Reviews Bsp Taps

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

Brass Ceramic Stem Disc Cartridge Faucet Valve Replacement Quarter Turn 1/2\ for Bathroom Kitchen Tap (1 Pair Hot & Cold)

  • Solid brass body and stem. 20 teeth on spline (top of stem) for handle, stem drilled with M4 threaded hole..
  • Clockwise (Blue) and Anti-clockwise (Red) to turn the tap on..
  • Rubber O ring at the bottom, with threaded collar..
  • Fit for taps of basin in bathroom, kitchen, etc. Suitable for both cold water and hot water..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Grill Parts Zone Replacement Heat Plate for Backyard Home Depot Lowes BGB390SNP BGE530PSP BGE530BSP and Dyna-Glo DGB390SNP DGE486BNP DGE486BNP-D Gas Models

  • Fits Backyard Grill models: BGB390SNP, BGE530BSP, BGE530PSP.
  • Fits Home Depot models: BGE530BSP, BGE530BSP, BGE530PSP.
  • Fits Lowes models: BGB390SNP, BGE530PSP, BGE530BSP.
  • Fits Sams models: BGE530BSP, BGE530BSP, BGE530PSP.
  • Fits Dyna-Glo Models: DGB390SNP, DGE486BNP, DGE486BNP-D, DGE486BSP, DGE486BSP-D, DGE486GS, DGE486GSP-D, DGF486GSP, DGF487GRP, DGF530SRP, M486BBDG14,....
  • Compatible Part Numbers : 104-13003, 105-13003, DGBGHP1, GHP104-13003.
Check Stock

Grill Parts Zone Replacement Heat Plate for Lowes BGB390SNP BGE530PSP BGE530BSP Dyna-Glo DGE486BSP DGE486BSP-D DGE486GS Backyard & Home Depot 3-PK Gas Models

  • Fits Backyard Grill models: BGB390SNP, BGE530BSP, BGE530PSP.
  • Fits Home Depot models: BGE530BSP, BGE530BSP, BGE530PSP.
  • Fits Lowes models: BGB390SNP, BGE530PSP, BGE530BSP.
  • Fits Sams models: BGE530BSP, BGE530BSP, BGE530PSP.
  • Fits Dyna-Glo Models: DGB390SNP, DGE486BNP, DGE486BNP-D, DGE486BSP, DGE486BSP-D, DGE486GS, DGE486GSP-D, DGF486GSP, DGF487GRP, DGF530SRP, M486BBDG14,....
  • Compatible Part Numbers : 104-13003, 105-13003, DGBGHP1, GHP104-13003.
Check Stock

HUBEST 7 pcs of Airbrush Adaptor Set Airbrush Fitting Airbrush Connector kit for air Compressor & Airbrush Hose

  • 4. 1/8" Male to 1/4" Female BSP Standard. 5. 1/4" Female to 1/8" Male BSP STandard..
  • 6. 1/4" Female to M5*0.5 Male. 7. 1/8" Male to M5*0.5 Female..
Check Stock

Master Airbrush Brand 100 Pipette Eyedroppers for Liquid Transfer and Airbrush Paint

  • Master Airbrush Brand Airbrush Fitting Conversion Adapter for Badger Airbrushes.
  • Converts a Badger airbrushes male M5 0.5 mm thread size to standard 1/8" BSP male thread size for easy connection to 1/8" BSP air hoses.
  • Adapter has 1/8" BSP male threads on the outside and Badger size female threads on the inside.
  • The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata.
Check Stock

NEIKO 00908A Tap and Die Set | 76 Piece Threading Tool | Standard & Metric |Alloy Steel | Hexagon T Type Wrench | SAE and MM

  • [APPLICATION]: Taps and dies are tools used to create purpose screw threads, which is called threading. Use the tap to cut threads on the holes where threads fasteners are positioned and use the die to cut threads..
  • [DURABLE]: Tap and dies are constructed of durable alloy steel for a long life to build new tools or repair damaged and worn threads..
  • [SAE & METRIC]: 34pc tap & 34pc die: M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1, M9x1, M10x1.25, M10x1.5 ,M11x1.5, M12x1.5, M12x1.75, M8x1.25, M9x1.25.
  • [SIZES]: 4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC, 10-32VNF, 12-24UNC, 1/4-20UNC, 1/4-28UNF, 5/16-18UNC, 5/16-24UNF, 3/8-16UNC, 3/8-24UNF, 7/16-14UNC.
  • [SIZES]: 7/16-20UNF, 1/2-13UNC, 1/2-20UNF, 1/8-28BSP, 1/8-27NPT | 2pc screwdriver pitch gauge, 1pc screwdriver, 2pc T type tap wrenches: 1/4" and 1/2" capacity.
Check Stock