Reviews Budget Preamp

Rockville RXM-T2 Micro 2400w 2 Ch Marine/Boat Class D Amplifier 2x600W CEA Rated

  • Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier. Full-Range Class D Amplifier Architecture. Dyno Certified RMS....
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x....
  • Double Sided Surface Mount (SMD) PCB Design. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm....
  • 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB /....
  • Frequency Response: 15Hz - 20KHz. S / N Ratio: 100dB. S/N Ratio: >97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Fuses. Dimensions: (W x H x L) 6.7"....
Check Stock

Kinter PR400 Ultra Compact Phono Vinyl Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with Gold Plated RCA Input and Outputs & Low Noise Operation 12 Volt DC Adapter Included

  • PERFECT FOR PHONO/TURNTABLES: A turntable phono preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp accommodates magnetic pickups with an input sensitivity of 3mV at 50K Ohms..
  • LOW NOISE OPERATION: Offers outstanding value and performance with a Low-Noise Audio Operational Amplifiers. Integrated circuitry accommodates Magnetic Pickups. The output is 2V max (P-P) at 10K Ohms. PLEASE NOTE: The PR400 Preamp should be located close to the source (turntable) to reduce the possibility of unwanted noise and outside interference impacting the signal quality..
  • SIMPLE PLUG & PLAY: The PR400 Mini Phono Preamp has gold plated stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and attach the ground wire from your turntable to the grounding screw found on the preamp. Connect the amplifier or receiver to the RCA outputs of the preamp and you’re ready to spin up some vinyl. Simple as that!.
  • POWER ADAPTER INCLUDED: 12VDC power adapter tested for quiet operation and soft Orange LED Power indicator on the PR400 preamp indicates the unit is powered on and ready to convert signal..
  • GOLD PLATED RCA CONNECTORS: reduces the possibility of corrosion which could cause signal loss and nonlinearity ....
Check Stock

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock

Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w RMS+PA Microphone

  • Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone.
  • Features: Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone. 2400 Watt Peak/1200w RMS. PA Microphone Included..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 100 Watts) at 4 ohms and 1% THD+N..
  • 600 Watts (4 x 150 Watts) at 2 ohms 003c 1% THD. 2 x 300 Watts bridged @ 4 Ohms 003c 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms)..
  • High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH3 & CH4 Low Pass 50Hz - 3KHz. CH3 & CH4 High Pass 15Hz - 1KHzCrossover Bandpass Control. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors.. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Microphone Sensitivity: 100dB @ 1w / 1m.
Check Stock

JOYO Cabinet Simulator Pedal Dual Channel with Clean and Distortion for Electric Guitar Effect (Preamp House R-15)

  • ...c ambience lights bring out futuristic and retro styles, displaying a perfect fusion, will make our soul happy whether are jamming in the bedroom, studio or on the stage..
  • JOYO is over decade of brand reputation, provide worry-free after-sale service. with the most popular budget pedals, amplifiers, wireless systems, controllers, metronomes, tuners winning the love of global guitarists and inspiring people's music dreams..
  • Before playing, please make sure the guitar is fully connected with the pedal. in order to make JOYO pedals work properly and avoiding unexpected noise, we recommend you to purchase an extra JOYO original power adapter, or choose the other reliable brands and make sure it meets the working current requirement of single pedal..
Check Stock

Ibanez AEG62 6-String Acoustic-Electric Guitar (Right Hand, Natural Mahogany High Gloss)

  • Preamp: A nyatoh neck and walnut fingerboard offer stellar playability and response, and an Ibanez T-Bar II bottom saddle and AEQ-TTS preamp deliver beautifully articulated amplified tone.
  • Construction: The AEG62 features a Sapele construction that results in a rich, bottomless low end with a lively midrange.
  • Lightweight: With a shallow body depth, this slimmer acoustic is lightweight and easy to play.
  • Features: The AEG62 also features a smooth, deep cut that gives you access to those higher notes in the neck. A new easy-to-read onboard tuner with LCD (liquid crystal display) is located on the preamp.
  • AEQ-TTS Preamp with Onboard Tuner: The small and simple preamp has only two control knobs, volume and shape. This at-a-glance tone control offers natural acoustic sound in the center position. It allows players to adjust the tone easily and enables them to go from low, fat and powerful tones to a bright and crisp sound while adjusting only one knob.
Check Stock

Comica LINKFLEX AD2 XLR/ 6.35mm Audio Preamp Adapter with 48V Phantom Power, Real-time Monitoring, Guitar Interface Microphone Preamp for iPhone, IOS, Android, Tablet and DSLR Cameras

  • 【Stable Connection】As a high-quality microphone preamp, the LINKFLEX.AD2 allows you to use professional stage microphones or high-end studio microphones, guitar to create music with your mobile IOS or Android devices..
  • 【Universal for Smartphones and Cameras】LINKFLEX.AD2 mic preamp is an easy solution to connect any professional microphones to iPhone, iPod touch, or iPad MAC/PC and Guitar and Android device.It is also a great preamp for DSLR cameras Canon, Nikon cameras. NOTE: For iPhone7 or above, you need to use the iPhone ORIGINAL lightning adapter..
  • 【“Phone”/ “Mic” Monitoring Switch】With 1/8” headphone output, this camera preamp can be monitor the sound of the Phone/ Mic. “Mic” means real time monitoring the sound of the microphone, and “Phone” means playback the sound you recording in your phones..
  • 【Gain-Control Adjustable】The gain control thumbwheel is easy to set precise levels,if you want the better video effects, you can dial the wheel of dslr preamp to an appropriate position while recording. You also can monitored the processed sound through a 3.5mm headphone..
  • 【48V Phantom Power Output】With the optional 48v phantom power (provided by 9V battery), LINKFLEX.AD2 microphone preamplifier supports any XLR conden....
Check Stock

Phono Turntable Preamp, Phonograph Preamplifier with RCA Input, RCA/TRS Output, Phono Preamp for Turntable Record Play with 12 Volt DC Adapter

  • Convert Phono Signal：The Turntable Preamp Converts phono signals to line level for better sounding audio and volume.This state-of-the-art phono preamp can accommodate all magnetic pickups..
  • Low Noise Operation: The Turntable Preamp offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers.Make your vinyl records deliver sound exactly as it’s read from your turntable’s needle..
  • RCA Input & RCA /TRS Output: This Mini Preamp has stereo RCA inputs , stereo RCA and TRS outputs. Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA/ TRS outputs(DC 12V Adapter is included)..
  • Simple Plug & Play:Connect any Phono Turntable Preamps to modern sound equipment without specialized phono input for amplifying music.Simply hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time..
  • 1 Year Warrranty: We guarantee this Electric Phono Preamplifier with both a 30-day, no hassle money back return policy and a 1 year manufacturer’s guarantee..
Check Stock

ART Precision Phono Preamp

  • Connect any turntable to a wide variety of audio systems. Perfect for DJs and vinyl enthusiasts.
  • Moving Coil/Moving Magnet switchable input.
Check Stock

Better Sound from your Phonograph: How come? How-to!

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check Stock