Reviews Brake Press Machine

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

EVERIE Sliding Coffee Pod Storage Drawer Organizer with Rollers & Brake Compatible with 42 Keurig K Cup Pods 3.7 High

  • Why Rolling Drawer - Most cabinets are 18" from the counter-tops making it difficult to open the brewers' lids while sitting on a drawer. A sliding....
  • Easy to Use - Simply press the ergonomic button to release the brake and move. And simply release the button to feature the brake..
  • Pods Don't Fall Off - Up to 42 pods hang in the pre-cut slots so they don't fall off or get stuck and very easy to take in or out..
  • Sold Frame - Enhanced structure keeps the drawer strong enough to carry the heaviest brewer such as K575. The whole unit is 13.4'' wide by 16.9'' deep....
  • Easy to Refill Water Tank / Reservoir - Just press the button and pull the coffee machine out and then refill..
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ✔【Sturdy Material】: Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, not easy to deform, durable for long time use. Ergonomically designed reinforced handle, efficient, Comfortable & non-slip. Perfect Father's Day Gift.
  • ✔【Universal Disc Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
  • ✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for mos....
Check Stock

HauSun Brake Caliper Press Tool - 360 Degree Car Adjustable Ratchet Piston Spreader Tools Set for Single Twin Quad Piston Disc Brake Repair Replacement

  • 【Main Function】This Brake Caliper Press is professional for automotive brake caliper piston adjustment. Works on single, twin and quad pistons,as well as single and twin piston floating calipers..
  • 【360° Ratchet】Brake Repair Brake Spreading Tools adopts a full 360 degree swing ratchet design so that the spreader may be placed at any position. And your hands will not get fatigued from the constant squeezing..
  • 【Easy to Use】This Brake Caliper Piston Expander is very easy to operate. Swing the long lever handle to expand and retract the two spreading plates, and the positive and negative regulation is realized by flipping the reversing switch on the ratchet..
  • 【Sturdy Material】This Brake Caliper Compressor is constructed of heavy duty carbon steel. The spreading plates with 1/8" thickness steel, high strength, not easy to deform..
  • 【Product Size】This Brake Caliper Press Tool is a must-have tool for doing brake pad replacement, changing the brake, resetting the piston, and doing other brake works .Fully retracted: 1.57”, Fully expanded: 2.72”.
Check Stock

RULLINE Heavy Duty Brake Caliper Press Tool Disc Brake Pad Spreader Piston Compressor Tool Universal Fit Compatible with Car Motorcycle

  • Material: THOROAD Brake Caliper Press Tool uses high quality spreading plates with 1/8" thickness steel,corrosion resistance, economical and....
  • Convenience: THOROAD Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also....
  • Application: THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install,....
  • Size:The brake caliper press is equipped with two groups of push plates,the size is 7.04x2.36 inches and 4.57x2.2 inches. The extended reversing lever....
  • THOROAD after-sales team:We always strive to give you the best quality Outdoor cross-country equipment for thrills and also pay more attention to your....
Check Stock

Mastercool 43050 Air Powered Brake Caliper Wind Back Tool Kit, 1 Pack

  • PNEUMATIC SINGLE PISTON PRESS SHAFT OPERATION allows one technician to perform the brake job quickly and efficiently.
  • RIGHT OR LEFT HAND WIND-BACK OPERATION for rear brake caliper pistons.
  • 15 PIECE ADAPTER SET allows for a large range of single piston brake calipers including GM, Honda, AUDI, FIAT, ALFA ROMEO, FORD, ISUZU, JAGUAR, BMW, MERCEDES BENZ, MITSUBISHI, TOYOTA, VOLVO, MAZDA, SAAB, NISSAN VW, SUBARU and more.
  • O-RING PROTECTED SHAFT to maintain proper pressure.
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

EWK Brake Caliper Press Tool Piston Spreader Pad 360 Degree Swing Ratchet with 2 Pcs Steel Plates

  • 【 Versatile Tool 】 EWK brake caliper press tool comes with two pairs of press plates: 4.53x2.24 inches and 5.79x3.36 inches. Ideal for most large trucks and commercial vehicles with single, double, and four side pistons brake caliper..
  • 【 Time & Effort Saver 】 360-degree swing design makes the brake caliper compression tool easy to insert into the caliper and use from any direction..
  • 【Easy to Use】 Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components..
  • 【 Ratcheting Design 】 Because of the ratcheting mechanism, you will need to apply some pressure to squeeze the spreaders inward, then you are able to spread the brake tool to fit into your caliper. Fully retract: 1.59”.
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Lang Tools 277 Brake Caliper Press

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock