Reviews Build Clamp

Rockler 52” to 104” Low Profile Straight Edge Clamps for Woodworking w/ Extension Tool, 4 Screws, Nuts, & Bolts - 2 Straight Cut T Track Clamp & Handle for Router or Circular Saw Guide

  • Straight Edge Tool Rockler Clamp System: Make your workshop more versatile with our wood cutter hold down clamp. Get arrow-straight cuts with this straight edge wood cutting equipment. The clamp system comes with 2 clamps, a handle, & an extension tool to join the panel and cut large wood. Connect two 52” sections to create a 104” large straight edge..
  • Versatile Uses: The easy assembled cutting straight edge clamp guide works efficiently to cut plywood, timber, and others..
  • Easy to Use: The straight edge clamps slide along an integral T-track to accommodate nearly any size of material..
  • Premium Build: The straight edge clamp is made with durable construction material to withstand the weight of wood in the workshops..
  • What’s Included: This straight edge clamp kit includes (1) Rockler 52” to 104” low profile straight edge system (1) pair of straight line clamps, (1) handle (1) extension tool. The T track system greatly works when you cut the large wood..
Check Stock

CURT 22325 No-Tool Anti-Rattle Hitch Clamp Tightener for 2-Inch Receiver, Hollow or Solid Shanks

  • QUIETER TOWING. The CURT anti-rattle hitch clamp promotes quiet towing of your trailer by clamping down onto the receiver hitch connection. Warning: Anti-rattle clamp must be used in conjunction with a properly secured hitch pin.
  • EASY TO USE. This easy-to-use anti-rattle hitch tightener requires zero tools for installation. Simply clamp the U-bolt down onto the shank and receiver tube opening and engage the locking lever, Constructed from high-strength steel and lightweight aluminum.
  • VERSTATILE FIT. This anti-rattle device fits virtually any 2-inch receiver tube. It can be used with hollow or solid shank hitch accessories.
  • ADJUSTABLE. To ensure a tight fit over your hitch connection, this hitch clamp is easy to adjust. Simply twist the threaded nut and lever.
  • TOUGH BUILD. This anti-rattle hitch kit is constructed from steel and aluminum, and it comes with a clear coating for lasting corrosion resistance.
Check Stock

Cowbell Mounting Clamp with L rod for Drum Set - ROSS Percussion

  • 5/8" to 1 1/4" multi clamp with adjustable L rod. Adjust length 5.75 to 7.25 inches from the centre of the multi clamp and adjust angle up to 180 degrees..
  • Great for mounting a cowbell, tambourine, jam block or other percussion accessory.
  • Mount to cymbal stands or other suitable drum hardware to customize your set up.
  • Add any percussion accessory that can fit the 3/8" L rod.
  • Durable and build to last. ** Cowbell NOT included **.
Check Stock

4ft Copper Grounding Rod - 3/8 Diameter - Includes Ground Rod Clamp - Great for Electric Fences Antennas Satellite Dishes and Other Grounding and Bonding Needs - Set of 1

  • Includes: One 3/8 Ground Rod (4 feet) and attached binding clamp.
  • Perfect For: Perfect option for grounding Satellite dishes, off-air antenna and electric fence installations.
  • Build: This solid, steel reinforced copper grounding rod is sturdy and provides lightning resistant properties for a safe grounding solution.
  • Easy to Install: Strong enough to pound into the ground and comes complete with a preinstalled electrical grounding rod clamp for seamless integration....
  • Quality Assurance: Grounding rod with clamp Includes a US manufacturers warranty.
Check Stock

Fito 27.2 x 350mm Bicycle Suspension Seatpost Seat Post with Clamp - Black

  • SEAT POST DIAMETER: 27.2MM (O.D.). LENGTH: 350MM..
  • MATERIAL: STEEL SUSPENSION PARTS & ALUMINUM ALLOY(BARREL & CLAMP)..
  • BUILD-IN SUSPENSION WITH CLAMP. FOR BEACH CRUISER BIKES, MOUNTAIN BIKES, TANDEM BIKES, COMFORT BIKES, AND BMX BIKES..
  • PLEASE NOTE THAT THE SUSPENSION IS DESIGNED FOR ABSORBING THE SHOCKS FROM THE ROADS SUCH AS HITTING A POTHOLE. IT'S NOT FOR MAKING THE RIDE LIKE SEATING ON A LIMOUSINE..
Check Stock

BOLANY Bike Seat Posts Bike Suspension Seatpost 27.2 31.6 Alumium Adjustable Seatpost for MTB Road Bike Mountain Bike Fixed Bike Seatpost (Black, 31.6mm)

  • Bike Suspension Seatpost Spring Coil Suspension & Reduce Bump Impact: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks and pain immediately. Rebound force adjustable by tighten or loose the bottom screw. ★Pay Attention to Choose Correct Diameter Size★ to avoid mistake and save your time. Different size is not compatible..
  • Rebound Force Adjustable & Clamp Angle Adjustable: You can adjust the bottom screw to change the spring rebound force fit to your weight to get best riding experience. Saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the clamp, enhance safe and easy to install..
  • Multi Diameter & Colors: We offer 27.2mm, 31.6mm diameters. 3 different colors, black clamp - black body, red clamp -black body, silver head - silver body...
  • How to Choose the Size:1.Check your current seatpost diameter, size marked on lower position of the post (Need to take it out from tube to see the size mark). And buy same size from the option. 2.Measure the inside diameter of the frame tube..
  • Suit for most Fixed Gear bike ,Road Bike ,Mountain Bike , Universal Bikes,etc.It fit for riders weight 50kg/ 110lbs to 180kg/ 397lbs.
Check Stock

Bolany Bike Seat Posts Bike Suspension Seatpost 27.2 31.6 Alumium Adjustable Seatpost for MTB Road Bike Mountain Bike Fixed Bike Seatpost (red, 27.2mm)

  • Bike Suspension Seatpost Spring Coil Suspension & Reduce Bump Impact: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks and pain immediately. Rebound force adjustable by tighten or loose the bottom screw. ★Pay Attention to Choose Correct Diameter Size★ to avoid mistake and save your time. Different size is not compatible..
  • Rebound Force Adjustable & Clamp Angle Adjustable: You can adjust the bottom screw to change the spring rebound force fit to your weight to get best riding experience. Saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the clamp, enhance safe and easy to install..
  • Multi Diameter & Colors: We offer 27.2mm, 31.6mm diameters. 3 different colors, black clamp – black body, red clamp -black body, silver head – silver body...
  • How to Choose the Size:1.Check your current seatpost diameter, size marked on lower position of the post (Need to take it out from tube to see the size mark). And buy same size from the option. 2.Measure the inside diameter of the frame tube..
  • Suit for most Fixed Gear bike ,Road Bike ,Mountain Bike , Universal Bikes,etc.It fit for riders weight 50kg/ 110lbs to 180kg/ 397lbs.
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • ...s To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..
Check Stock

POWERTEC 20308 J Hook Toggle Clamp 451 w Hook Type Draw Latch Pull Action – 375 lb Holding Capacity, 1PK

  • INCLUDES: (1) J-Hook Type Toggle Clamp 451 type.
  • FUNCTION: An essential clamping tool that utilizes a hook type draw latch for straight-pulling action – perfect for table saw stand attachments, racks, gates, smoker lids, creative automotive functions and woodworking projects.
  • BUILD: Made with heavy duty, highly durable and shock resistant cold-rolled carbon steel, enhanced with a protective corrosion resistant zinc plated coating, and paired with a red ergonomically designed anti-slip vinyl hand grip for optimal comfort and control.
  • DESIGN: Features an impressive holding clamping capacity of 375lbs with reliable latch and clamp action, plus a hold-down side mounting with U-shaped clamping profile.
  • SPECS: Clamp Base 1-1/2” x 1-7/8” | Mounting holes: 7/32” spaced 15/16” x 1-3/8” apart | 5/16” J Hook: 5-1/2” (length) with 5/16-18 thread.
  • Ideal for use on doors, machinery, automobiles, jig assemblies and other medium to heavy-duty job applications.
  • Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
  • Features hook shaped clamp rod for clamping any custom latch point.
Check Stock

ZealSound Microphone Arm Stand h1 13 inch + h19 19 inch Black

  • ...hones. (Can’t support Blue Yeti Nano).
  • 【Ture 360° Adjustable & Flexible】This adjustable gooseneck arm rotates freely on the table clamp, to ensure microphone is pointed in an ideal direction. Arm bends back and forth all-round from 0 to 360 degree at the base, movement is solid and smooth..
  • 【Sturdy and Solid Build】0.48'' thick & 13" long stainless steel aluminum alloy gooseneck and the heavy duty metal base ensures your microphone stays firmly in place. Flexible enough to twist yet durable enough to withstand repeatedly bend. Considerate soft cushion of the table clamp can protect your furniture from scratch..
  • 【Easy to Mount and Carry】The super flexible Microphone snake clamp stand is ideal for mounting your microphone anywhere you need it - desk, podium, pulpit, coffee tables, announcers' table, etc. Roll it up easily to save space, and carry freely when traveling and on a business trip. Perfect for recording and live stream on the go..
  • 【Various Using Occasions】 Microphone clip holder, with Heavy Duty table clamp open maximum to 2.4.
Check Stock