Reviews Brake Pad Tester Tool
NEXPEAK Professional OBD2 Scanner NX501 with Brake Fluid Tester Pen
- ...erts, turn-off the Malfunction Indicator Lamp (MIL), and locate bad O2 sensors. It also empowers you to proactively monitor car battery health status, alerting you when it’s time to replace your battery. It’s the perfect scan tool for fixing and maintaining your car, helping you save time and money..
- Brake Fluid Tester: Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or not. Keep safe driving..
- Brake Fluid Tester: Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
- OBDII Scan Tool: Wide Array of Compatibility: Accurately read and erase error codes on all OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). The NEXPEAK NX501 is compatible with most US vehicles that are model year 1996 or later – including sedans, SUVs, light trucks, and 12V diesels. This is a plug-and-play engine diagnostic code reader (both generic and manufacturer specific codes) – no extra batteries or apps required..
- Free Updates and More: Each NEXPEAK NX501 scanner comes with free lifetime smart update service. Our built-in memory card allows you to st....
Check StockAutomotive Brake Fluid Detector - Universal Car Brake Fluid Tester with High-Precision Probe for Auto DOT3 DOT4 DOT5.1 Hydraulic Fluid/Liquid/Oil Moisture Analyzer
- 【You Must Have】Brake pressure was transmited by brake fluid, the pressure transmit will out of function once brake fluid include too water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition..
- 【Scope of Application】Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. It's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops..
- 【Brake Fluid Tester】When the brake oil moisture content is detected, the LED indicator will lights up. The brake fluid tester will emit a “beep”alarm when the water content exceeds 3% of the red light. The alarm is loud and stereoscopic, allowing you to easily measure even in noisy environments..
- 【Special Design】High resolution LCD display with backlit provides an intuitive interface for easy reading data even in the dark. The fuselage has good texture, one button and one function, easy to operate. Buzzing alarm system, test result is clear absolutely..
- 【Ideal Tool】The automotive brake fluid tester has 250mm goo....
Check StockZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen
- Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
- the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
- LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
- Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
- Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check StockABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set
- SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
- This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
- FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
- Press bearings and races into an open hub wheel assembly on most European and American cars.
- Some tools in the kit are disk brake specific, such as the caliper piston retractor.
- If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
- BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
- The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
- Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
- EASY STORAGE: No longer will you need to worry about y....
Check Stock2 Pairs Road Brake Pads with Installation Tool Caliper Brake Blocks 50 mm
- 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions.
- Size: the road brake pad is about 50 mm/ 1.97 inch in length.
- Each piece has a nut and a spacer, it's easy to remove and install with the tool.
- V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
- Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
- Each pair c brake pad has left and right part, without front and rear, every piece brake pad has a text mark.
- Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
- Come with the lightweight tool for easy installation.
Check StockKent. 20 Girls Trouble Aqua/black Bicycle
- 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
- Size: the road brake pad is about 50 mm/ 1.97 inch in length.
- Each piece has a nut and a spacer, it's easy to remove and install with the tool.
- V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
- Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
- Each pair c brake pad has left and right part, without front....
- Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
- Come with the lightweight tool for easy installation.
Check StockABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool
- BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
- Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
- Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
- It is suggested to lubricate between uses.
- 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
- Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
- This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
- Works on both fixed and floating calipers.
- RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
- Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
- Reverse tool movement to retract compression p....
Check StockABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool
- PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
- These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
- SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
- EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
- The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
- BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
- Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
- The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check StockYSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks
- Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
- YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
- Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check StockVXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators
- ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
- ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
- ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
- ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
- ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock