Reviews Brake Oil Changer

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

EWK Patented 10.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • ... tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)

  • ... tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

Park Tool BKD-1 - Hydraulic Brake Bleed Kit for DOT Fluid

  • ▶▶The low resistance oiler is made of plastic steel and its chemical stability exceeds m-edical standards.All-round disc brake oil change tool kit..
  • ▶▶All-round disc brake oil change tool kit. View the various brake oil video tutorials by scanning the QR code on the mobile phone.
  • ▶▶A chemically stable low resistivity injector can provide an objective smoothness even when pushing a high consistency shock absorber without decay due to prolonged use.
  • ▶▶【Two Types Of Oil Storage】Filling Cylinder And Funnel, Which Can Deal With The Brake Handle Of Any Structure Flexibly. Can Be Used To Collect Waste Oil When The Bottle Is Linked To The Caliper..
  • ▶▶View the various brake oil video tutorials by scanning the QR code on the mobile phone..
Check Stock

Silver Stainless Steel Brake Caliper/Master Cylinder/Clutch Slave Cylinder Bleed/Banjo Valve Kit for Brembo on Ducati/Aprilia/Moto Guzzi/KTM

  • Replaces Manufacturer Part Number:1911113 / 1910790 / 1910301.
  • Compatible with: Sportsman 335 1999-2000.
  • The mounting hole is 6.5MM, and the center distance of the mounting hole is 38MM..
  • The live cylinder diameter of the brake pump is 12.7MM, and the oil pipe screw is 10MM..
  • When installing, you must loosen the oil drain screw of the pump under the brake, and continuously press the brake foot brake pump to generate pressure, so that the oil of the brake pump passes through the oil pipe, enters the brake pump, discharges the air, and then tightens the oil drain screw. The brake system does not work without exhausting air.
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

Brake Bleed Kit Bicycle Hydraulic Disc Brake Oil Mineral for Shimano, MAGURA, TEKTRO, SRAM Series Bike Brake Repair Tools

  • ▶▶The low resistance oiler is made of plastic steel and its chemical stability exceeds m-edical standards.All-round disc brake oil change tool kit..
  • ▶▶All-round disc brake oil change tool kit. View the various brake oil video tutorials by scanning the QR code on the mobile phone.
  • ▶▶A chemically stable low resistivity injector can provide an objective smoothness even when pushing a high consistency shock absorber without decay due to prolonged use.
  • ▶▶【Two Types Of Oil Storage】Filling Cylinder And Funnel, Which Can Deal With The Brake Handle Of Any Structure Flexibly. Can Be Used To Collect Waste Oil When The Bottle Is Linked To The Caliper..
  • ▶▶View the various brake oil video tutorials by scanning the QR code on the mobile phone..
Check Stock