Reviews Brass Cnc Machining Part

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Prolinemax 2 Pc Adjustable 1/2\ T-Slot Hold Down Clamp 3/8\-16 Clamping Range

  • Aluminum alloy and brass materials, CNC machining..
  • Three-step/five-step adjustable, rubber feet with rubber anti-skid pads, stable and non-slip..
  • Both thin and thick plates can be clamped, and the maximum material can be pressed down to 10 cm..
  • Application: compression clamp, T-shaped rail clamp, woodworking table clamp.
Check Stock

Boat Plugs 1/2 Inch Npt Solid Brass Boat Drain Plug, 2 Pack Garboard Drain Plug Boat Drain Plug Fits Most Boat Hulls (1/2 Inch NPT)

  • QUALITY: drain plug for boat made of high quality solid brass with high precision CNC machining for superior corrosion resistance.
  • HIGH PRECISION: drain plug boat Fits all standard 1/2" NPT thread drain plug sockets. Precise threads and dimensions to fit most boats.
  • TIGHTNESS: boat plug Machined from whole brass rod for excellent sealing performance Lasts much longer than hollow brass.
  • 100% NEW: boat drain plugs are sold by the pair, factory direct, quality guaranteed.
  • EXCELLENT SERVICE: HAPDEN quality assurance and lifetime warranty. If you have any questions about our products, please feel free to contact us and we will get back to you within 24 hours..
Check Stock

Milspin CNC Engraved Slide Back Plate for Glock Gen 1-5, Glock 17 19 21 22 23 24 26 27 29 30 31 32 34 35 36 37 38 39 40 41 | I'm Your Huckleberry (Black on Brass) | Made in USA | Glock Accessories

  • Fits ALL Glock Models and Generations 1-5 and 19X, EXCEPT the G42, G43, G43X, and G48..
  • Made from 360 brass which is a free-machining alloy that is primarily composed of copper and zinc. It has a high machinability rating, good corrosion resistance, and is used for parts that require a combination of strength, ductility, and aesthetic appeal. 360 brass has a bright gold-like appearance that is often used for decorative purposes..
  • All Milspin products are CNC engraved. CNC milled engravings are made by using computer-aided design (CAD) software to create a digital model of the engraving, which is then translated into a set of instructions that a CNC machine follows to precisely mill the design into the material. The process involves using a cutting tool, such as a rotating end mill, to remove material from the surface of the material, creating the desired pattern or design..
  • Finish: Cerakote ceramic coating. Cerakote coatings offer several benefits, including enhanced durability, corrosion resistance, and chemical resistance. They also provide improved lubricity and reduced friction, making them ideal for high-wear applications..
  • Veteran crafted in the USA. Support American manufacturing and veterans who have served our country with the purchase of this p....
Check Stock

Musiclily Ultra 52.5mm Full Solid Brass 6-Screws PRS-Style Tremolo Bridge Knife Edge for Strat Style Electric Guitar Gold

  • Fits many Mexico/Asian made Strat style guitar's tremolo bridges with 52.5mm (2-1/16") string spacing and screws spacing, like Fender Mexico, Fender Japan, thick body Squier Strat etc. Please check your guitar bridge size before buy, this bridge will NOT fit thin body guitar like Squier Bullet and Affinity..
  • String spacing: 52.5mm (2-1/16" ), screw spacing: 52.5mm (2-1/16"), 6 screws mounting style..
  • Knife edge + notched mounting screws design will give you a better tremolo system, 41.5mm (1-41/64") solid brass full block and steel push-in tremolo arm will bring more sustain.
  • Solid brass saddle, plate and full block, stainless steel mounting screws, all of these are made with precise CNC digital controlled machining technology.
  • Includes full bridge assembly set and mounting accessories.
Check Stock

sjlerst RC Spring RC Accessory, Upgrade Shock Absorber, Car Shock Absorber, Front&Rear for Axial for SCX10

  • ✿【Nice Replacement Accessories】☀Nice replacement accessories for the old or broken one..
  • ✿【Fine In Workmanship】☀Fine in workmanship and high in quality..
  • ✿【Double Spring Design】☀Double spring design for best performance..
  • ✿【CNC Machining Aluminum】☀CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance..
  • ✿【Widely Used】☀Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car..
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

VIBORG Deluxe Adjustable Extra-Long Solid 304 Stainless Steel Extra-Thick Casting + Rubber Heavy Duty Door Stopper Wall Mount Mounted Built in Door Doorstop Bumper Door Stop, RS-38 (1)

  • Solid SUS-304 stainless steel construction HEAVY DUTY & machined via fully automated precision CNC (Computer Numerical Control) machine tool to ensure quality stability and durability of the product..
  • With fully automated precision CNC machining surface finish, the product has a perfect smooth surface that reflects light in a highly regular way, the appearance of the product thus looks very aesthetically pleasing.
  • Top quality product. Will not rust, remains stainless forever--a durable quality product that can last a lifetime! Adjustable height: Min. height: 75mm, Max. height: 110mm, product net weight: 190 gram.
  • Instructions : Use a flat-blade screwdriver to fix the brass bolt firmly after you adjust the height of the door stopper..
Check Stock

BOOLIT EYE .22LR Special Laser Boresighter End Barrel Laser Bore Sight Accurately and Easy to Fit Revolvers Pistols Rifle and Air Guns

  • Laser standard: Class IIIA red laser, less than 4.9mW and wavelength is 650nm. Its basic parameter conformed to the correlation application standard..
  • Model: This is a special laser bore sighter for the .38SPL caliber. It is directly into the barrel, so easy and very accurately..
  • Advantage: All made of brass, so it is sturdy and durable. Also it is beautiful and it won't damage the barrel. The portable packing boxes that you can carry with you..
  • As a gift: Real brass material after CNC precision machining and gilded treatment. Perfect for the gold cartridge and exquisite packaging. It is perfect as a gift for a friend or elder..
  • Spare parts: Equipped with 3 set of batteries and multiple spare O-rings. You don't worry about the working time not enough..
Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock