Reviews Brake Tools

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • 1.【Brake Spring Tool for Safely Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • 2.【Time-Saving and Efficient Truck Air Brake Tools】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. L....
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

OTC 5054 Air Brake Service Kit for Class 7 and Class 8 Vehicles

  • OTC's Air Brake Service Kit contains the tools needed to remove the slack adjusters and push-rod clevis pins used in the S-cam brake systems of Class 7 & 8 vehicles.
  • Set works on manual or automatic slack adjusters.
  • Included tools: No. 5055 and 5056 Slack Adjuster Pullers, and No. 5057 Brake Clevis Pin Press.
  • Sturdy blow molded storage case keeps contents protected and secure when not in use.
  • Crafted from high-grade materials to ensure quality performance over the lifetime of the tools.
Check Stock

OEMTOOLS 25252 Automatic Slack Adjuster Release Tool and Wrench, Slack Adjuster Tools for Big Truck, Trailer Brake Adjustment Tool, Hand Tools for Mechanics

  • SLACK ADJUSTER TOOLS: Our slack adjuster tool set is designed to aid in the installation and servicing of Meritor-brand air braking systems on heavy-duty trucks, long-haul trucks, and trailers.
  • Brake adjustment tool simplifies brake service.
  • CONVENIENT FEATURES: The slack adjuster wrench tool comes with a 5/16 inch double-square head and a built-in offset ratcheting mechanism that provides extra clearance for hands and knuckles.
  • Ratcheting brake tool speeds up installation and service.
  • EASY TO USE: This Meritor slack adjuster features a side-mounted forward and reverse lever, allowing for quick direction changes without removing the brake adjuster tool from the slack adjuster.
  • Convenient hand tools for any mechanic tool set.
  • HANDS-FREE OPERATION: The fork-end slack tool fits securely under the pull pawl for hands-free operation to release the tension button.
  • Truck slack adjuster fork-end tool retains tensioner release button securely without prying or causing damage.
  • COMFORTABLE TRUCK BRAKE TOOLS: Our double-square offset reversible truck tool wrench comes with an EZ grip handle fo....
Check Stock

ARES 70924-8-Piece Brake Pad Gauge Tool Set 20-Gauge Sheet Metal - Corrosion Resistant High Visibility Powder Coat Finish

  • SET INCLUDES: This Brake Gauge Tool Set includes eight brake gauges designed to help identify if a vehicle has sufficient brake lining in the following metric/SAE sizes: 2mm (0.0787 inches), 3mm (0.1181 inches), 4mm (0.1575 inches), 5mm (0.1969 inches), 6mm (0.2362 inches), 8mm (0.3150 inches), 10mm (0.3937 inches), and 12mm (0.4724 inches)..
  • QUALITY: These brake gauge tools are constructed of 20-gauge sheet metal with a red, yellow, or green durable powder coat for easy identification of brake lining that needs to be replaced and are held together by a heavy-duty rivet, so you'll never have to search for a piece of this handy set..
  • APPLICATION: This brake gauge set can be used to quickly and easily identify brake lining that needs to be replaced in any vehicle, from light cars and trucks to heavy duty transportation vehicles. The green brake gauges indicate that the brake lining is in good condition. The yellow indicate that service may be needed, and the red indicate that the brake pads or shoes should be changed immediately..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 8-Piece Brake Gauge Tool Set, simply conta....
Check Stock

RW 0415-202 Front ATV Brake Pads Fits Polaris

  • ...ide 2015-2016/FLTRX Road Glide Custom 2010-2012/FLTRXS Road Glide Special 2015-2016/VRSCAW V-Rod 2007-2009/VRSCD Night Rod 2006-2008/VRSCDX ANN V-Rod Anniversary Edition 2012/VRSCDX Night Rod Special 2007-2016/VRSCF V-Rod Muscle 2009-2016/VRSCR Street Rod 2006-2007/VRSCX V-Rod 2007.
  • Package Includes: 2 FA409HH Front Brake Pads and 1 FA409HH Rear Brake Pad..
  • Easy Installation: We have tested so many times before sales. Brake Pads are easy to install with simple hand tools in just minutes - no special tools required for installation..
  • Material: Brake Pads are made of high quality sintered metal, Brake safety is certified by ECE R 90 and tested by TUV. Ultra-high friction HH grade brake pads have braking performance unbeatable by similar products in the market..
Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

  • DUAL BRAKE TOOL SET: This 30-piece brake kit from Orion Motor Tech includes all the necessary parts for adjustment, removal, and installation of dual brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters..
  • NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic..
  • EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
  • PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
  • SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensur....
Check Stock

Fauvipone 5081 S-Cam Air Brake Spring Compressor Tool, Brake Shoes Installer Tool, Compatible for Heavy-Duty Tractors and Trailers Diesel Drive Semi-Truck Replace Brake Shoe

  • ✔【Brake Spring Tool for Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • ✔【Hook Design】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • ✔【Better Material】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable.
  • ✔【Easy to use 】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • ✔【100% GUARANTEE】All products have a lifetime warranty, Every time you buy, you will enjoy the fast and convenient FBA service. Contact us if you notice any questions about product. We'll try our best to solve your concern as soon as possible..
Check Stock

OEMTOOLS 25136 One Man Brake Bleeder & Vacuum Pump Test Kit Useful Tool for Automotive Tune-Ups Diagnosis & Testing One-Person Brake Bleeding

  • WIDE APPLICATION: This brake bleeder kit is ideal for a wide variety of automotive applications, including bleeding brake fluid and changing power....
  • VACUUM BRAKE BLEEDER: With the hand vacuum pump, there's no need to have an assistant in the car pressing the brake during brake bleeding.
  • SAFE BRAKE SYSTEM BLEEDING TOOLS: Our brake fluid bleeder kit is the safest, easiest way to bleed brakes without an assistant.
  • VERSATILE VACUUM BLEEDER: Works on any kind of vehicle with bleeding screws.
  • Great automotive and motorcycle brake bleeder kit.
  • Vacuum gauge scaled in inches and centimeters of mercury (Hg).
  • (2) lengths of brake bleeder hose (2 foot long 1/4 inch....
Check Stock

cciyu Front and Rear Carbon Fiber Brake Pads Motorcycle Motorbike Replacement Brake Pads Fit for Polaris Ranger 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014

  • FITMENT: Replacement Brake shoes fit 1986 1987 1988 for Kawasaki Bayou 185 KLF185A, 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 for Kawasaki Bayou 220 KLF220A, 2003 2004 2005 2006 2007 2008 2009 2010 for Kawasaki Bayou 250 KLF250A.
  • QUALITY :Brake shoes are made using either high pressure die cast aluminum platforms or steel platforms with bonded brake linings. All shoes are radius ground and edge trimmed and also feature lead in and lead out chamfer at lining ends and original equipment style brake shoe spring.
  • ADVANTAGES: More stopping power, Quieter and Longer time service.
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
  • NOTICE - Please check the description and compatibility chart to verify the fitment before your purchasing.
Check Stock