch Latches with M3 mounting screws.
  • Base Size: 2-3 / 4" x 1-9 / 16" x 5/8" (L * W * T), Strike Size: 1-5 / 16" x 5 / 8" x 3/4" (L * W * T).
  • Material: Made of plastic, thick material, very durable and beautiful appearance..
  • Scope of application: It is suitable for installation in the case of drawers or cabinets without handshaking, for cabinet door rebound, cabinet door....
  • This push-pull design of the magnetic touch door: the sliding door allows the door to pop out when pushing the door, the spring shrinks the clip, and....
Check Stock

Opto 22 SNAP-PAC-R2 - SNAP PAC R-series Rack-mounted Programmable Automation Controller, Analog/Digital/Serial I/O processing

  • Rack-mounted industrial controller with I/O processor included.
  • Two independent 10/100 Mbps Ethernet network interfaces.
  • One RS-232 port with handshaking, suitable for modem communication using PPP.
  • MicroSD card slot for removable data storage.
  • Simple digital functions (no high-speed digital).
  • Full-featured control and HMI software included with purchase.
Check Stock

Key Digital 4K HDR HDMI Extender Transmitter and Receiver Kit with 4K to 1080p Down Convert KD-EX18G

  • Key Features: HDMI Extension over CAT5e/6, HDMI pass-thru port for connecting two displays or surround receiver, optional 4K to 1080p down-convert for....
  • Supported Technology: 4K Resolution Support (signals up to 18Gbps bandwidth) , HDR10 (High Dynamic Range), HDCP 2.2, Deep Color Support, 10G....
  • Benefits: Signal Extension 4K/UHD: Up to 115ft using CAT5e/6 1080p: Up to 164ft, Full Buffer System, Hot Plug Detection Control, EDID Handshaking,....
  • Compatibility: Commonly used with consumer and professional HDMI sources and displays including 4K and 1080p TVs, monitors and projectors, cable and....
  • 3 year limited warranty included. USA based tech support, product design, and engineering..
Check Stock

C2G 03039 DB25 M/M Serial RS232 Null Modem Cable, Beige (6 Feet, 1.82 Meters)

  • 1.5ft female to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable female to femalewith AL foil.
  • DB9 female to female connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter f/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (10 Feet, Black)

  • Simple 10ft null modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • Wired as a 9 pin serial cable male to female port cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • DB9 m/f adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 10 feet long RS232C cable for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Female to Female Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • Simple serial null modem cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded DE9 female RS232 cable with AL foil.
  • DB9 female to female adapter extender equipped with screws on each end to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short null serial cord f/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Male Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)

  • 1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 male RS232 cable with AL foil.
  • DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • Simple Serial Null Modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • (Not VGA-CABLE) Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded rs232 extender cable with AL foil.
  • DB9 male to female crossover adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short DE9 serial extender cord m/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (15 Feet, Black)

  • 15ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female extender with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid extension connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 15 feet long null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock