Reviews Brake Measuring Gauge

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

• ...ange Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
• 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the camber gauge is smaller than that of the products on the market,which can ensure higher accuracy,but the suction is still stable.When attaching the camber gauge to the brake disc,adjusting the positioning bubble to the center can make the test more accurate..
• 【“Zero” Reset Key & Data Record of Wheel Alignment & Balancing Tools】The digital camber gauge is designed with a reset button. Press the "ZERO" key to reset. And then you can adjust the eccentric bolt to make the camber alignment tool reach to the expected value. After r....

Pocket Tech Gauge 16ths

• Brake Measuring Gauge in 16ths. All Stainless Steel, Laser Cut, Laser Engraved. Made in the USA!.

ARES 70924-8-Piece Brake Pad Gauge Tool Set 20-Gauge Sheet Metal - Corrosion Resistant High Visibility Powder Coat Finish

• SET INCLUDES: This Brake Gauge Tool Set includes eight brake gauges designed to help identify if a vehicle has sufficient brake lining in the following metric/SAE sizes: 2mm (0.0787 inches), 3mm (0.1181 inches), 4mm (0.1575 inches), 5mm (0.1969 inches), 6mm (0.2362 inches), 8mm (0.3150 inches), 10mm (0.3937 inches), and 12mm (0.4724 inches)..
• QUALITY: These brake gauge tools are constructed of 20-gauge sheet metal with a red, yellow, or green durable powder coat for easy identification of brake lining that needs to be replaced and are held together by a heavy-duty rivet, so you'll never have to search for a piece of this handy set..
• APPLICATION: This brake gauge set can be used to quickly and easily identify brake lining that needs to be replaced in any vehicle, from light cars and trucks to heavy duty transportation vehicles. The green brake gauges indicate that the brake lining is in good condition. The yellow indicate that service may be needed, and the red indicate that the brake pads or shoes should be changed immediately..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 8-Piece Brake Gauge Tool Set, simply conta....

Tanstic 16Pcs Tire Tread Depth Gauge and Brake Lining Thickness Gauge Set, Come with Tire Pressure Gauge and Tire Valve Caps

• ☀[Package Includes] You'll get 1 set of brake lining thickness gauge(8pcs), 3pcs tire tread depth gauge, 2pcs tire pressure gauge and 10pcs tire valve caps..
• ☀[Brake Lining Thickness Gauge] Brake lining thickness gauge is designed for detecting the thickness of brake pads quickly and accurately. And the purpose of color coded design is to match SAE or Metric recommendations for effective and efficient brake pad measurement..
• ☀[Tire Tread Depth Gauge] Tire tread depth gauge can be used to measure tire tread depth accurately, and the color coded design can clearly distinguish the different phase of tire. Suitable for trucks, automobiles, motorcycles or other vehicles. You just need to put the tire tread depth gauge perpendicular to the tire surface, and then press down until needle touches the tire, and finally look straight and read the data horizontally..
• ☀[Tire Pressure Gauge] Tire pressure gauge can be used to measure tire pressure accurately and it is designed with 45 degree angle single head for easy operation. You just need to twist off the tire valve cap, press the mechanical tire gage chuck to the valve, then the scale plate will slip out and you can read the tire pressure from the scale plate..
• ☀[Tire Valve Cap] 10pcs tire valve caps ar....

Milton 942 8-Piece Manual Brake Pad Gauge Metric/SAE Tool Set, Easy to Read Color Coded - 2mm to 12mm

• Usable Range:This brake gauge set can be used to both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation..
• Blade Sizes：This Brake Gauge Tool Set includes eight brake，each gauge blade has both Metric & SAE，Three green (0.4724, 0.3937, 0.3150 inch & 12, 10, 8 mm ), Three yellow (0.2362, 0.1969, 0.1575 inch & 6, 5, 4 mm ), and Two red (0.1181, 0.0787 inch & 3, 2 mm)..
• Quality：This brake meter tool comes with a durable powder coating in three colors for easily identify the brake liner that needs to be replaced and hold it together with heavy duty rivets..
• Color Function：The green brake gauges indicate that the brake lining is in good condition. The yellow indicate that service may be needed, and the red indicate that the brake pads or shoes should be changed immediately..
• Exquisite Packaging：With an exclusive design of the exquisite paper card, easy to hang, as a gift to customers in need..

SAFELIFE Digital Tire Tread Depth Gauge, 3 Modes-Fractional Inch, Decimal Inch and Millimeter, Zeroable Tire Tread Depth Gauge for Motorcycles,Cars,Trucks,Vans,SUV Accurate Tyre Tread Depth Gauge

• 3 MODES READABLE RANGE: Accuracy tire tread depth gauge has One-touch switch for Metric MM and SAE with option of decimal or fractional inch interchange. Readable range - able to show tread depth from 0-25.4mm in metric or 0-1-inch in sae (32/32-inch)..
• ZEROABLE and BATTERY SAVE: Depth Gauge can be zeroed at any position for easy adjustment and precision readings. to preserve the included 3V CR2032 battery, the gauge will automatically shut off after 5 minutes of inactivity..
• LARGE LCD DISPLAY: Digital screen makes tire depth gauge easier to read. The depth bar with scale, also can be meansuread the tire depth when the digital tire tread depth gauge's battery has run down..
• WIDELY USAGE: Tread depth gauge suitable for all vehicle tires, truck, car, moto, pick-up measuring tread depth and brake pad wear.
• minimizing tire surface damage and car accidents. Compact and portable design fits easily into a pocket or tool pouch..
• ENSURE YOUR SAFTY:Normaly Driving Least 1.6mm. Always High Speed Condition Least 3mm. Driving in Rainy and Snowy Weather Least 4mm.Always be Safe.

VEVOR Sheet Metal Brake 36 In. Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees & WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear

• Product 1: Mini Metal Sheet Brake: Max. Bending width: 36 inches/910 mm.
• Max. Bending thickness: 0.04 inches/1 mm. Our metal sheet brake is a great tool to bend your metal sheets, with its extraordinary bending performance making itself quite a necessary tool in factories and workshops..
• Product 1: 0-90° Flexible Bending: You can adjust to a specific angle between 0° and 90° according to your work needs. The metal bender brake is ideal for bending heavy foils and light gauge metals. Bending material gauge up to 20 gauge mild steel & 14 gauge aluminum..
• Product 1: Two C-Shaped Clamps & Knobs: Effortless bending can be achieved through adjusting two lengthen handles. Pre-drilled touting holes allow mounting on the bench. And two C-shaped clamps are provided.
• you can fix the brake with clamps conveniently..
• Product 1: Heavy Steel Construction: The sheet metal bending brake is well-built with premium steel. Solid construction will stand for many years of heavy use. And it's compact and portable.
• you can easily bring it from home to your job site..
• Product 2: Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute.
• Product 2: Attack up to 20 gauge stainless steel and 18 gauge sheet metal.
• Product 2: Lightweight design limits fatigue d....

DHA Handheld Vacuum Pump Brake Bleeder Kit with Pressure Tester Gauge Adapters Set, Manual Pressure Bleed Brake Clutch System Fluid Vacuum Bleeder Bleeding Tool Kit Car Motorcycle Motorbike One Person

• One man brake bleeding kit with check valve could be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid..
• Automotive abs brake bleeder vacuum pump: Equipped with vacuum gauge, simple operation, convenient readout of pressure Gauge. Pressure range: 0-30inHg, 0-760mmHg. Can test and diagnose a wide variety of brake systems on motorcycle car truck..
• Brake Fluid bleeder set includes: hand pump with gauge, reservoir jar with 2 lids, 4 transparent hoses, 8 adapters and blow molding case..
• Carry Case is made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage..
• We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..

• 【Locking Mechanism Contour Gauge】Goxawee contour gauge duplicator goes with locking mechanism, it can keep the shape with no move out of form,....
• 【High Precision Profile Copy Gauge】This shaping gauge has high precision and the single needle down to 0.05 inch, which can provide you a more....
• 【Instant Template for Irregular Shape】This measuring tool makes cutting and measuring become easier. With the easy-moving needles, it can perfect....
• 【Premium ABS Material Measuring Tool】It is made by durable and stable ABS plastic, and no harm for the surface of the target you would like to....
• 【Easy to Use Shape Duplicator Tool】Only 3 steps, you can easily copy and transfer the shape you want, and also, the two size measuring tools can....

EKUZO Digital Tire Tread Depth Gauge Measurement Tool Support Fractional Inch Metric Millimetre Measure,Car Tires Tester for SUV Van Truck Roadster Motorcycles (with Backup Battery)

• Fraction display update - now it's able to display not only the inches and mm,but also the value in 32nds,64nds and 128nds （NOTE: random display FRAC,NOT always 32nds!).
• Professional precise measurement - design for different car tires tread measurement and also suitable for brake shoe,pad wear.
• Better reading - Digital LED Large screen,measuring range value 0-25.4 mm.
• Smart chip - automatic power off when the gauge was not used and this car tire gauge can be zeroed at any position for easier adjustment.
• Pre-installed battery and comes with one more backup battery,no need to worry about the suspension of work..