Reviews Brass Pex Valve

PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water

• ...fely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole..
• HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper saddle valve is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly..
• LIMITED LIFETIME WARRANTY. For use with 3/8” to 3/4″ copper pipe. 1/4 inch outer diameter outlet saddle valve. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Limited lifetime warranty. Choice Hose and Tubing part number 509 5110K..

American Standard RU101SS Flash Shower Rough-in Valve with Universal Inlets and Outlets with Screwdriver Stops, Unfinished

• Choice of Connections: Fast and easy installation without adaptors reducing leak points.
• Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub outs.
• Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water.
• Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation.
• Test Cap: Allows valve body to be tested and flushed without the presence of the valve cartridge.
• Can be tested using test cap with air (200 psi) or water (300 psi).
• Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws.
• Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
• Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation.
• It can serve as mounting support for thin wall installations.
• Back to Back Capability: Hot and cold can be reversed quickly and easily.
• Wide Rough in Range: From 1-3/4 Inches to 2-3/4 Inches from finished wall to the back of the valve.
• Includes Screwdriver Stops for easy servicing at the valve.

Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers

• 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
• 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
• Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
• 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
• 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....

Angle Stop Valve 3/8-in Compression x 1/2-in Pex , 1/4 Turn Lead Free Chrome Plated Brass Shut Off Angle Valve for Faucet or Toilet Installation (4-Pack))

• Pack of 4 Pcs of 1/4 Quarter Turn Lead Free & DZR Solid Brass 3/8-in Compression x 1/2-in PEX Shut off Ball Valve.
• PEX Compatible with all types and brands of PEX Tubing B: Watts,Everhot,Viega,Zurn,Nibco,Bow,etc..
• Just crimp to create a watertight seal, or use the PEX Copper ring..
• IAPMO R&T Certified: NSF/ANSI 61 & 372 & 14, ASME A112. 18. 1/CSA B125. 1.
• Suitable for Using in Hydronic Heating as well as in Potable Water ..

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

• SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
• ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
• VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• can be installed horizontally or vertically.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
• SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.

DELTA FAUCET 441-WH-DST, 3.00 x 13.00 x 21.80 inches, White

• Sleek design with the charm of simplicity.
• DURAMOUNT Mounting w/ 2-1/2-Inch max deck thickness.
• Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa, Fittings Type: 3/8" compression fittings, Supply Lines: Included InnoFlex Pex-C Supply Lines, Valve Type: DIAMOND Seal Valve.

Cash Acme 3/8 Inch HG135 Thermostatic Mixing Valve with Compression Connections and Integral Checks Brass Plumbing Fitting 25686

• CASH ACME THERMOSTATIC MIXING VALVE: This Cash Acme Thermostatic Mixing Valve is a sleek and compact under-sink temperature mixing valve designed to help prevent scalding.
• COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
• DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
• EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• remove using a disconnect clip or disconnect tongs.
• SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

(30) 1/2

Cash Acme 3/8 Inch HG145 Thermostatic Mixing Valve with Compression Connections Tee Elbow and Integral Checks Brass Plumbing Fitting 24525

• CASH ACME THERMOSTATIC MIXING VALVE: This Thermostatic Mixing Valve is a point-of-use thermostatic mixing valve designed to assist in the prevention of scalding.
• this valve reduces the outlet flow to a trickle in the event of cold water supply failure.
• COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
• DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
• EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• remove using a disconnect clip or disconnect tongs.
• SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

Moen Brass Commercial 1/2-Inch PEX Posi-Temp Valve 8373HD

• Posi–Temp pressure balancing control valve helps maintain water temperature control in the shower.
• Heavy–duty brass single handle tub/shower cartridge.