Reviews Brass Power Valve

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Milton S-437 TR VC 2 Screwdriver Type Valve Cap - Box of 5

  • Nickel plated brass, screwdriver type, TR VC 3.
  • Built in valve removal slot for easy installation and removal of valve core.
  • Tire valve cap TR VC2 Nickel plated Screwdriver type Brass Skincard.
  • Tire valve cap TR VC2 Nickel plated Screwdriver type Brass Skin card.
Check Stock

B BURCAM QUALITY PUMPS SINCE 1978 300400ZN Emergency Water Powered Back-up Sump Pump

  • BACK-UP SUMP PUMP: Emergency water back-up system that operates without a battery or power to protect your home from flooding in case of power failure or pump failure..
  • EMERGENCY PUMP: It does not require electricity or a battery to function, but is powered by your municipal water supply. It is easily connected to the municipal water supply line and to your existing conventional sump pump discharge line..
  • EASY INSTALLATION: No electricity, no battery, no maintenance required..
  • POWER OUTAGE PEACE OF MIND: In the event of a power outage or an electric pump failure, the rising water in the sump will activate an automatic control valve which will start the system. Water under pressure will flow through the Contractor Sump Buddy which creates a vacuum and causes the water in the sump to be drawn out into the discharge line..
  • HEAVY DUTY BRASS CONSTRUCTION: The pump and valve are made of brass for strength and longevity..
  • PUMP PERFORMANCE: The maximum lift is 15 feet and the moves up to 1200 GPH..
Check Stock

KLKL Standard Trumpets Trumpet Instrument Gold Lacquer Rotary Valve Type Bb Cornet Bore Size 11.66mm

  • Lacquered Brass Body is produced using state of the art technology to ensure an instrument of the most accurate scale and playability.
  • Cornet,Tone:Bb, Rotary valve type. Gold brass leadpipe.
  • The speakers are made of reliable high-quality materials. The horn valve can be precisely connected to each tube, providing extremely strong air tightness and playability..
  • Standard trumpet, the brass tube body is sturdy and durable, the painting process is excellent, the sound is excellent and bright, the penetrating power is strong, the impact is strong, and the vibration is excellent..
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Carbon Steel Mini Needle Valve - with Round Knob 1/4\ NPT 6000 PSI DAIRAZAN

  • 【Size】Male Thread 1/4" NPT x 1/4" NPT for connecting female threaded pipe fittings..
  • 【Material】Made of solid brass for strength, corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is nickel plated so that it is anti-rust and corrosion resistant..
  • 【High Quality】High pressure brass needle valve, stable smooth delicate tightness practical. The brass needle valve is clean and bright inside, and the ruler can be controlled accurately. Its exquisite processing, can withstand greater pressure than other types of valves, strong connection, high pressure resistance, good sealing performance and repeatable installation..
  • 【Easy to Use】The product is easy to install and maintain, and it is safe and reliable to work. If you need a long time and stable control, it is best to use it with a regulator..
  • 【Widely Applications】Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path. Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electri....
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • ...male BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
  • 【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..
Check Stock

Mudder 2 Pieces 8.25 Inch Tire Valve Extension,Flexible Tire Valve Adaptor and 2 Pieces 90 Degree Tyre Valve Extension Adaptor for Universal Rv Cars Truck Motorcycle Bike Scooter

  • Package include: you will get 4 pieces tire valve extension adaptors in your package, 2 pieces rubber tire valve adapter and 2 pieces 90 degree brass....
  • Rubber extension adaptor: it is made of durable rubber with metallic valve end, the length of tire valve extension is approx. 210 mm/ 8.25 inch.
  • Brass tire valve extension adapter: the tire valve extension adaptor is made of brass and comes with metal dust cap, strong and long lasting, the....
  • How to use: rubber adaptor: one end can be connected on valve stem and the other end can be taken as replacement of the original valve stem.
  • Multiple usage: valve stem extension fit all passenger cars, light and heavy trucks, motorcycles and recreational vehicles with standard tire valves,....
Check Stock